Commit Graph

43 Commits

Author SHA1 Message Date
James Bardin c814f2da37 Change backend.ValidateConfig to PrepareConfig
This mirrors the change made for providers, so that default values can
be inserted into the config by the backend implementation. This is only
the interface and method name changes, it does not yet add any default
values.
2019-02-25 18:37:20 -05:00
James Bardin 6cc3e1d0bd move init error to where it is generated
The init error was output deep in the backend by detecting a
special ResourceProviderError and formatted directly to the CLI.

Create some Diagnostics closer to where the problem is detected, and
passed that back through the normal diagnostic flow. While the output
isn't as nice yet, this restores the helpful error message and makes the
code easier to maintain. Better formatting can be handled later.
2019-02-20 14:18:37 -05:00
Sander van Harmelen a17f317025 Change how to fall back from remote to local backend
In order to support free organizations, we need a way to load the `remote` backend and then, depending on the used offering/plan, enable or disable remote operations.

In other words, we should be able to dynamically fall back to the `local` backend if needed, after first configuring the `remote` backend.

To make this works we need to change the way this was done previously when the env var `TF_FORCE_LOCAL_BACKEND` was set. The clear difference of course being that the env var would be available on startup, while the used offering/plan is only known after being able to connect to TFE.
2018-11-20 22:25:52 +01:00
Martin Atkins 27abd9c6b8 command: Fix TestMetaBackend_localDoesNotDeleteLocal
The changes to how we handle setting the state path on the local backend
broke the heuristic we were using here for detecting migration from one
local backend to another with the same state path, which would by default
end up deleting the state altogether after migration.

We now use the StatePaths method to do this, which takes into account
both the default values and any settings that have been set.

Additionally this addresses a flaw in the old method which could
potentially have deleted all non-default workspace state files if the
"path" setting were changed without also changing the "workspace_dir"
setting. This new approach is conservative because it will preserve all
of the files if any one overlaps.
2018-11-19 09:02:35 -08:00
Martin Atkins ec27526cc3 command: Fix TestMetaBackend_configuredChangeCopy_multiToMulti
This was failing because we now handle the settings for the local backend
a little differently as a result of decoding it with the HCL2 machinery.

Specifically, the backend.State* fields are now assumed to be what is
given in configuration, and any CLI overrides are maintained separately
in OverrideState* fields so that they can be imposed "just in time" in
StatePaths.

This is particularly important because OverrideStatePath (when set) is
used regardless of workspace name, while StatePath is a suitable value
only for the "default" workspace, with others needing to be constructed
from StateWorkspaceDir instead.
2018-11-19 09:02:35 -08:00
Sander van Harmelen 52a1b22f7a Implement the remote enhanced backend
This is a refactored version of the `remote` backend that was initially added to Terraform v0.11.8 which should now be compatible with v0.12.0.
2018-11-06 16:29:46 +01:00
Martin Atkins 98bbd560b5 command: Fix most (but not all) "terraform plan" tests 2018-10-16 19:14:11 -07:00
Martin Atkins cbc548eb36 command: Do CLI init of backend loaded from plan
If we don't do this, we can't produce any output when applying a saved
plan file.

Here we also introduce a check to the local backend's ReportResult
function so that it won't panic if CLI init is skipped, although that
will no longer happen in the apply-from-file case due to the change
described in the previous paragraph.
2018-10-16 19:14:11 -07:00
Kristin Laemmert 2808df48ec backend/local WIP commit - fixing tests 2018-10-16 19:14:11 -07:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
Martin Atkins 479c6b2466 move "configschema" from "config" to "configs"
The "config" package is no longer used and will be removed as part
of the 0.12 release cleanup. Since configschema is part of the
"new world" of configuration modelling, it makes more sense for
it to live as a subdirectory of the newer "configs" package.
2018-10-16 18:50:29 -07:00
Martin Atkins 5782357c28 backend: Update interface and implementations for new config loader
The new config loader requires some steps to happen in a different
order, particularly in regard to knowing the schema in order to
decode the configuration.

Here we lean directly on the configschema package, rather than
on helper/schema.Backend as before, because it's generally
sufficient for our needs here and this prepares us for the
helper/schema package later moving out into its own repository
to seed a "plugin SDK".
2018-10-16 18:39:12 -07:00
Sander van Harmelen d78470ad5a Don’t ask questions when -auto-approve is set
We previously asked to override a soft-failed policy, even wehn -auto-approve was set. That is now fixed by returning a policy failed error.
2018-10-09 20:12:33 +02:00
Sander van Harmelen 495d1ea350 Use New() instead of `once.Do(b.init)` 2018-08-03 11:29:11 +02:00
James Bardin e9a76808df create clistate.Locker interface
Simplify the use of clistate.Lock by creating a clistate.Locker
instance, which stores the context of locking a state, to allow unlock
to be called without knowledge of how the state was locked.

This alows the backend code to bring the needed UI methods to the point
where the state is locked, and still unlock the state from an outer
scope.

Provide a NoopLocker as well, so that callers can always call Unlock
without verifying the status of the lock.

Add the StateLocker field to the backend.Operation, so that the state
lock can be carried between the different function scopes of the backend
code. This will allow the backend context to lock the state before it's
read, while allowing the different operations to unlock the state when
they complete.
2018-02-23 16:48:15 -05:00
James Bardin ef8ed1e275 coalesce the backened interrupt code
Moves the nested select statements for backend operations into a single
function. The only difference in this part was that apply called
PersistState, which should be harmless regardless of the type of
operation being run.
2018-02-12 11:56:54 -05:00
James Bardin 7cba68326a always wait for a RunningOperation to return
If the user wishes to interrupt the running operation, only the first
interrupt was communicated to the operation by canceling the provided
context. A second interrupt would start the shutdown process, but not
communicate this to the running operation. This order of event could
cause partial writes of state.

What would happen is that once the command returns, the plugin system
would stop the provider processes. Once the provider processes dies, all
pending Eval operations would return return with an error, and quickly
cause the operation to complete. Since the backend code didn't know that
the process was shutting down imminently, it would continue by
attempting to write out the last known state. Under the right
conditions, the process would exit part way through the writing of the
state file.

Add Stop and Cancel CancelFuncs to the RunningOperation, to allow it to
easily differentiate between the two signals. The backend will then be
able to detect a shutdown and abort more gracefully.

In order to ensure that the backend is not in the process of writing the
state out, the command will always attempt to wait for the process to
complete after cancellation.
2018-02-12 11:56:03 -05:00
Martin Atkins 671aace8ec backend/local: disable local backup of remote state
Previously we forced all remote state backends to be wrapped in a
BackupState wrapper that generates a local "terraform.tfstate.backup"
file before updating the remote state.

This backup mechanism was motivated by allowing users to recover a
previous state if user error caused an undesirable change such as loss
of the record of one or more resources. However, it also has the downside
of flushing a possibly-sensitive state to local disk in a location where
users may not realize its purpose and accidentally check it into version
control. Those using remote state would generally prefer that state never
be flushed to local disk at all.

The use-case of recovering older states can be dealt with for remote
backends by selecting a backend that has preservation of older versions
as a first-class feature, such as S3 versioning or Terraform Enterprise's
first-class historical state versioning mechanism.

There remains still one case where state can be flushed to local disk: if
a write to the remote backend fails during "terraform apply" then we will
still create the "errored.tfstate" file to allow the user to recover. This
seems like a reasonable compromise because this is done only in an
_exceptional_ case, and the console output makes it very clear that this
file has been created.

Fixes #15339.
2017-10-27 17:06:33 -07:00
James Bardin e0ee1e4d6e Merge pull request #16070 from octo/defaultdatadir
backend/local: Remove unused const DefaultDataDir.
2017-10-02 16:27:23 -04:00
Martin Atkins 0fe43c8977 cli: allow disabling "next steps" message in terraform plan
In #15884 we adjusted the plan output to give an explicit command to run
to apply a plan, whereas before this command was just alluded to in the
prose.

Since releasing that, we've got good feedback that it's confusing to
include such instructions when Terraform is running in a workflow
automation tool, because such tools usually abstract away exactly what
commands are run and require users to take different actions to
proceed through the workflow.

To accommodate such environments while retaining helpful messages for
normal CLI usage, here we introduce a new environment variable
TF_IN_AUTOMATION which, when set to a non-empty value, is a hint to
Terraform that it isn't being run in an interactive command shell and
it should thus tone down the "next steps" messaging.

The documentation for this setting is included as part of the "...in
automation" guide since it's not generally useful in other cases. We also
intentionally disclaim comprehensive support for this since we want to
avoid creating an extreme number of "if running in automation..."
codepaths that would increase the testing matrix and hurt maintainability.

The focus is specifically on the output of the three commands we give in
the automation guide, which at present means the following two situations:

* "terraform init" does not include the final paragraphs that suggest
  running "terraform plan" and tell you in what situations you might need
  to re-run "terraform init".
* "terraform plan" does not include the final paragraphs that either
  warn about not specifying "-out=..." or instruct to run
  "terraform apply" with the generated plan file.
2017-09-14 10:51:41 -07:00
Florian Forster ce85600cd4 backend/local: Remove unused const DefaultDataDir.
Not to be confused with the const of the same name in the "command"
package.
2017-09-12 08:20:12 +02:00
James Bardin ac937a890d improve plugin reinit error text 2017-06-22 15:11:37 -04:00
James Bardin 7a955f990c make display plugin checksum error to user
The error follows a generic message, so can be ignored by users who may
not understand the implications.
2017-06-22 13:38:55 -04:00
James Bardin 5be15ed77c have the local backend provide a plugin init msg
During plan and apply, because the provider constraints need to be built
from a plan, they are not checked until the terraform.Context is
created. Since the context is always requested by the backend during the
Operation, the backend needs to be responsible for generating contextual
error messages for the user.

Instead of formatting the ResolveProviders errors during NewContext,
return a special error type, ResourceProviderError to signal that
init will be required. The backend can then extract and format the
errors.
2017-06-22 13:15:30 -04:00
Martin Atkins 418a8a8bc9 command + backend: rename various API objects to "Workspace" terminology
We're shifting terminology from "environment" to "workspace". This takes
care of some of the main internal API surface that was using the old
terminology, though is not intended to be entirely comprehensive and is
mainly just to minimize the amount of confusion for maintainers as we
continue moving towards eliminating the old terminology.
2017-06-09 16:26:25 -07:00
Martin Atkins 5026e1d313 backend/local: "environment_dir" renamed to "workspace_dir"
As part of switching our terminology, we begin a deprecation cycle for
"environment_dir" and advise users to switch to "workspace_dir" instead.
2017-06-09 15:01:39 -07:00
David Glasser c25d848ffb core: allow overriding environment name via env var
This allows you to run multiple concurrent terraform operations against
different environments from the same source directory.

Fixes #14447.

Also removes some dead code which appears to do the same thing as the function I
modified.
2017-06-09 15:01:39 -07:00
James Bardin 563cfd00df always wrap remote state in a BackupState
Use a local backup for remote state operations. This allows for manual
recovery in the case of a put failure.
2017-04-24 22:15:19 -04:00
Mitchell Hashimoto f63e8b3398
backend/local: run backend.TestBackend
This verifies that local behaves in an expected way by the backend
package.
2017-03-09 16:17:21 +05:30
Mitchell Hashimoto e75b666591
command: test multi-state to single state 2017-03-01 11:34:45 -08:00
James Bardin 4dac986a91 Local.StatePaths doesn't need to reutrn an error
add a test to ensure we have consistent output
2017-02-28 19:18:16 -05:00
James Bardin b53704ed87 Thread the environment through all commands
Add Env and SetEnv methods to command.Meta to retrieve the current
environment name inside any command.

Make sure all calls to Backend.State contain an environment name, and
make the package compile against the update backend package.
2017-02-28 16:35:46 -05:00
James Bardin 5762878eba Make backcend/legacy match new Backend iface
move the unsupported error value to backend.ErrNamedStatesNotSupported
to be used by any backend implementation.
2017-02-28 16:35:45 -05:00
James Bardin 65527f35a4 update local.Local to match the latest Backend
Update the methods, remove the handling of "current", and make tests
pass.
2017-02-28 16:07:31 -05:00
James Bardin fbc11c7961 fix incorrect current state in local backend
Forgot to remove the currentState field, which was not always set. The
current state should always just be read from the environment file.

Always return the default state name when we can't determine the state.
2017-02-28 16:07:07 -05:00
James Bardin e6eb71dde5 Add tests to check Backend delegation
Ensure that when MultiState methods are properly delegated when there is
a defined Local.Backend.
2017-02-28 16:07:06 -05:00
James Bardin 0933541a8c Split out the backend environment interface
Split the interface to change environments out from the minimal Backend
interface, to make it optional for backend implementations. If
backend.MultiState isn't implemented, return a "not implemented" from
environment related methods.

Have the Local backend delegate the MultiState methods to the proper
backend.
2017-02-28 16:06:14 -05:00
James Bardin dbc45b907c Make the Local backend handle its own named states
Add the functionality required for terraform environments
2017-02-28 16:03:36 -05:00
James Bardin 761c63d14a Update Backend to incorporate environments
Add the missing methods/arguments to handle Terraform environments in
Backends. Extra functionality simply returns defaults for now.
2017-02-28 16:03:36 -05:00
Mitchell Hashimoto 3cedfa00f4
command: use backend.CLIIinit
I made this interface way back with the original backend work and I
guess I forgot to hook it up! This is becoming an issue as I'm working
on our 2nd enhanced backend that requires this information and I
realized it was hardcoded before.

This propertly uses the CLIInit interface allowing any backend to gain
access to this data.
2017-02-28 10:58:29 -08:00
Mitchell Hashimoto ebb22d3ecd
backend/local: don't RefreshState on State API 2017-02-22 13:01:16 -08:00
James Bardin 9cdba1f199 enable local state locking for apply
Have the LocalBackend lock the state during operations, and enble this
for the apply comand.
2017-02-02 18:08:28 -05:00
Mitchell Hashimoto 397e1b3132
backend/local
The local backend implementation is an implementation of
backend.Enhanced that recreates all the behavior of the CLI but through
the backend interface.
2017-01-26 14:33:49 -08:00