Commit Graph

41 Commits

Author SHA1 Message Date
Martin Atkins 9a62ab3014 command: "terraform show" renders plans like "terraform plan"
During the Terraform 0.12 work we briefly had a partial update of the old
Terraform 0.11 (and prior) diff renderer that could work with the new
plan structure, but could produce only partial results.

We switched to the new plan implementation prior to release, but the
"terraform show" command was left calling into the old partial
implementation, and thus produced incomplete results when rendering a
saved plan.

Here we instead use the plan rendering logic from the "terraform plan"
command, making the output of both identical.

Unfortunately, due to the current backend architecture that logic lives
inside the local backend package, and it contains some business logic
around state and schema wrangling that would make it inappropriate to move
wholesale into the command/format package. To allow for a low-risk fix to
the "terraform show" output, here we avoid some more severe refactoring by
just exporting the rendering functionality in a way that allows the
"terraform show" command to call into it.

In future we'd like to move all of the code that actually writes to the
output into the "command" package so that the roles of these components
are better segregated, but that is too big a change to block fixing this
issue.
2019-11-06 06:53:32 -08:00
Martin Atkins 8664749b59 backend: Allow certain commands to opt out of required variable checks
Terraform Core expects all variables to be set, but for some ancillary
commands it's fine for them to just be set to placeholders because the
variable values themselves are not key to the command's functionality
as long as the terraform.Context is still self-consistent.

For such commands, rather than prompting for interactive input for
required variables we'll just stub them out as unknowns to reflect that
they are placeholders for values that a user would normally need to
provide.

This achieves a similar effect to how these commands behaved before, but
without the tendency to produce a slightly invalid terraform.Context that
would fail in strange ways when asked to run certain operations.
2019-10-10 10:07:01 -07:00
Lars Lehtonen 85b2000223 command/show: Fix dropped errors (#22772) 2019-09-13 10:51:32 -04:00
Kristin Laemmert c9d62bb2f6
command: discard output from flags package and return errs directly (#22373)
Any command using meta.defaultFlagSet *might* occasionally exit before
the flag package's output got written. This caused flag error messages
to get lost. This PR discards the flag package output in favor of
directly returning the error to the end user.
2019-08-16 08:31:21 -04:00
Kristin Laemmert b9f114aa25
command/show (json): marshal the state snapshot included with the plan file (#21597)
* command/show: marshal the state snapshot from the planfile

The planfile contains a state snapshot with certain resources updated
(outputs and datasources). Previously `terraform show -json PLANFILE`
was using the current state instead of the state inside the plan as
intended.

This caused an issue when the state included a terraform_remote_state
datasource. The datasource's state gets refreshed - and therefore
upgraded to the current state version - during plan, but that won't
persist to state until apply.

* update comment to reflect new return
2019-06-05 07:29:02 -04:00
Kristin Laemmert d5bb09b13b
command/show: refresh is required to show remote state (#20818) 2019-03-25 16:28:35 -04:00
Kristin Laemmert 9d0d564ec7
`terraform show` and `terraform providers schema -json` should return valid json (#20697)
* command/providers schemas: return empty json object if config parses successfully but no providers found
* command/show (state): return an empty object if state is nil
2019-03-14 14:52:07 -07:00
Kristin Laemmert d72defd044
command/show and state show: honor user-specified plugin-dir (#20557)
Previously, these commands were not checking if the user specified a
`-plugin-dir` flag during `terraform init` and would therefor fail if
providers were not in one of the standard directories.

Fixes #20547
2019-03-05 08:32:11 -08:00
Kristin Laemmert 8fb4e5ce6e
command/show: differentiate between state schemas and plan schemas. (#20516)
When a planfile is supplied to the `terraform show -json` command, the
context that loads only included schemas for resources in the plan. We
found an edge case where removing a data source from the configuration
(though only if there are no managed resources from the same provider)
would cause jsonstate.Marshal to fail because the provider schema wasn't
in the plan context.

jsonplan.Marshal now takes two schemas, one for plan and one for state.
If the state schema is nil it will simply use the plan schemas.
2019-03-01 13:59:57 -08:00
Nick Fagerlund 3c42508700
Apply suggestions from code review
Co-Authored-By: mildwonkey <mildwonkey@users.noreply.github.com>
2019-02-21 11:52:08 -08:00
Kristin Laemmert a43004e382 website/docs: add detailed documentation for the json serialization of
terraform plan
2019-02-14 14:20:54 -08:00
Kristin Laemmert f7ab90207c website/docs: add -json flag to terraform show docsn 2019-02-14 14:20:54 -08:00
Kristin Laemmert a2ac491cde
command/show: improvements to json output (#20139)
* command/show: add support for -json output for state

* command/jsonconfig: do not marshal empty count/for each expressions

* command/jsonstate: continue gracefully if the terraform version is somehow missing from state
2019-01-28 15:53:53 -08:00
Kristin Laemmert 514ac6b890
command/show: improvements to show -json output (#20110)
* terraform_version is now included in state
* provisioner "name" is now provisioner "type"
2019-01-24 15:28:53 -08:00
Kristin Laemmert 126e5f337f
json output of terraform plan (#19687)
* command/show: adding functions to aid refactoring

The planfile -> statefile -> state logic path was getting hard to follow
with blurry human eyes. The getPlan... and getState... functions were
added to help streamline the logic flow. Continued refactoring may follow.

* command/show: use ctx.Config() instead of a config snapshot

As originally written, the jsonconfig marshaller was getting an error
when loading configs that included one or more modules. It's not clear
if that was an error in the function call or in the configloader itself,
  but as a simpler solution existed I did not dig too far.

* command/jsonplan: implement jsonplan.Marshal

Split the `config` portion into a discrete package to aid in naming
sanity (so we could have for example jsonconfig.Resource instead of
jsonplan.ConfigResource) and to enable marshaling the config on it's
own.
2018-12-19 11:08:25 -08:00
Sander van Harmelen ef9054562e commands: make sure the correct flagset is used
A lot of commands used `c.Meta.flagSet()` to create the initial flagset for the command, while quite a few of them didn’t actually use or support the flags that are then added.

So I updated a few commands to use `flag.NewFlagSet()` instead to only add the flags that are actually needed/supported.

Additionally this prevents a few commands from using locking while they actually don’t need locking (as locking is enabled as a default in `c.Meta.flagSet()`.
2018-11-23 16:13:34 +01:00
Sander van Harmelen 178ec8f7b4 Remove support for the -module-depth flag
# Conflicts:
#	backend/backend.go
2018-11-02 18:44:04 +01:00
Sander van Harmelen 5458a91985 command/state: update and fix the state show command 2018-10-27 15:15:25 +02:00
Kristin Laemmert a4c3022cf8 command/show: config files are assumed to be in cwd 2018-10-16 19:14:11 -07:00
Kristin Laemmert 14c28b8de4 cli: format/state refactor to use blockBodyDiffPrinter
Use functions from format/diff to print values
2018-10-16 19:14:11 -07:00
Kristin Laemmert 8063f69e5c cli: format/state refactor for new state format
format/state now requires provider schemas to properly format output
state. command/show has been modified to pass a context to format.State.
2018-10-16 19:14:11 -07:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
Martin Atkins ebafa51723 command: Various updates for the new backend package API
This is a rather-messy, complex change to get the "command" package
building again against the new backend API that was updated for
the new configuration loader.

A lot of this is mechanical rewriting to the new API, but
meta_config.go and meta_backend.go in particular saw some major
changes to interface with the new loader APIs and to deal with
the change in order of steps in the backend API.
2018-10-16 18:44:26 -07:00
Martin Atkins 3ea159297c command/format: improve consistency of plan results
Previously the rendered plan output was constructed directly from the
core plan and then annotated with counts derived from the count hook.
At various places we applied little adjustments to deal with the fact that
the user-facing diff model is not identical to the internal diff model,
including the special handling of data source reads and destroys. Since
this logic was just muddled into the rendering code, it behaved
inconsistently with the tally of adds, updates and deletes.

This change reworks the plan formatter so that it happens in two stages:
- First, we produce a specialized Plan object that is tailored for use
  in the UI. This applies all the relevant logic to transform the
  physical model into the user model.
- Second, we do a straightforward visual rendering of the display-oriented
  plan object.

For the moment this is slightly overkill since there's only one rendering
path, but it does give us the benefit of letting the counts be derived
from the same data as the full detailed diff, ensuring that they'll stay
consistent.

Later we may choose to have other UIs for plans, such as a
machine-readable output intended to drive a web UI. In that case, we'd
want the web UI to consume a serialization of the _display-oriented_ plan
so that it doesn't need to re-implement all of these UI special cases.

This introduces to core a new diff action type for "refresh". Currently
this is used _only_ in the UI layer, to represent data source reads.
Later it would be good to use this type for the core diff as well, to
improve consistency, but that is left for another day to keep this change
focused on the UI.
2017-09-01 17:55:05 -07:00
Robert Liebowitz 006744bfe0 Use all tfvars files in working directory
As a side effect, several commands that previously did not have a failure
state can now fail during meta-parameter processing.
2017-07-05 17:24:17 -07:00
Martin Atkins 418a8a8bc9 command + backend: rename various API objects to "Workspace" terminology
We're shifting terminology from "environment" to "workspace". This takes
care of some of the main internal API surface that was using the old
terminology, though is not intended to be entirely comprehensive and is
mainly just to minimize the amount of confusion for maintainers as we
continue moving towards eliminating the old terminology.
2017-06-09 16:26:25 -07:00
James Bardin b53704ed87 Thread the environment through all commands
Add Env and SetEnv methods to command.Meta to retrieve the current
environment name inside any command.

Make sure all calls to Backend.State contain an environment name, and
make the package compile against the update backend package.
2017-02-28 16:35:46 -05:00
Mitchell Hashimoto ad7b063262
command: convert to use backends 2017-01-26 14:33:49 -08:00
Paul Hinze e67fc0fe9b command: Change module-depth default to -1
This means that terraform commands like `plan`, `apply`, `show`, and
`graph` will expand all modules by default.

While modules-as-black-boxes is still very true in the conceptual design
of modules, feedback on this behavior has consistently suggested that
users would prefer to see more verbose output by default.

The `-module-depth` flag and env var are retained to allow output to be
optionally limited / summarized by these commands.
2016-01-20 13:58:02 -06:00
Paul Hinze cb5c2567b3 core: fix `terraform show` with remote state
fixes #1810
2015-06-16 12:26:04 -05:00
Paul Hinze 29d34cd5a4 command: allow module depth to be set via env var
Another convienence env var here with TF_MODULE_DEPTH.

Works like you'd expect it to!
2015-04-30 16:19:43 -05:00
Mitchell Hashimoto 579f102f37 command: start migrating to new state package 2015-02-23 15:13:54 -08:00
Armon Dadgar cce881aadd command/show: enable printing of remote state 2014-12-10 13:27:11 -08:00
Mitchell Hashimoto dac5f0e3df command/show: update help 2014-10-11 12:57:47 -07:00
Mitchell Hashimoto 069f758efb command/show: show default state with no args [GH-349] 2014-10-11 12:56:55 -07:00
Mitchell Hashimoto e5e51d7b17 command: state output is well formatted for modules 2014-09-25 19:25:10 -07:00
Mitchell Hashimoto 8c17062638 command: plan shows module-level, can control depth 2014-09-24 22:54:51 -07:00
Mitchell Hashimoto 642fed0356 command: terraform.tfvars loaded by default if it exists 2014-08-05 09:32:01 -07:00
Mitchell Hashimoto 687c5cd35c command/show: remove unused fields in struct 2014-07-13 09:21:44 -07:00
Mitchell Hashimoto 6c736bd3c4 command: introduce Meta and "-no-color" option 2014-07-12 20:21:46 -07:00
Mitchell Hashimoto dbc1c63d79 command/show 2014-07-12 19:47:31 -07:00