# This is the nebula example configuration file. You must edit, at a minimum, the static_host_map, lighthouse, and firewall sections # Some options in this file are HUPable, including the pki section. (A HUP will reload credentials from disk without affecting existing tunnels) # PKI defines the location of credentials for this node. Each of these can also be inlined by using the yaml ": |" syntax. pki: # The CAs that are accepted by this node. Must contain one or more certificates created by 'nebula-cert ca' ca: /etc/nebula/ca.crt cert: /etc/nebula/host.crt key: /etc/nebula/host.key #blacklist is a list of certificate fingerprints that we will refuse to talk to #blacklist: # - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72 # The static host map defines a set of hosts with fixed IP addresses on the internet (or any network). # A host can have multiple fixed IP addresses defined here, and nebula will try each when establishing a tunnel. # The syntax is: # "{nebula ip}": ["{routable ip/dns name}:{routable port}"] # Example, if your lighthouse has the nebula IP of 192.168.100.1 and has the real ip address of 100.64.22.11 and runs on port 4242: static_host_map: "192.168.100.1": ["100.64.22.11:4242"] lighthouse: # am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes # you have configured to be lighthouses in your network am_lighthouse: false # serve_dns optionally starts a dns listener that responds to various queries and can even be # delegated to for resolution #serve_dns: false #dns: # The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP. #host: 0.0.0.0 #port: 53 # interval is the number of seconds between updates from this node to a lighthouse. # during updates, a node sends information about its current IP addresses to each node. interval: 60 # hosts is a list of lighthouse hosts this node should report to and query from # IMPORTANT: THIS SHOULD BE EMPTY ON LIGHTHOUSE NODES # IMPORTANT2: THIS SHOULD BE LIGHTHOUSES' NEBULA IPs, NOT LIGHTHOUSES' REAL ROUTABLE IPs hosts: - "192.168.100.1" # remote_allow_list allows you to control ip ranges that this node will # consider when handshaking to another node. By default, any remote IPs are # allowed. You can provide CIDRs here with `true` to allow and `false` to # deny. The most specific CIDR rule applies to each remote. If all rules are # "allow", the default will be "deny", and vice-versa. If both "allow" and # "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the # default. #remote_allow_list: # Example to block IPs from this subnet from being used for remote IPs. #"172.16.0.0/12": false # A more complicated example, allow public IPs but only private IPs from a specific subnet #"0.0.0.0/0": true #"10.0.0.0/8": false #"10.42.42.0/24": true # local_allow_list allows you to filter which local IP addresses we advertise # to the lighthouses. This uses the same logic as `remote_allow_list`, but # additionally, you can specify an `interfaces` map of regular expressions # to match against interface names. The regexp must match the entire name. # All interface rules must be either true or false (and the default will be # the inverse). CIDR rules are matched after interface name rules. # Default is all local IP addresses. #local_allow_list: # Example to blacklist tun0 and all docker interfaces. #interfaces: #tun0: false #'docker.*': false # Example to only advertise this subnet to the lighthouse. #"10.0.0.0/8": true # Port Nebula will be listening on. The default here is 4242. For a lighthouse node, the port should be defined, # however using port 0 will dynamically assign a port and is recommended for roaming nodes. listen: host: 0.0.0.0 port: 4242 # Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg) # default is 64, does not support reload #batch: 64 # Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel # Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default) # Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide # max, net.core.rmem_max and net.core.wmem_max #read_buffer: 10485760 #write_buffer: 10485760 punchy: # Continues to punch inbound/outbound at a regular interval to avoid expiration of firewall nat mappings punch: true # respond means that a node you are trying to reach will connect back out to you if your hole punching fails # this is extremely useful if one node is behind a difficult nat, such as a symmetric NAT # Default is false #respond: true # delays a punch response for misbehaving NATs, default is 1 second, respond must be true to take effect #delay: 1s # Cipher allows you to choose between the available ciphers for your network. # IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously! #cipher: chachapoly # Local range is used to define a hint about the local network range, which speeds up discovering the fastest # path to a network adjacent nebula node. #local_range: "172.16.0.0/24" # sshd can expose informational and administrative functions via ssh this is a #sshd: # Toggles the feature #enabled: true # Host and port to listen on, port 22 is not allowed for your safety #listen: 127.0.0.1:2222 # A file containing the ssh host private key to use # A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null #host_key: ./ssh_host_ed25519_key # A file containing a list of authorized public keys #authorized_users: #- user: steeeeve # keys can be an array of strings or single string #keys: #- "ssh public key string" # Configure the private interface. Note: addr is baked into the nebula certificate tun: # Name of the device dev: nebula1 # Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert drop_local_broadcast: false # Toggles forwarding of multicast packets drop_multicast: false # Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 500 tx_queue: 500 # Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic mtu: 1300 # Route based MTU overrides, you have known vpn ip paths that can support larger MTUs you can increase/decrease them here routes: #- mtu: 8800 # route: 10.0.0.0/16 # Unsafe routes allows you to route traffic over nebula to non-nebula nodes # Unsafe routes should be avoided unless you have hosts/services that cannot run nebula # NOTE: The nebula certificate of the "via" node *MUST* have the "route" defined as a subnet in its certificate unsafe_routes: #- route: 172.16.1.0/24 # via: 192.168.100.99 # mtu: 1300 #mtu will default to tun mtu if this option is not sepcified # TODO # Configure logging level logging: # panic, fatal, error, warning, info, or debug. Default is info level: info # json or text formats currently available. Default is text format: text # timestamp format is specified in Go time format, see: # https://golang.org/pkg/time/#pkg-constants # default when `format: json`: "2006-01-02T15:04:05Z07:00" (RFC3339) # default when `format: text`: # when TTY attached: seconds since beginning of execution # otherwise: "2006-01-02T15:04:05Z07:00" (RFC3339) # As an example, to log as RFC3339 with millisecond precision, set to: #timestamp_format: "2006-01-02T15:04:05.000Z07:00" #stats: #type: graphite #prefix: nebula #protocol: tcp #host: 127.0.0.1:9999 #interval: 10s #type: prometheus #listen: 127.0.0.1:8080 #path: /metrics #namespace: prometheusns #subsystem: nebula #interval: 10s # Handshake Manger Settings #handshakes: # Total time to try a handshake = sequence of `try_interval * retries` # With 100ms interval and 20 retries it is 23.5 seconds #try_interval: 100ms #retries: 20 # wait_rotation is the number of handshake attempts to do before starting to try non-local IP addresses #wait_rotation: 5 # Nebula security group configuration firewall: conntrack: tcp_timeout: 120h udp_timeout: 3m default_timeout: 10m max_connections: 100000 # The firewall is default deny. There is no way to write a deny rule. # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr) # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available). # code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any` # proto: `any`, `tcp`, `udp`, or `icmp` # host: `any` or a literal hostname, ie `test-host` # group: `any` or a literal group name, ie `default-group` # groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass # cidr: a CIDR, `0.0.0.0/0` is any. # ca_name: An issuing CA name # ca_sha: An issuing CA shasum outbound: # Allow all outbound traffic from this node - port: any proto: any host: any inbound: # Allow icmp between any nebula hosts - port: any proto: icmp host: any # Allow tcp/443 from any host with BOTH laptop and home group - port: 443 proto: tcp groups: - laptop - home