Commit Graph

32 Commits

Author SHA1 Message Date
Alisdair McDiarmid 9204498fe5 configs/configload: Remove unused SourceAddr funcs
isLocalSourceAddr and isRegistrySourceAddr are also present in
internal/initwd/getter.go, and they are unused in this package.
2020-06-10 16:26:04 -04:00
Pam Selle f82700bc56
Disallow provider configuration in expanding modules (#24892)
Validate providers in expanding modules. Expanding modules cannot have provider configurations with non-empty configs, which includes having a version configured. If an empty or alias-only block is passed, the provider must be passed through the providers argument on the module call
2020-05-08 11:35:28 -04:00
Martin Atkins 2b2ac1f6de configs: use local set of go-getter detectors
In an earlier change we switched to defining our own sets of detectors,
getters, etc for go-getter in order to insulate us from upstream changes
to those sets that might otherwise change the user-visible behavior of
Terraform's module installer.

However, we apparently neglected to actually refer to our local set of
detectors, and continued to refer to the upstream set. Here we catch up
with the latest detectors from upstream (taken from the version of
go-getter we currently have vendored) and start using that fixed set.

Currently we are maintaining these custom go-getter sets in two places
due to the configload vs. initwd distinction. That was already true for
goGetterGetters and goGetterDecompressors, and so I've preserved that for
now just to keep this change relatively simple; in later change it would
be nice to factor these "get with go getter" functions out into a shared
location which we can call from both configload and initwd.
2020-01-07 09:38:46 -08:00
Pam Selle cca36025d6
Merge pull request #22946 from hashicorp/kmoe/copy_dir_dotfiles
remove dotfile exclusion in copyDir
2019-10-24 12:01:42 -04:00
Radek Simko 32f9722d9d
Replace import paths & set UA string where necessary 2019-10-11 22:40:54 +01:00
Martin Atkins 39e609d5fd vendor: switch to HCL 2.0 in the HCL repository
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.

This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.

For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
2019-10-02 15:10:21 -07:00
Katy Moe 2c44a7aacb
remove dotfile exclusion in copyDir
copyDir is used in configload/getter.go to copy previously downloaded modules instead of using the go-getter client every time. The go-getter client downloads dotfiles, but copyDir did not copy dotfiles, leading to inconsistent behaviour when reusing the same module source.
2019-09-30 13:11:57 +01:00
Radek Simko 5b9f2fafc8 Standardise directory name for test data 2019-06-30 10:16:15 +02:00
Pam Selle 59c5cc4788
Merge pull request #21254 from davewongillies/gcs
Add GCS source support for modules
2019-06-13 10:24:38 -04:00
Martin Atkins e85093ce08 configs/configload: Don't panic when version constraint is added
Previously, adding a version constraint to a module that was previously
recorded without a version in the module manifest would cause a panic.

Instead, we now use a slight variant of the "dependencies have changed"
error that doesn't try to print out a specific version number.
2019-06-03 09:45:30 -07:00
David Gillies 8b45443b21
Add GCS source support for modules 2019-05-21 12:18:49 -07:00
Kristin Laemmert 0c5fd835ce
copyDir: detect if the module install path is a symlink to a directory (#20603)
configs/configload and internal/initwd both had a copyDir function that
would fail if the source directory contained a symlinked directory,
because the os.FileMode.IsDir() returns false for symlinks.

This PR adds a check for a symlink and copies that symlink in the
target directory. It handles symlinks for both files and directories
(with included tests).

Fixes #20539
2019-03-07 12:59:48 -08:00
Martin Atkins 86c02d5c35 command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.

This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.

In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.

Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.

The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
  configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
  excludes Terraform versions prior to v0.12 then the configuration is
  probably _already_ upgraded and so it's just a normal syntax error,
  even if the early loader didn't detect it.

Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 11:33:21 -08:00
Martin Atkins 0c0a437bcb Move module install functionality over to internal/initwd 2019-01-14 11:33:21 -08:00
Martin Atkins 0ce2add59f internal/modsdir: Factor out module manifest models to separate package 2019-01-14 11:33:21 -08:00
Martin Atkins f001cb8654 command: Fix terraform init -from-module with relative paths
Since our new approach here works by installing with a synthetic module
configuration block, we need to treat relative paths as a special case
for two reasons:

- Relative paths in module addresses are relative to the file containing
  the call rather than the working directory, but -from-module uses the
  working directory (and the call is in a synthetic "file" anyway)

- We need to force Terraform to pass the path through to go-getter rather
  than just treating it as a relative reference, since we really do want
  a copy of the directory in this case, even if it is local.

To address both of these things, we'll detect a relative path and turn it
into an absolute path before beginning installation. This is a bit hacky,
but this is consistent with the general philosophy of the -from-module
implementation where it does hacky things so that the rest of the
installer code can be spared of dealing with its special cases.

This is covered by a couple of existing tests that run init -from-module,
including TestInit_fromModule_dstInSrc which now passes.
2018-11-09 09:48:03 -08:00
Martin Atkins 741d334ee4 command: Even more fixes for "apply" command tests 2018-10-16 19:14:11 -07:00
Martin Atkins 7d0be84300 configload: Don't fail if one module is a child directory of another
Given a module foo and a module foo/bar, the previous code might
incorrectly treat "bar" as a file within "foo" rather than as a module
directory in its own right.
2018-10-16 19:14:11 -07:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
Kristin Laemmert d1f27ce8c2 registry: renaming module-specific registry functions 2018-10-16 18:56:50 -07:00
Martin Atkins fc0e28b2b4 configload: Don't download the same module source multiple times
It is common for the same module source package to be referenced multiple
times in the same configuration, either because there are literally
multiple instances of the same module source or because a single package
(or repository) contains multiple modules in sub-directories and many
of them are referenced.

To optimize this, here we introduce a simple caching behavior where the
module installer will detect if it's asked to install multiple times from
the same source and produce the second and subsequent directories by
copying the first, rather than by downloading again over the network.

This optimization is applied once all of the go-getter detection has
completed and sub-directory portions have been trimmed, so it is also
able to normalize differently-specified source addresses that all
ultimately detect to the same resolved address. When installing, we
always extract the entire specified package (or repository) and then
reference the specified sub-directory, so we can safely re-use existing
directories when the base package is the same, even if the sub-directory
is different.

However, as a result we do not yet address the fact that the same package
will be stored multiple times _on disk_, which may still be problematic
when referencing large repositories multiple times in
disk-storage-constrained environments. We could address this in a
subsequent change by investigating the use of symlinks where possible.

Since the Registry installer is implemented just as an extra resolution
step in front of go-getter, this optimization applies to registry
modules too. This does not apply to local relative references, which will
continue to just resolve into the already-prepared directory of their
parent module.

The cache of previously installed paths lives only for the duration of
one call to InstallModules, so we will never re-use directories that
were created by previous runs of "terraform init" and there is no risk
that older versions will pollute the cache when attempting an upgrade
from a source address that doesn't explicitly specify a version.

No additional tests are added here because the existing module installer
tests (when TF_ACC=1) already cover the case of installing multiple
modules from the same source.
2018-10-16 18:50:29 -07:00
Martin Atkins eb7aaf2414 configload: Configuration snapshots
Here we introduce a new idea of a "configuration snapshot", which is an
in-memory copy of the source code of each of the files that make up
the configuration. The primary intended purpose for this is as an
intermediate step before writing the configuration files into a plan file,
and then reading them out when that plan file is later applied.

During earlier configs package development we expected to use an afero vfs
implementation to read directly from the zip file, but that doesn't work
in practice because we need to preserve module paths from the source file
system that might include parent directory traversals (../) while
retaining the original path for use in error messages.

The result, for now, is a bit of an abstraction inversion: we implement
a specialized afero vfs implementation that makes the sparse filesystem
representation from a snapshot appear like a normal filesystem just well
enough that the config loader and parser can work with it.

In future we may wish to rework the internals here so that the main
abstraction is at a similar level to the snapshot and then that API is
mapped to the native filesystem in the normal case, removing afero. For
now though, this approach avoids the need for a significant redesign
of the parser/loader internals, at the expense of some trickiness in the
case where we're reading from a snapshot.

This commit does not yet include the reading and writing of snapshots into
plan files. That will follow in a subsequent commit.
2018-10-16 18:50:29 -07:00
Martin Atkins fa2a76fa23 configs: use addrs.Module for module path, rather than []string
addrs.Module is itself internally just []string, but this better
communicates our intent here and makes this integrate better with other
code which is using this type for this purposes.
2018-10-16 18:46:46 -07:00
Martin Atkins 591aaf1e6a configload: helper functions for tests
These utility functions are intended to allow concisely loading a
configuration from a fixture directory in a test, bailing out early if
there are any unexpected errors.
2018-10-16 18:24:47 -07:00
Martin Atkins 6cf9346dfd configs/configload: Helper for recognizing a config dir (or not)
This is just a small wrapper around the parser's IsConfigDir method, for
convenience and for law of demeter.
2018-10-16 18:24:47 -07:00
Sander van Harmelen 179b32d426 Add a `CredentialsForHost` method to disco.Disco
By adding this method you now only have to pass a `*disco.Disco` object around in order to do discovery and use any configured credentials for the discovered hosts.

Of course you can also still pass around both a `*disco.Disco` and a `auth.CredentialsSource` object if there is a need or a reason for that!
2018-08-03 11:29:11 +02:00
Martin Atkins ea868026b8 configs/configload: installer tests inspect their result
Previously we were just loading the module and asserting no diagnostics,
but that is not really good enough since if we install modules incorrectly
it's possible that we are still able to load an empty configuration
successfully.

Now we'll do some basic inspecetion of the module tree that results from
loading what we installed, to ensure that all of the expected modules
are present at the right locations in the tree.
2018-02-15 15:56:39 -08:00
Martin Atkins d859bacbdd configs/configload: InitDirFromModule
This will provide the functionality of "terraform init -from-module=...",
which uses the contents of a given module to populate the working
directory.

This mechanism is intended for installing e.g. examples from Terraform
Registry or elsewhere. It's not fully-general since it can't reasonably
install a module from a subdir that refers up to a parent directory, but
that isn't an issue for all reasonable uses of this option.
2018-02-15 15:56:39 -08:00
Martin Atkins 74afcb4a7f configs/configload: some loaders can't install modules
Originally the hope was to use the afero filesystem abstraction for all
loader operations, but since we install modules using go-getter we cannot
(without a lot of refactoring) support vfs for installation.

The vfs use-case is for reading configuration from plan zip files anyway,
and so we have no real reason to support installation into a vfs. For now
at least we will just add the possibility that a loader might not be
install-capable. At the moment we have no non-install-capable loaders, but
we'll add one later once we get to loading configuration from plan files.
2018-02-15 15:56:39 -08:00
Martin Atkins 59939cf320 configs/configload: installation from registry and go-getter
Unlike the old installer in config/module, this uses new-style
installation directories that include the static module path so that paths
we show in diagnostics will be more meaningful to the user.

As before, we retrieve the entire "package" associated with the given
source string, rather than any given subdirectory directly, because the
retrieved module may contain ../ references into parent directories which
must be resolvable after extraction.
2018-02-15 15:56:39 -08:00
Martin Atkins 7feef98517 configs/configload: installation of local modules
Enough of the InstallModules method to install local modules (those with
relative paths). "Install" is actually a bit of an exaggeration for these
since we actually just record them in our manifest after verifying that
the source directory exists.

This is a change of behavior relative to the old module installer since
we no longer create a symlink to the module directory inside the
.terraform/modules directory. Instead, we record the module's true
location in our manifest so that the loader will find it later.

The use of a symlink here predated the manifest file. Now that we have a
manifest file the symlinks are redundant. Using the "natural" location of
the module leads to more helpful error messages, since we'll refer to
the module path as the user expects it, rather than to an internal alias.
2018-02-15 15:56:38 -08:00
Martin Atkins 72ad927c4d configs/configload: package for loading configurations
Previously the behavior for loading and installing modules was included in
the same package as the representation of the module tree (in the
config/module package).

In our new world, the model of a module tree (now called a "Config") is
included in "configs" along with the Module and File structs. This new
package replaces the loading and installation functionality previously
in config/module with new equivalents that work with the model objects
in "configs".

As of this commit, only the loading functionality is implemented. The
installation functionality will follow in subsequent commits.
2018-02-15 15:56:38 -08:00