Commit Graph

26 Commits

Author SHA1 Message Date
James Bardin 2fe0f9376a change "preferDst" to "apply" in normalizeNullVals
Inverting this and renaming it makes it align with the current use of
that boolean argument.
2019-04-23 12:59:30 -04:00
James Bardin 0696cf7245 don't retain removed map values
Make sure values removed from a map during apply are not copied into the
new map. The broken test is no longer valid in this case, and the
updated diff.Apply should prevent the case it used to cover.
2019-04-23 12:49:58 -04:00
James Bardin f5395bd98a validate null values in shimmed configs
A list-like attribute containing null values will present a list to
helper/schema with nils, which can cause panics. Since null values were
not possible in configuration before HCL2 and not supported by the
legacy SDK, return an error to the user.
2019-04-03 11:10:24 -04:00
James Bardin 64c76be804 fixup lost collections containing unknowns
It turns out that collections containing only unknowns could be lost,
meaning there wasn't a direct correlation between the unknown and null
value which would have otherwise been restored.
2019-03-29 14:54:54 -04:00
James Bardin 86e30add98 fix unknowns added to maps by schemaMap
The legacy diff process inserts unknown values into an optional+computed
map. Fix these up in post-plan normalization process, by looking for
known strings that were changed to unknown.
2019-03-29 13:56:43 -04:00
James Bardin 11ec3a420e remove normalizeFlatmapContainers
This method was added early on when the diff was being applied as the
legacy code would have done, which is no longer the case. Everything
that normalizeFlatmapContainers does should be covered by the
combination of the initial diff.Apply and the normalizeNullValues on the
final cty.Value.
2019-03-12 12:04:35 -04:00
James Bardin 9d4bb6ec14 stop removing empty flatmap containers
As we've improved the cty.Value normalization, we need to remove
normalization procedures from the flatmap handling. Keeping the empty
containers in the flatmap will prevent unexpected nils from being added
to some schema configurations
2019-03-11 15:14:29 -04:00
James Bardin 2b4d030a69 don't re-add removed list values even when planned
Providers were not strict (and were not forced to be) about customizing
the diff when a computed attribute needed to be updated during apply.
The fix we have in place to prevent loss of information during the
helper/schema apply process would add in single missing value back in.

The first place this was caught was when we attempt to fix up the
flatmapped attributes. The 1->0 count error is now better handled by our
cty.Value normalization step, so we can remove the special apply case
here altogether

The next place is in normalizeNullValues, and since the intent was to
re-insert missing zero-value lists and sets, adding a check for a length
of 0 protects us from adding in extra elements.

The new test fixture emulated common provider behavior of re-computing
values without customizing the diff. Since we can work around it, and
core will provider appropriate warnings, the shims should try to
maintain the legacy behavior.
2019-03-05 15:31:08 -05:00
James Bardin 9a39af5047 1->0 set changes non longer should happen in Read
The new normalization should make preventing those changes unnecessary,
and will also prevent extra empty elements from being added when
resources are refreshed.
2019-02-28 17:47:11 -05:00
Martin Atkins fedbd6c3b8 helper/plugin: fix panic with empty objects in normalizeNullValues
cty.Value.AsValueMap can return nil if called on an empty map or object.
The logic above was dealing with that case for maps, but object types
were falling through into this codepath and panicking when trying to
assign a new key into the nil dstMap.

This also includes a bonus fix where we were calling ty.ElementType in
a switch case that accepts object types. Object types don't have a single
element type, so we can't call ElementType on those (that also panics)
but we _can_ use the type of the value we selected from src to construct
our placeholder null value.
2019-02-13 15:56:12 -08:00
James Bardin ba081f5de4 change copyMissingValues to normalizeNullValues
While copyMissingValues was meant to re-insert empty values that were
null after apply, it turns out plan is sometimes not predictable as
well.

normalizeNullValue is meant to fix up any null/empty transitions between
to values, and be useful during plan as well. For plan the function only
concerns itself with individual, known values, and skips sets entirely.
The result of running with plan == true is that only changes between
empty and null collections should be fixed.
2019-01-31 19:02:39 -05:00
James Bardin 4f691c5988 don't replace null strings with empty strings
This adds unexpected values in some cases, and since the case this
handles is only within set objects, we'll deal woth this when tackling
the sets themselves.
2019-01-17 19:19:13 -05:00
James Bardin b55ec74c27 add copyMissingValues for normalizing shimmed Vals
Zero values and empty containers can be lost during the shimming
process, and during the provider's Apply step.

If we have known zero value containers and primitives in the source,
which appear as null values in the destination, we copy over the zero
value. Sets (and lists to an extent) are more difficult, since there
before and after indexes may not correlate. In that case we take the
entire container if it's wholly known, expecting the provider to have
correctly handled the value.
2019-01-08 16:26:22 -05:00
James Bardin 8300d65539 don't strip sets with count 1 when normalizing
normalizeFlatmapContainers should retain sets with a count of 1, and
convert sets with a count of 0 if they were 1 before the Apply step.
2019-01-08 16:26:21 -05:00
James Bardin 5f9b189fcf catch conversion errors in PrepareProviderConfig
Errors were being ignore with the intention that they would be caught
later in validation, but it turns out we nee dto catch those earlier.

The legacy schemas also allowed providers to set and empty string for a
bool value, which we need to handle here, since it's not being handled
from user input like a normal config value.
2018-11-30 14:51:52 -05:00
James Bardin 6f4d86094f preserve possible zero values when normalizing
When normalizing flatmapped containers, compare the attributes to the
prior state and preserve pre-existing zero-length or unknown values. A
zero-length value that was previously unknown is preserved as a
zero-length value, as that may have been computed as such by the
provider.
2018-11-27 08:54:15 -05:00
James Bardin f375691819 add missing key-value from test 2018-11-19 18:58:29 -05:00
Martin Atkins 4fe9632f09 plugin: Establish our current plugin protocol as version 5
The main significant change here is that the package name for the proto
definition is "tfplugin5", which is important because this name is part
of the wire protocol for references to types defined in our package.

Along with that, we also move the generated package into "internal" to
make it explicit that importing the generated Go package from elsewhere is
not the right approach for externally-implemented SDKs, which should
instead vendor the proto definition they are using and generate their
own stubs to ensure that the wire protocol is the only hard dependency
between Terraform Core and plugins.

After this is merged, any provider binaries built against our
helper/schema package will need to be rebuilt so that they use the new
"tfplugin5" package name instead of "proto".

In a future commit we will include more elaborate and organized
documentation on how an external codebase might make use of our RPC
interface definition to implement an SDK, but the primary concern here
is to ensure we have the right wire package name before release.
2018-11-19 09:56:41 -08:00
James Bardin e95f2b586e another test case in helper/plugin 2018-11-16 15:12:16 -05:00
James Bardin 17ecda53b5 strip empty containers from flatmap attributes
In order to prevent mismatched states between read/plan/apply, we need
to ensure that the attributes are generated consistently each time.
Because of the various ways in which helper/schema and the hcl2 shims
interpret empty values, the only way to ensure consistency is to always
remove them altogether.
2018-11-16 09:59:03 -05:00
James Bardin 6dad121e70 insert resource timeouts into the config schema
Resource timeouts were a separate config block, but did not exist in the
resource schema. Insert any defined timeouts when generating the
configshema.Block so that the fields can be accepted and validated by
core.
2018-10-30 13:14:08 -04:00
James Bardin a8f75bc554 don't set defaults for deprecated or removed
These may still have defaults set, even if they are not intended to be
used.
2018-10-18 12:45:55 -04:00
James Bardin e077c9ce95 Insert default values into provider config
Add any top-level default attributes from the provider schema into Null
config values.
2018-10-18 11:40:47 -04:00
James Bardin caf74a218d initialize empty diff in apply
While the schema Diff fucntion returns a nil diff when creating an empty
(except for id) resource, the Apply function expects the diff to be
initialized and ampty.
2018-10-16 19:14:11 -07:00
James Bardin 0b8c38207a a plan with no diff should return proposed state
PlanResourceChange isn't returning the diff, but rather it is returning
the destired state. If the propsed state results in a nil diff, then,
the propsed state is what should be returned.

Make sure Meta fields are not nil, as the schema package expects those
to be initialised.
2018-10-16 19:14:11 -07:00
James Bardin 63dcdbe948 helper/plugin package for grpc servers
The new helper/plugin package contains the grpc servers for handling the
new plugin protocol

The GRPCProviderServer and GRPCProvisionerServer handle the grpc plugin
protocol, and convert the requests to the legacy schema.Provider and
schema.Provisioner methods.
2018-10-16 18:58:49 -07:00