Commit Graph

1084 Commits

Author SHA1 Message Date
James Bardin 82588af892 switch blocks based on value type, and check attrs
Check attributes on null objects, and fill in unknowns. If we're
evaluating the object, it either means we are at the top level, or a
NestingSingle block was present, and in either case we need to treat the
attributes as null rather than the entire object.

Switch on the block types rather than Nesting, so we don't need add any
logic to change between List/Tuple or Map/Object when DynamicPseudoType
is involved.
2019-02-08 14:46:29 -05:00
James Bardin 32671241e0 set unknowns during initial PlanResourceChange
If ID is not set, make sure it's unknown.

Use SetUnknowns to set the rest of the computed values to Unknown.
2019-02-07 20:29:24 -05:00
James Bardin d17ba647a8 add SetUnknowns
SetUnknown walks through a resource and changes any unset (null) values
that are going computed in the schema to Unknown.
2019-02-07 20:24:36 -05:00
Martin Atkins 1530fe52f7 core: Legacy SDK providers opt out of our new apply result check
The shim layer for the legacy SDK type system is not precise enough to
guarantee it will produce identical results between plan and apply. In
particular, values that are null during plan will often become zero-valued
during apply.

To avoid breaking those existing providers while still allowing us to
introduce this check in the future, we'll introduce a rather-hacky new
flag that allows the legacy SDK to signal that it is the legacy SDK and
thus disable the check.

Once we start phasing out the legacy SDK in favor of one that natively
understands our new type system, we can stop setting this flag and thus
get the additional safety of this check without breaking any
previously-released providers.

No other SDK is permitted to set this flag, and we will remove it if we
ever introduce protocol version 6 in future, assuming that any provider
supporting that protocol will always produce consistent results.
2019-02-06 11:40:30 -08:00
James Bardin 3b18dd7c01
Merge pull request #20224 from hashicorp/jbardin/sdk
SDK set fixes
2019-02-05 14:11:51 -05:00
James Bardin 8be864c1c7 don't allow computed set elems to be equal
If set elements are computed, we can't be certain that they are actually
equal. Catch identical computed set hashes when they are added to the
set, and alter the set key slightly to keep the set counts correct.

In previous versions the interpolation string would be included in the
set, and different string values would cause the set to hash
differently, so this is change is only activated for the new protocol.
2019-02-05 12:08:17 -05:00
James Bardin 58c9c2311a Turn on helper/schema proto5 flag in GetSchema
This turns it on at the last moment, and in one place for all uses of
helper/schema. There's no way to use the new protocol without calling
GetSchema, so we can be sure that any subsequent api calls have this set
when required.
2019-02-05 12:08:17 -05:00
James Bardin 55b4307767 add proto5 feature flag
Add feature flag to allow special proto 5 behavior in helper/schema.
This is Meant to be used as a last resort for shim-related bugs.
2019-02-05 12:08:16 -05:00
James Bardin 81a4e705b1 DiffSuppressFunc should noop diffs in sets
Sets rely on diffs being complete for all elements, even when they are
unchanged. When encountering a DiffSuppressFunc inside a set the diffs
were being dropped entirely, possible causing set elements to be lost.
2019-02-05 12:08:16 -05:00
Martin Atkins bdcac8792d plugin: Use correct schema when marshaling imported resource objects
Previously we were using the type name requested in the import to select
the schema, but a provider is free to return additional objects of other
types as part of an import result, and so it's important that we perform
schema selection separately for each returned object.

If we don't do this, we get confusing downstream errors where the
resulting object decodes to the wrong type and breaks various invariants
expected by Terraform Core.

The testResourceImportOther test in the test provider didn't catch this
previously because it happened to have an identical schema to the other
resource type being imported. Now the schema is changed and also there's
a computed attribute we can set as part of the refresh phase to make sure
we're completing the Read call properly during import. Refresh was working
correctly, but we didn't have any tests for it as part of the import flow.
2019-02-01 15:22:54 -08:00
James Bardin 4a603011c5 don't normalizeNullValues in ReadResource
The required normalization now happens in PlanResourceChange, and this
function is no longer appropriate for ReadResource.
2019-02-01 17:21:37 -05:00
Martin Atkins 4c99864dad helper/resource: TestCheckResourceAttrPair allow nonexist
This checking helper is frequently used in provider tests for data
sources, as a shorthand to verify that an attribute of the data source
matches with the corresponding attribute on a managed resource.

Since we now leave empty collections null in more cases, this function is
sometimes effectively asked to verify that a given attribute is _unset_
in both the data source and the resource, so here we slightly adjust the
definition of the check to consider two nulls to be equal to one another,
which at this layer manifests as the keys not being present in the state
attributes map at all.

This check function didn't previously have tests, so this commit also adds
a basic suite of tests, including coverage for the new behavior.
2019-02-01 08:24:43 -08:00
James Bardin ba081f5de4 change copyMissingValues to normalizeNullValues
While copyMissingValues was meant to re-insert empty values that were
null after apply, it turns out plan is sometimes not predictable as
well.

normalizeNullValue is meant to fix up any null/empty transitions between
to values, and be useful during plan as well. For plan the function only
concerns itself with individual, known values, and skips sets entirely.
The result of running with plan == true is that only changes between
empty and null collections should be fixed.
2019-01-31 19:02:39 -05:00
James Bardin 9cf8f48239 decode legacy timeouts
The new decoder is more precise, and unpacks the timeout block into a
single map, which ResourceTimeout.ConfigDecode was updated to handle.
We however still need to work with legacy versions of terraform, with
the old decoder.
2019-01-30 16:10:17 -05:00
James Bardin 3b04b41250 fix RequiresNew in diff
With the new diff.Apply we can keep the diff mostly intact, but we need
turn off all RequiresNew flags so that the prior state is not removed
from the apply.
2019-01-30 14:55:04 -05:00
Martin Atkins 477da57a92 helper/plugin: Honor resource type overrides in import
One quirky aspect of our import feature is that we allow the importer to
produce additional resources alongside the one that was imported, such as
to create separate rules for each rule of an imported security group.

Providers need to be able to set the types of these other resources since
they may not match the "main" resource type. They do this by calling
ResourceData.SetType, which in turn sets InstanceState.Ephemeral.Type.

In our shims here we therefore need to copy that out into our new TypeName
field so that the new core import code can see it and create the right
type in the state.

Testing this required a minor change to the test harness to allow the
ImportStateCheck function to see the resource type.
2019-01-30 09:05:08 -08:00
Paul Tyng bb9ae50279
Copy TF version to helper/schema provider 2019-01-28 14:38:49 -05:00
Martin Atkins ae0be75ae0 helper/schema: TypeMap of Resource is actually of TypeString
Historically helper/schema did not support non-primitive map attributes
because they cannot be represented unambiguously in flatmap. When we
initially implemented CoreConfigSchema here we mapped that situation to
a nested block of mode NestingMap, even though that'd never worked until
now, assuming that it'd be harmless because providers wouldn't be using
it.

It turns out that some providers are, in fact, incorrectly populating
a TypeMap schema with Elem: &schema.Resource, apparently under the false
assumption that it would constrain the keys allowed in the map. In
practice, helper/schema has just been ignoring this and treating such
attributes as map of string. (#20076)

In order to preserve the behavior of these existing incorrectly-specified
attribute definitions, here we mimic the helper/schema behavior by
presenting as an attribute of type map(string).

These attributes have also been shown in some documentation as nested
blocks (with no equals sign), so that'll need to be fixed in user
configurations as they upgrade to Terraform 0.12. However, the existing
upgrade tool rules will take care of that as a natural consequence of the
name being indicated as an attribute in the schema, rather than as a block
type.

This fixes #20076.
2019-01-25 14:12:58 -08:00
James Bardin 37b5e2dc87 don't remove empty diff values
Our new diff handling no longer requires stripping the empty diffs out,
and provider may be relying on some of the empty-value quirks in
helper/schema.
2019-01-23 17:33:23 -05:00
James Bardin 46a4628782
Merge pull request #20081 from hashicorp/jbardin/list-block
New Diff.Apply method
2019-01-22 19:20:53 -05:00
Martin Atkins f65b7c5372 helper/plugin: Discard meaningless differences from provider planning
Due to various inprecisions in the old SDK implementation, applying the
generated diff can potentially make changes to the data structure that
have no real effect, such as replacing an empty list with a null list or
vice-versa.

Although we can't totally eliminate such diff noise, here we attempt to
avoid it in situations where there are _only_ meaningless changes -- where
the prior state and planned state are equivalent -- by just echoing back
the prior state verbatim to ensure that Terraform will treat it as a noop
change.

If there _are_ some legitimate changes then the result may still contain
meaningless changes alongside it, but that is just a cosmetic problem for
the diff renderer, because the meaningless changes will be ignored
altogether during a subsequent apply anyway. The primary goal here is just
to ensure we can converge on a fixpoint when there are no explicit changes
in the configuration.
2019-01-22 15:41:10 -08:00
James Bardin 8d302c5bd2 update grpc_provider for new diffs
Keep the diff as-is before applying.
2019-01-22 18:10:12 -05:00
James Bardin 286cb0a39d clean out diff a little more before checking
Check if there wasn't any real diff attributes first, before returning
the original state in PlanResourceChange.
2019-01-17 19:19:13 -05:00
James Bardin 4f691c5988 don't replace null strings with empty strings
This adds unexpected values in some cases, and since the case this
handles is only within set objects, we'll deal woth this when tackling
the sets themselves.
2019-01-17 19:19:13 -05:00
James Bardin 2cc651124e don't overwrite values in plan
Plan can change known values too, which we can't match in sets. We'll
find another way to normalize these eithout losing plan values.
2019-01-17 18:51:18 -05:00
James Bardin 7d05dee08d refactor ApplyResourceChange
Remove a bunch of indentation by returning early, and make sure we don't
fail on non-fatal error without saving the applied value.
2019-01-15 12:35:58 -05:00
James Bardin 0a731167db add a round trip through the shims during apply
Cycle through the shim operations after Apply, to ensure that we can
converge on a stable value for for Plan. While the shims produce valid
values in both directions, helper/schema sometimes does not agree on
which containers should be empty or null.
2019-01-15 11:59:15 -05:00
Martin Atkins 86c02d5c35 command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.

This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.

In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.

Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.

The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
  configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
  excludes Terraform versions prior to v0.12 then the configuration is
  probably _already_ upgraded and so it's just a normal syntax error,
  even if the early loader didn't detect it.

Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 11:33:21 -08:00
Martin Atkins 0c0a437bcb Move module install functionality over to internal/initwd 2019-01-14 11:33:21 -08:00
James Bardin 041ed67e46 type names don't imply the resource mode
The addr type doesn't imply the resource mode, so data sources and
managed resources with the same type name could shim incorrectly.
2019-01-12 11:43:48 -05:00
James Bardin e8096e9c8b normalize values during ReadResource
Match the normalization behavior of Apply, so we don't end up causing
any diffs between zero values when refreshing resources.
2019-01-12 10:41:04 -05:00
James Bardin bc5eecd7f2 make sure id really gets set in SetId
SetId needs to overwrite the newState as well, since the internal calls
to DataSource.Id() will override the set attribute.
2019-01-10 20:28:11 -05:00
James Bardin a7b399cb4c use actual schema.Resources for state shims
Provider tests often rely on checking values contained within sets, by
directly accessing their flatmapped representation. In order to provider
the test harness with the expected set hashes, the sets must be
generated by the schema.Resource itself.

During the test we now build a fixed map of the providers, which should
only contain schema.Provider instances, and pass them into each
TestStep. The individual schema.Resource instances can then be pulled
from the providers, and used to recreate the state from the cty.Value
returned by the core operations.
2019-01-10 12:20:03 -05:00
James Bardin 7973872524 allow TestCheckNoResourceAttr for empty containers
Stricter type handling in the new shims may add empty containers into
the state where they were previously elided. Since the detection of
missing and empty containers in the legacy state was never reliable,
allow TestCheckNoResourceAttr to succeed if the key is a container count
index, and the value is "0"
2019-01-09 13:09:02 -05:00
James Bardin c63040c737 have TestCheckResourceAttr accept missing counts
Missing containers were often erroneously kept in the state, but since
the addition of the new provider shims, they can often be correctly
eliminated. There are however many tests that check for a "0" count in
the flatmap state when there shouldn't be a key at all. This addition
looks for a container count key and "0" pair, and allows for the key to
be missing.

There may be some tests negatively effected by this which were
legitimately checking for empty containers, but those were also not
reliably detected, and there should be much fewer tests involved.
2019-01-09 13:01:17 -05:00
James Bardin b55ec74c27 add copyMissingValues for normalizing shimmed Vals
Zero values and empty containers can be lost during the shimming
process, and during the provider's Apply step.

If we have known zero value containers and primitives in the source,
which appear as null values in the destination, we copy over the zero
value. Sets (and lists to an extent) are more difficult, since there
before and after indexes may not correlate. In that case we take the
entire container if it's wholly known, expecting the provider to have
correctly handled the value.
2019-01-08 16:26:22 -05:00
James Bardin 8300d65539 don't strip sets with count 1 when normalizing
normalizeFlatmapContainers should retain sets with a count of 1, and
convert sets with a count of 0 if they were 1 before the Apply step.
2019-01-08 16:26:21 -05:00
Martin Atkins cdad78d69b helper/resource: Allow multiple providers in a single TestCase
Due to incorrect use of a loop iterator variable inside a closure, all of
the given providers were ending up with the same factory function.
Now we copy the factory function to a local within the loop first so that
each iteration has its own variable.

This is the second round of similar bugs in this function, so we'll also
add a test case for it to reduce the risk of future regressions given that
most real callers don't exercise this with multiple providers in practice.
2019-01-07 16:58:36 -08:00
Martin Atkins b190d3b4f2 helper/resource: Shim back to old state must preserve schema version
We use a shim to convert from the new state model back to the old because
the provider test API is still using the old API throughout. However, the
shim was not preserving the schema version recorded in the new-style state
and so a round-trip through this shim would cause the schema versions to
all revert to zero.

This can cause trouble with the destroy phase of provider tests because
(for API legacy reasons) we round-trip from old state back to new again
before the destroy phase and thus causing the providers to try to upgrade
from state version zero even though the data was already latest, which
can cause errors because state upgrades are generally not idempotent.
2019-01-05 10:00:30 -08:00
Martin Atkins 06acc3f6c8 helper/schema: Skip validation of unknown values
With the introduction of explicit "null" in 0.12 it's possible for a value
that is unknown during plan to become a known null during apply, so we
need to slightly weaken our validation rules to accommodate that, in
particular skipping the validation of conflicting attributes if the result
could potentially be valid after the unknown values become known.

This change is in the codepath that is common to both 0.12 and 0.11
callers, but that's safe because 0.11 re-runs validation during the apply
step and so will still catch problems here, albeit in the apply step
rather than in the plan step, thus matching the 0.12 behavior. This new
behavior is a superset of the old in the sense that everything that was
valid before is still valid.

The implementation here also causes us to skip all other validation for
an attribute whose value is unknown. Most of the downstream validation
functions handle this directly anyway, but again this doesn't add any new
failure cases, and should clean up some of the rough edges we've seen with
unknown values in 0.11 once people upgrade to 0.12-compatible providers.
Any issues we now short-circuit during planning will still be caught
during apply.

While working on this I found that the existing "Not a list" test was not
actually testing the correct behavior, so this also includes a tweak to
that to ensure that it really is checking the "should be a list" path
rather than the "cannot be set" codepath it was inadvertently testing
before.
2019-01-04 14:46:47 -08:00
James Bardin 8ab5698e2a
Merge pull request #19587 from hashicorp/jbardin/safe-appends
don't modify argument slices
2018-12-10 15:10:02 -05:00
James Bardin 3d6ec09a83
Merge pull request #19552 from olindata/bugfix/setting-sets-in-list
helper/schema: Fix setting a set in a list caused error
2018-12-10 12:25:23 -05:00
James Bardin b5de50c0a2 don't modify argument slices
There were a couple spots where argument slices weren't being copied
before `append` was called, which could possibly modify the caller's
slice data.
2018-12-10 11:59:27 -05:00
Martin Atkins f9fef56167 helper/resource: print full diagnostics for operation errors in tests
This causes the output to include additional helpful context such as
the values of variables referenced in the config, etc. The output is in
the same format as normal Terraform CLI error output, though we don't
retain a source code cache in this codepath so it will not include a
source code snippet.
2018-12-07 17:05:36 -08:00
Martin Atkins 55469cd416 helper/resource: Get schemas from Terraform context
Previously the test harness was preloading schemas from the providers
before running any test steps.

Since terraform.NewContext already deals with loading provider schemas,
we can instead just use the schemas it loaded for our shimming needs,
avoiding the need to reimplement the schema lookup behavior and thus
the need to create a throwaway provider instance with which to do it.
2018-12-07 08:12:59 -08:00
Martin Atkins a4991c5780 helper/resource: Create a separate provider instance each call
Previously we were running the factory function only once when
constructing the provider resolver, which means that all contexts created
from that resolver share the same provider instance.

Instead now we will call the given factory function once for each
instantiation, ensuring that each caller ends up with a separate object
as would be the case in real-world use.
2018-12-07 08:12:59 -08:00
James Bardin 98870fadb1
Merge pull request #19544 from hashicorp/jbardin/import-tests
Fix provider import tests
2018-12-05 20:30:46 -05:00
James Bardin ac63d2995f
Merge pull request #19559 from hashicorp/jbardin/resource-test-shim
don't add numeric indexes to resources with a count of 0
2018-12-05 17:34:30 -05:00
James Bardin 7d296f752c don't add numeric indexes to resources with a count of 0 2018-12-05 13:41:53 -05:00
Farid Neshat 44a45b7332 helper/schema: Fix setting a set in a list
The added test in this commit, without the fix, will make d.Set return
the following error:

`Invalid address to set: []string{"ports", "0", "set"}`

This was due to the fact that setSet in feild_writer_map tried to
convert a slice into a set by creating a temp set schema and calling
writeField on that with the address(`[]string{"ports", "0", "set"}"` in
this case). However the temp schema was only for the set and not the
whole schema as seen in the address so, it should have been `[]string{"set"}"`
so it would align with the schema.

This commits adds another variable there(tempAddr) which will only
contain the last entry of the address that would be the set key, which
would match the created schema

This commit potentially fixes the problem described in #16331
2018-12-05 10:09:54 +01:00
Brian Flad 1e81a3e7fa
helper/schema: Always propagate NewComputed for previously zero value primative type attributes
When the following conditions were met:
* Schema attribute with a primative type (e.g. Type: TypeString) and Computed: true
* Old state of attribute set to zero value for type (e.g. "")
* Old state ID of resource set to non-empty (e.g. existing resource)

Attempting to use CustomizeDiff with SetNewComputed() would result in the difference  previously being discarded. This update ensures that previous zero values or resource existence does not influence the propagation of the computed update.

Previously:

```
--- FAIL: TestSetNewComputed (0.00s)
    --- FAIL: TestSetNewComputed/NewComputed_should_always_propagate (0.00s)
        resource_diff_test.go:684: Expected (*terraform.InstanceDiff)(0xc00051cea0)({
             mu: (sync.Mutex) {
              state: (int32) 0,
              sema: (uint32) 0
             },
             Attributes: (map[string]*terraform.ResourceAttrDiff) (len=1) {
              (string) (len=3) "foo": (*terraform.ResourceAttrDiff)(0xc0003dcec0)({
               Old: (string) "",
               New: (string) "",
               NewComputed: (bool) true,
               NewRemoved: (bool) false,
               NewExtra: (interface {}) <nil>,
               RequiresNew: (bool) false,
               Sensitive: (bool) false,
               Type: (terraform.DiffAttrType) 0
              })
             },
             Destroy: (bool) false,
             DestroyDeposed: (bool) false,
             DestroyTainted: (bool) false,
             Meta: (map[string]interface {}) <nil>
            })
            , got (*terraform.InstanceDiff)(0xc00051ce80)({
             mu: (sync.Mutex) {
              state: (int32) 0,
              sema: (uint32) 0
             },
             Attributes: (map[string]*terraform.ResourceAttrDiff) {
             },
             Destroy: (bool) false,
             DestroyDeposed: (bool) false,
             DestroyTainted: (bool) false,
             Meta: (map[string]interface {}) <nil>
            })

--- FAIL: TestSchemaMap_Diff (0.01s)
    --- FAIL: TestSchemaMap_Diff/79-NewComputed_should_always_propagate_with_CustomizeDiff (0.00s)
        schema_test.go:3289: expected:
            *terraform.InstanceDiff{mu:sync.Mutex{state:0, sema:0x0}, Attributes:map[string]*terraform.ResourceAttrDiff{"foo":*terraform.ResourceAttrDiff{Old:"", New:"", NewComputed:true, NewRemoved:false, NewExtra:interface {}(nil), RequiresNew:false, Sensitive:false, Type:0x0}}, Destroy:false, DestroyDeposed:false, DestroyTainted:false, Meta:map[string]interface {}(nil)}

            got:
            <nil>

FAIL
FAIL  github.com/hashicorp/terraform/helper/schema  0.825s
```
2018-12-04 22:48:30 -05:00
James Bardin 484d67028a handle shim errors in provider tests
These should be rare, and even though it's likely a shim bug, the error
is probably easier for provider developers to deal with than the
panic
2018-12-04 16:33:16 -05:00
James Bardin 547d63bcde remove empty flatmap containers from test states
Don't compare attributes with zero-length flatmap continers in tests.
2018-12-04 16:33:16 -05:00
James Bardin 924b97238f Handle StateFuncs in provider shim
Any state modifying functions can only be run once during the plan-apply
cycle. When regenerating the Diff during ApplyResourceChange, strip out
all StateFunc and CustomizeDiff functions from the schema.

Thew NewExtra diff field was where config data that was modified by a
StateFunc was stored, and needs to be maintained between plan and apply.

During PlanResourceChange, store any NewExtra data from the Diff in the
PlannedPrivate data, and re-insert the NewExtra data into the Diff
generated during ApplyResourceChange.
2018-12-03 18:12:02 -05:00
James Bardin 3dacdba678
Merge pull request #19521 from hashicorp/jbardin/prepare-provider-config
catch conversion errors in PrepareProviderConfig
2018-11-30 15:32:56 -05:00
James Bardin 5f9b189fcf catch conversion errors in PrepareProviderConfig
Errors were being ignore with the intention that they would be caught
later in validation, but it turns out we nee dto catch those earlier.

The legacy schemas also allowed providers to set and empty string for a
bool value, which we need to handle here, since it's not being handled
from user input like a normal config value.
2018-11-30 14:51:52 -05:00
Martin Atkins 72e279e6b2 providers: Consistently use int64 for schema versions
The rest of Terraform is still using uint64 for this in various spots, but
we'll update that gradually later. We use int64 here because that matches
what's used in our protobuf definition, and unsigned integers are not
portable across all of the protobuf target languages anyway.
2018-11-30 11:22:39 -08:00
James Bardin 6daf4989d4
Merge pull request #19475 from hashicorp/jbardin/computed-containers
Shim computed containers
2018-11-27 09:15:23 -05:00
James Bardin 6f4d86094f preserve possible zero values when normalizing
When normalizing flatmapped containers, compare the attributes to the
prior state and preserve pre-existing zero-length or unknown values. A
zero-length value that was previously unknown is preserved as a
zero-length value, as that may have been computed as such by the
provider.
2018-11-27 08:54:15 -05:00
Martin Atkins 58fa38b89a helper/schema: Update docs for PromoteSingle
This is no longer effective and should not be used in any new schema.
2018-11-26 17:11:34 -08:00
Martin Atkins 3d54af9c09 helper/schema: Better mimic some undocumented behaviors in Core schema
Since the SDK's schema system conflates attributes and nested blocks, it's
possible to state some nonsensical schema situations such as:

- A nested block is both optional but has MinItems > 0
- A nested block is entirely computed but has MinItems or MaxItems set

Both of these weird situations are handled here in the same way that the
existing helper/schema validation code would've handled them: by
effectively disabling the MinItems/MaxItems checks where they would've
been ignored before.

the MinItems/MaxItems
2018-11-26 17:11:34 -08:00
Martin Atkins 37da625ee9 helper/schema: Tell Core attribute is optional if set conditionally
The SDK has a mechanism that effectively makes it possible to declare an
attribute as being _conditionally_ required, which is not a concept that
Terraform Core is aware of.

Since this mechanism is in practice only used for a small UX improvement
in prompting for these values interactively when the environment variable
is not set, we avoid here introducing all of this complexity into the
plugin protocol by just having the provider selectively modify its schema
if it detects that such an attribute might be set dynamically.

This then prevents Terraform Core from validating the presence of the
argument or prompting for a new value for it, allowing the null value to
pass through into the provider so that the default value can be generated
again dynamically.

This is a kinda-kludgey solution which we're accepting here because the
alternative would be a much-more-complex two-pass decode operation within
Core itself, and that doesn't seem worth it.

This fixes #19139.
2018-11-26 17:11:34 -08:00
James Bardin f375691819 add missing key-value from test 2018-11-19 18:58:29 -05:00
Martin Atkins 4fe9632f09 plugin: Establish our current plugin protocol as version 5
The main significant change here is that the package name for the proto
definition is "tfplugin5", which is important because this name is part
of the wire protocol for references to types defined in our package.

Along with that, we also move the generated package into "internal" to
make it explicit that importing the generated Go package from elsewhere is
not the right approach for externally-implemented SDKs, which should
instead vendor the proto definition they are using and generate their
own stubs to ensure that the wire protocol is the only hard dependency
between Terraform Core and plugins.

After this is merged, any provider binaries built against our
helper/schema package will need to be rebuilt so that they use the new
"tfplugin5" package name instead of "proto".

In a future commit we will include more elaborate and organized
documentation on how an external codebase might make use of our RPC
interface definition to implement an SDK, but the primary concern here
is to ensure we have the right wire package name before release.
2018-11-19 09:56:41 -08:00
James Bardin e95f2b586e another test case in helper/plugin 2018-11-16 15:12:16 -05:00
James Bardin 3716db3865
Merge pull request #19384 from hashicorp/jbardin/nested-sets
New Attribute and Diff handling in shims
2018-11-16 11:55:41 -05:00
James Bardin 89b2c6f21e comment fixes 2018-11-16 11:24:14 -05:00
James Bardin 17ecda53b5 strip empty containers from flatmap attributes
In order to prevent mismatched states between read/plan/apply, we need
to ensure that the attributes are generated consistently each time.
Because of the various ways in which helper/schema and the hcl2 shims
interpret empty values, the only way to ensure consistency is to always
remove them altogether.
2018-11-16 09:59:03 -05:00
James Bardin 21dfa56766 use ShimInstanceStateFromValue in DiffFromValues
This makes sure the diff is generated with the matching set ids from
helper/schema.

Update the tests to add ID fields to the state, which will exists in
practice, since any state traversing through the shims will have the ID
inserted.
2018-11-16 09:59:03 -05:00
James Bardin 34766ca666 use the new InstanceState shim 2018-11-16 09:59:03 -05:00
James Bardin df04e2e7a6 move InstanceState shim into schema.Resource
This was the resource can rebuild the flatmapped state using the
schema and ResourceData, providing us the the correct set key values.
2018-11-16 09:59:03 -05:00
James Bardin b872491baa incremental progress towards applying diffs 2018-11-16 09:58:42 -05:00
James Bardin ce5d7ff6d0 spelling 2018-11-13 18:41:53 -05:00
Dana Hoffman 7edbb3c8bf return state even if cfg is invalid 2018-11-12 21:49:30 -05:00
Radek Simko 0cbf745e5a
helper/schema: Avoid erroring out on undefined timeouts 2018-11-07 15:38:58 +00:00
Radek Simko 7eae051a16
Merge pull request #19286 from hashicorp/radeksimko/b-timeouts-parsing-fix
helper/schema: Fix timeout parsing during Provider.Diff
2018-11-06 11:18:31 +00:00
Radek Simko 1cb8f1df80
helper/schema: Fix timeout parsing in ResourceTimeout.ConfigDecode 2018-11-05 12:42:12 +00:00
Radek Simko 82a77f9bb5
helper/schema: Add test for invalid timeout value 2018-11-05 12:42:12 +00:00
Radek Simko 2fe3f16cb3
helper/schema: Return error on invalid timeout type 2018-11-05 12:42:11 +00:00
Radek Simko 186a6dcc38
helper/schema: Add test for wrong timeout type 2018-11-05 12:42:11 +00:00
James Bardin ae1f93a24f
Merge pull request #19236 from hashicorp/jbardin/resource-tests
skip resource tests for now
2018-11-01 11:52:50 -04:00
James Bardin a5ef403dfd skip resource tests for now
These aren't going to be fixed in the immediate future, and are
preventing the CI tests from being helpful.
2018-10-31 14:17:23 -04:00
James Bardin 718a3c400a fix state variable name 2018-10-31 13:43:50 -04:00
James Bardin e0ea2a5d06 if there is no plan diff, prefer the prior state
The prior state may contain customizations made by the provider. If
there is no prior state, then take the proposed state.
2018-10-30 15:58:00 -04:00
James Bardin f153720a36 add checks for timeouts attributes and blocks
Don't overwrite anything the provider defined, in order to maintain
existing behavior.

Change strings to pre-defined constants
2018-10-30 14:16:44 -04:00
James Bardin e38a5a769d copy timouts into plan and apply state
helper/schema will remove "timeouts" from the config, and stash them in
the diff.Meta map. Terraform sees "timeouts" as a regular config block,
so needs them to be present in the state in order to not show a diff.

Have the GRPCProviderServer shim copy all timeout values into any state
it returns to provide consistent diffs in core.
2018-10-30 13:14:08 -04:00
James Bardin 6dad121e70 insert resource timeouts into the config schema
Resource timeouts were a separate config block, but did not exist in the
resource schema. Insert any defined timeouts when generating the
configshema.Block so that the fields can be accepted and validated by
core.
2018-10-30 13:14:08 -04:00
James Bardin dbaf347392
Merge pull request #19136 from hashicorp/jbardin/simple-diff
panic fixes
2018-10-19 17:06:37 -04:00
Brian Flad 62bf23850b
Merge pull request #19122 from hashicorp/f-helper-validation-Any
helper/validation: Add Any() SchemaValidateFunc
2018-10-19 15:11:33 -04:00
James Bardin d50a152f8b check for a nil diff in simpleDiff 2018-10-19 14:25:20 -04:00
Brian Flad 46804080aa
helper/validation: Add Any() SchemaValidateFunc
`Any()` allows any single passing validation of multiple `SchemaValidateFunc` to pass validation to cover cases where a standard validation function does not cover the functionality or to make error messaging simpler.

Example provider usage:

```go
ValidateFunc: validation.Any(
  validation.IntAtLeast(42),
  validation.IntAtMost(5),
),
```
2018-10-18 20:58:53 -04:00
James Bardin ff4e81cc2b add old values when computing the new InstanceDiff
This was previously done in the RequiresNew code, which is skipped in
new style provider.
2018-10-18 20:05:33 -04:00
James Bardin a8f75bc554 don't set defaults for deprecated or removed
These may still have defaults set, even if they are not intended to be
used.
2018-10-18 12:45:55 -04:00
James Bardin e077c9ce95 Insert default values into provider config
Add any top-level default attributes from the provider schema into Null
config values.
2018-10-18 11:40:47 -04:00
James Bardin a3ac49b3fb GRPCProviderServer and PrepareProviderconfig
Update the server side of the plugin to match the new method signature.
2018-10-18 08:48:55 -04:00
Sander van Harmelen 48ef7ecfa6 Updates after running `make fmt` with Go v1.11.1 2018-10-17 14:11:08 -07:00
Brian Flad 17ac9a5756
helper/validation: Add All() and IntInSlice() SchemaValidateFunc
`All()` combines the outputs of multiple `SchemaValidateFunc`, to reduce the usage of custom validation functions that implement standard validation functions.

Example provider usage:

```go
ValidateFunc: validation.All(
  StringLenBetween(5, 42),
  StringMatch(regexp.MustCompile(`[a-zA-Z0-9]+`), "value must be alphanumeric"),
),
```

`IntInSlice()` is the `int` equivalent of `StringInSlice()`

Example provider usage:

```go
ValidateFunc: validation.IntInSlice([]int{30, 60, 120})
```

Output from unit testing:

```
$ make test TEST=./helper/validation
==> Checking that code complies with gofmt requirements...
go generate ./...
2018/10/17 14:16:03 Generated command/internal_plugin_list.go
go list ./helper/validation | xargs -t -n4 go test  -timeout=2m -parallel=4
go test -timeout=2m -parallel=4 github.com/hashicorp/terraform/helper/validation
ok  	github.com/hashicorp/terraform/helper/validation	1.106s
```
2018-10-17 14:22:29 -04:00
James Bardin 1ab96f42b7 fail nonfunctional resource tests
The helper/resource unit tests will panic, because they were using the
legacy terraform.MockResourceProvider, which doesn't have the same
internals required by the new GRPC shims.

Fail these tests for now, and a new test provider will need to be made
out of a schema.Provider instance.
2018-10-17 12:51:07 -04:00
James Bardin 38163f2b37 use SimpleDiff and set "id" as RequiresReplace
Use the new SimpleDiff method of the provider so that the diff isn't
altered by ForceNew attributes.

Always set an "id" as RequiresReplace so core knows an instance will be
replaced, even if all ForceNew attributes are filtered out due to
ignore_changes.
2018-10-16 19:14:54 -07:00
James Bardin 46b4c27dbe create a SimpleDiff for the new provider shims
Terraform now handles any actual "diffing" of resource, and the existing
Diff functions are only used to shim the schema.Provider to the new
methods. Since terraform is handling what used to be the Diff, the
provider now should not modify the diff based on RequiresNew due to it
interfering with the ignore_changes handling.
2018-10-16 19:14:11 -07:00
James Bardin 0d4d572c39 start work on helper/resource test fixtures
The helper resource tests won't pass for now, as they use a
terraform.MockProvider which can't be used in the schema.Provider shims.
2018-10-16 19:14:11 -07:00
James Bardin f8b1a3c7a4 make sure apply can properly destroy
We need to ensure that a destroyed value is returned as such from apply
2018-10-16 19:14:11 -07:00
James Bardin 52c0032aed update provisioners for multiple processes
The "internal" provisioners are still run in a separate process, and
need to be updated to restart on each walk.
2018-10-16 19:14:11 -07:00
James Bardin caf74a218d initialize empty diff in apply
While the schema Diff fucntion returns a nil diff when creating an empty
(except for id) resource, the Apply function expects the diff to be
initialized and ampty.
2018-10-16 19:14:11 -07:00
James Bardin 0b8c38207a a plan with no diff should return proposed state
PlanResourceChange isn't returning the diff, but rather it is returning
the destired state. If the propsed state results in a nil diff, then,
the propsed state is what should be returned.

Make sure Meta fields are not nil, as the schema package expects those
to be initialised.
2018-10-16 19:14:11 -07:00
Radek Simko d93b462e9c helper/plugin: don't panic in ReadDataSource State 2018-10-16 19:14:11 -07:00
Martin Atkins 1908aff476 helper/resource: Fix duplicated function testConfig
An earlier change introduced a new function testConfig to the main code
for this package, which conflicted with a function of the same name in
the test code.

Here we rename the function from the test code, allowing for the more
generally-named testConfig to be the one in the main code.
2018-10-16 19:14:11 -07:00
Radek Simko 2de0903538 Fix data source bug 2018-10-16 19:14:11 -07:00
Martin Atkins 33151f5011 core: Move StateValueFromInstanceState shim from helper/schema
This one doesn't depend on any helper/schema specific bits and it'll also
be useful for the shims in our mock provider in core.
2018-10-16 19:14:11 -07:00
Martin Atkins 76d11f44cc core: Move some of the helper/schema shims so provider mock can use them
The old names are now wrappers around these new functions.
2018-10-16 19:14:11 -07:00
James Bardin a87470cc15 resource ids must always have a value
The "id" field is assumed to always exist, and must have a valid value.
Set "id" to unknown when planning new resource changes to indicate that
it will be computed.
2018-10-16 19:14:11 -07:00
Martin Atkins 97da905c6e helper/plugin: ReadResource to deal with missing remote object 2018-10-16 19:14:11 -07:00
Martin Atkins a7342de274 core: Properly handle no-op changes in plan
Previously we just left these out of the plan altogether, but in the new
plan types we intentionally include change information for every resource
instance, even if no changes are actually planned, to allow alternative
plan file viewers to show what isn't changing as well as what is.
2018-10-16 19:14:11 -07:00
Martin Atkins c27f900d92 helper/plugin: Don't panic while preparing response in ApplyResourceChange 2018-10-16 19:14:11 -07:00
Martin Atkins 686018ae12 helper/plugin: don't panic in PlanResourceChange PlannedState 2018-10-16 19:14:11 -07:00
Martin Atkins 44bc7519a6 terraform: More wiring in of new provider types
This doesn't actually work yet, but it builds and then panics in a pretty
satisfying way.
2018-10-16 19:12:54 -07:00
James Bardin c07ce1cd4b move conversion functions into separate package
Managing which function need to be shared between the terraform plugin
and the helper plugin without creating cycles was becoming difficult.
Move all functions related to converting between terraform and proto
type into plugin/convert.
2018-10-16 19:11:09 -07:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
James Bardin 7188d5cbfe add grpc shims to helper/plugin
Add shim functions to automatically wrap plugins in the new GRPC
implementations.
2018-10-16 18:58:49 -07:00
James Bardin 63dcdbe948 helper/plugin package for grpc servers
The new helper/plugin package contains the grpc servers for handling the
new plugin protocol

The GRPCProviderServer and GRPCProvisionerServer handle the grpc plugin
protocol, and convert the requests to the legacy schema.Provider and
schema.Provisioner methods.
2018-10-16 18:58:49 -07:00
James Bardin b88410984b legacy provider needs to handle StateUpgraders
In order to not require state migrations to be supported in both
MigrateState and StateUpgraders, the legacy provider codepath needs to
handle the StateUpgraders transparently during Refresh.
2018-10-16 18:56:50 -07:00
James Bardin dcaf5aa262 add some of the shims used for the grpc provider
This adds some of the required shim functions to the schema package.
While this further bloats the already huge package, adding the helpers
here was significantly less disruptive than refactoring types into
separate packages to prevent import cycles.

The majority of tests here are directly adapted from existing schema
tests to provide as many known good values to the shims as possible.
2018-10-16 18:56:50 -07:00
James Bardin 7d24936507 updates to teh StateUpgraders
Fix documentation.
Require StateUpgraders to be add in order, and test in validation.
2018-10-16 18:53:51 -07:00
James Bardin 0c33b26e04 StateUpgrade redux
It turns out that state upgrades need to be handled differently since
providers are going to be backwards compatible. This means that new
state upgrades may still be stored in the flatmap format when used wih
terraform 0.11. Because we can't account for the specific version which
could produce a legacy state, all future state upgrades need to record
the schema types for decoding.

Rather than defining a single Upgrade function for states, we now have a
list of functions, each of which handle upgrading a specific version to
the next. In practice this isn't much different from the way many
resources implement upgrades themselves, with a separate function for
each version dispatched from the MigrateState function. The only added
burden is the recording of the schema type, and we intend to supply
tools and helper function to prevent the need to copy the entire
existing schema in all cases.
2018-10-16 18:53:51 -07:00
James Bardin 9eef5e3f91 implement UpgradeState for schema.Resource
This is the provider-side UpgradeState implementation for a particular
resource. This new function will be called to upgrade a saved state with
an old schema version to the current schema.

UpgradeState also requires a record of the last schema and version that
could have been stored as a flatmapped state. If the stored state is in
the legacy flatmap format, this will allow the provider to properly
decode the flatmapped state into the expected structure for the new json
encoded state. If the stored state's version is below that of the
LegacySchema.Version value, it will first be processed by the legacy
MigrateState function.
2018-10-16 18:53:51 -07:00
James Bardin bcc8be7400 add schema.InternalMap
This exposes the internal schemaMap for use by the new provider shims.
2018-10-16 18:53:51 -07:00
James Bardin 0120d53baf only add "id" to top-level resources
Make sure we only add "id" to the top-level resource, since Resource is
also used for nested blocks.
2018-10-16 18:53:51 -07:00
James Bardin 15ccf2dda5 use a custom comparer for cty.Type
Make sure we also compare cty.Types in `cmp.Equal`, even though they
contain unexported fields.
2018-10-16 18:50:57 -07:00
James Bardin 3112b707be SetId should set the attribute as well
The update protocol shims will also check for this this, but eventually
"id" will only be a normal attribute, and we shouldn't have to special
case this.
2018-10-16 18:50:57 -07:00
James Bardin befa81c74f add implicit "id" to resource attribute schemas
When converting a legacy schemaMap to a configschema, we need to add
"id" as a required attribute to top-level resources if it's not
declared.

The "id" field will be required to interoperate with the legacy helper
schema, since the presence of an id was used to indicate the existence
of a resource.
2018-10-16 18:50:57 -07:00
Martin Atkins 479c6b2466 move "configschema" from "config" to "configs"
The "config" package is no longer used and will be removed as part
of the 0.12 release cleanup. Since configschema is part of the
"new world" of configuration modelling, it makes more sense for
it to live as a subdirectory of the newer "configs" package.
2018-10-16 18:50:29 -07:00
Martin Atkins 3c10a3b213 helper/schema: Tolerate incorrectly-specified collection elems
We historically tolerated this, so we need to tolerate it here too in
order to work correctly with existing provider code.
2018-10-16 18:49:20 -07:00
Martin Atkins c937c06a03 terraform: ugly huge change to weave in new HCL2-oriented types
Due to how deeply the configuration types go into Terraform Core, there
isn't a great way to switch out to HCL2 gradually. As a consequence, this
huge commit gets us from the old state to a _compilable_ new state, but
does not yet attempt to fix any tests and has a number of known missing
parts and bugs. We will continue to iterate on this in forthcoming
commits, heading back towards passing tests and making Terraform
fully-functional again.

The three main goals here are:
- Use the configuration models from the "configs" package instead of the
  older models in the "config" package, which is now deprecated and
  preserved only to help us write our migration tool.
- Do expression inspection and evaluation using the functionality of the
  new "lang" package, instead of the Interpolator type and related
  functionality in the main "terraform" package.
- Represent addresses of various objects using types in the addrs package,
  rather than hand-constructed strings. This is not critical to support
  the above, but was a big help during the implementation of these other
  points since it made it much more explicit what kind of address is
  expected in each context.

Since our new packages are built to accommodate some future planned
features that are not yet implemented (e.g. the "for_each" argument on
resources, "count"/"for_each" on modules), and since there's still a fair
amount of functionality still using old-style APIs, there is a moderate
amount of shimming here to connect new assumptions with old, hopefully in
a way that makes it easier to find and eliminate these shims later.

I apologize in advance to the person who inevitably just found this huge
commit while spelunking through the commit history.
2018-10-16 18:46:46 -07:00
Martin Atkins 5782357c28 backend: Update interface and implementations for new config loader
The new config loader requires some steps to happen in a different
order, particularly in regard to knowing the schema in order to
decode the configuration.

Here we lean directly on the configschema package, rather than
on helper/schema.Backend as before, because it's generally
sufficient for our needs here and this prepares us for the
helper/schema package later moving out into its own repository
to seed a "plugin SDK".
2018-10-16 18:39:12 -07:00
Martin Atkins 1fb714ea3b helper/schema: CoreConfigSchema method for Backend
This is just like the method of the same name on Resource, adapting the
helper/schema model of schema into Terraform Core's idea of schema.
2018-10-16 18:24:47 -07:00
Martin Atkins d6c6f8852c configschema: include description in schema
We will need access to this information in order to render interactive
input prompts, and it will also be useful in returning schema information
to external tools such as text editors that have autocomplete-like
functionality.
2018-10-16 18:24:47 -07:00
Paddy 35d82b0555
Merge pull request #18795 from hashicorp/paddy_diff_nested_checkKey
Allow for nested fields with checkKey on ResourceDiffs.
2018-09-26 14:21:28 -07:00
Paddy Carver 2eadc8f625 Don't allow sub-blocks for SetNew.
You can't set individual items in lists, you can only set the list as a
whole, so we shouldn't allow sub-blocks to SetNew or SetNewComputed.
2018-09-26 12:38:38 -07:00
Paddy Carver 393c32624a Add tests to ensure clearing sub-blocks works. 2018-09-20 10:52:36 -07:00
Paul Hinze 470ab3869f
helper/pathorcontents: Skip one test when root
One of the tests in this package doesn't work when the tests are run as
root - like inside of a Docker container. The test is still useful to
specify `pathorcontents` behavior when a file is not readable, so it's
better to skip than just delete it. See linked issue for further
disussion.

Closes #7707
2018-09-19 11:38:51 -05:00
Kristin Laemmert 813b5fd27f
Merge pull request #18825 from sean-/master-make-dev-drift
build: Updates required to bump golang version to 1.11
2018-09-17 09:00:04 -07:00
Brian Flad a47583d3a8
Merge pull request #18688 from hashicorp/f-resource-paralleltest
helper/resource: Add ParallelTest() function to allow opt-in acceptance testing concurrency with t.Parallel()
2018-09-13 11:25:28 -04:00
Sean Chittenden d749420a25
Fix drift caused from gofmt when running make dev and go 1.11.
A fresh checkout of `origin/master` does not build atm using the `dev`
target because `master` has not been formatted using `gofmt` from Go
1.11 (tis has been the case for a while if you've been running devel).

None of the drift in question is especially new but now that Go 1.11
has been released and gofmt's formatting guidelines have been updated,
it would be *really* nice if the code in `master` reflected the current
tooling in order to avoid having to fight this drift locally.

* 8mo: https://github.com/hashicorp/terraform/blame/master/backend/remote-state/s3/backend_test.go#L260-L261
* 6mo: https://github.com/hashicorp/terraform/blame/master/builtin/provisioners/chef/linux_provisioner_test.go#L124
* 1yr: 7cfeffe36b/command/init.go (L75-L76)
* 12d: 7cfeffe36b/command/meta_backend_test.go (L1437)
* 2yr: 7cfeffe36b/helper/schema/resource_timeout_test.go (L26)
* 4yr: 7cfeffe36b/helper/schema/schema_test.go (L2059)
* 1yr: 7cfeffe36b/plugin/discovery/get_test.go (L151)
2018-09-09 10:18:08 -07:00
Paddy Carver 7ee4339555 Allow for nested fields with checkKey on ResourceDiffs.
When checking if a ResourceDiff key is valid, allow for keys that exist
on sub-blocks. This allows things like diff.Clear to be called on
sub-block fields, instead of just on top-level fields.
2018-09-05 17:29:03 -07:00
Sander van Harmelen 3e935c846f terraform/terraform_remote_state: accept complex configs
The `remote` backend config contains an attribute that is defined as a `*schema.Set`, but currently only `string` values are accepted as the `config` attribute is defined as a `schema.TypeMap`.

Additionally the `b.Validate()` method wasn’t called to prevent a possible panic in case of unexpected configurations being passed to `b.Configure()`.

This commit is a bit of a hack to be able to support this in the 0.11 series. The 0.12 series will have proper support, so when merging 0.12 this should be reverted again.
2018-08-29 20:21:47 +02:00
Paul Tyng 74eae6825a
Fix typo in comment 2018-08-16 16:29:29 -04:00
Brian Flad 798162125b helper/resource: Add ParallelTest() function to allow opt-in acceptance testing concurrency with t.Parallel()
While this initial implementation is a very simple wrapper function, implementing this in the helper/resource package provides some downstream benefits:
* Provides a standard interface for plugin developers to enable parallel acceptance testing
* Existing plugins can simply convert resource.Test to resource.ParallelTest references (as appropriate) to enable the functionality, rather than worrying about additional line(s) to each acceptance test function or TestCase
* Potential enhancements to ParallelTest (e.g. adding an environment variable to skip enabling the behavior) are consistently propagated
2018-08-15 15:00:27 -04:00
Dana Hoffman 40225061b4 pretty-print json in http requests/responses 2018-08-09 12:27:58 -07:00
craigatgoogle 7df15ad98a Added FloatBetween validation func
Added lower bound inclusion test for FloatBetween
2018-08-06 16:32:39 -07:00
Chris Marchesi 67182d06d7
Merge pull request #18125 from hashicorp/f-testing-taint
helper/resource: Add ability to pre-taint resources
2018-08-01 09:31:07 -07:00