Commit Graph

12 Commits

Author SHA1 Message Date
Martin Atkins 0b734a2803 command: Make provider installation interruptible
In earlier commits we started to make the installation codepath
context-aware so that it could be canceled in the event of a SIGINT, but
we didn't complete wiring that through the API of the getproviders
package.

Here we make the getproviders.Source interface methods, along with some
other functions that can make network requests, take a context.Context
argument and act appropriately if that context is cancelled.

The main providercache.Installer.EnsureProviderVersions method now also
has some context-awareness so that it can abort its work early if its
context reports any sort of error. That avoids waiting for the process
to wind through all of the remaining iterations of the various loops,
logging each request failure separately, and instead returns just
a single aggregate "canceled" error.

We can then set things up in the "terraform init" and
"terraform providers mirror" commands so that the context will be
cancelled if we get an interrupt signal, allowing provider installation
to abort early while still atomically completing any local-side effects
that may have started.
2020-09-29 10:00:35 -07:00
Martin Atkins ef64df950c getproviders: Prepare for having multiple valid hashes per package
As we continue iterating towards saving valid hashes for a package in a
depsfile lock file after installation and verifying them on future
installation, this prepares getproviders for the possibility of having
multiple valid hashes per package.

This will arise in future commits for two reasons:
- We will need to support both the legacy "zip hash" hashing scheme and
  the new-style content-based hashing scheme because currently the
  registry protocol is only able to produce the legacy scheme, but our
  other installation sources prefer the content-based scheme. Therefore
  packages will typically have a mixture of hashes of both types.
- Installing from an upstream registry will save the hashes for the
  packages across all supported platforms, rather than just the current
  platform, and we'll consider all of those valid for future installation
  if we see both successful matching of the current platform checksum and
  a signature verification for the checksums file as a whole.

This also includes some more preparation for the second case above in that
signatureAuthentication now supports AcceptableHashes and returns all of
the zip-based hashes it can find in the checksums file. This is a bit of
an abstraction leak because previously that authenticator considered its
"document" to just be opaque bytes, but we want to make sure that we can
only end up trusting _all_ of the hashes if we've verified that the
document is signed. Hopefully we'll make this better in a future commit
with some refactoring, but that's deferred for now in order to minimize
disruption to existing codepaths while we work towards a provider locking
MVP.
2020-09-24 14:01:54 -07:00
Alisdair McDiarmid fc7e467d19 command: Add redirect support to 0.13upgrade
If a provider changes namespace in the registry, we can detect this when
running the 0.13upgrade command. As long as there is a version matching
the user's constraints, we now use the provider's new source address.
Otherwise, warn the user that the provider has moved and a version
upgrade is necessary to move to it.
2020-08-31 14:53:35 -04:00
Martin Atkins 2bd2a9a923 internal/getproviders: HTTPMirrorSource implementation
We previously had this just stubbed out because it was a stretch goal for
the v0.13.0 release and it ultimately didn't make it in.

Here we fill out the existing stub -- with a minor change to its interface
so it can access credentials -- with a client implementation that is
compatible with the directory structure produced by the
"terraform providers mirror" subcommand, were the result to be published
on a static file server.
2020-08-26 13:18:08 -07:00
Kristin Laemmert 47e657c611
internal/getproviders: decode and return any registry warnings (#25337)
* internal/getproviders: decode and return any registry warnings

The public registry may include a list of warnings in the "versions"
response for any given provider. This PR adds support for warnings from
the registry and an installer event to return those warnings to the
user.
2020-06-25 10:49:48 -04:00
Alisdair McDiarmid e27a36cafd internal/getproviders: Retry failed HTTP requests
This is a port of the retry/timeout logic added in #24260 and #24259,
using the same environment variables to configure the retry and timeout
settings.
2020-05-13 09:48:41 -04:00
Kristin Laemmert 60321b41e8
getproviders: move protocol compatibility functions into registry client (#24846)
* internal/registry source: return error if requested provider version protocols are not supported

* getproviders: move responsibility for protocol compatibility checks into the registry client

The original implementation had the providercache checking the provider
metadata for protocol compatibility, but this is only relevant for the
registry source so it made more sense to move the logic into
getproviders.

This also addresses an issue where we were pulling the metadata for
every provider version until we found one that was supported. I've
extended the registry client to unmarshal the protocols in
`ProviderVersions` so we can filter through that list, instead of
pulling each version's metadata.
2020-05-11 13:49:12 -04:00
Alisdair McDiarmid 62b0cbed12 internal: Fix LookupLegacyProvider
When looking up the namespace for a legacy provider source, we need to
use the /v1/providers/-/{name}/versions endpoint. For non-HashiCorp
providers, the /v1/providers/-/{name} endpoint returns a 404.

This commit updates the LegacyProviderDefaultNamespace method and the
mock registry servers accordingly.
2020-05-08 12:29:25 -04:00
Alisdair McDiarmid a5b3d497cc internal: Verify provider signatures on install
Providers installed from the registry are accompanied by a list of
checksums (the "SHA256SUMS" file), which is cryptographically signed to
allow package authentication. The process of verifying this has multiple
steps:

- First we must verify that the SHA256 hash of the package archive
  matches the expected hash. This could be done for local installations
  too, in the future.
- Next we ensure that the expected hash returned as part of the registry
  API response matches an entry in the checksum list.
- Finally we verify the cryptographic signature of the checksum list,
  using the public keys provided by the registry.

Each of these steps is implemented as a separate PackageAuthentication
type. The local archive installation mechanism uses only the archive
checksum authenticator, and the HTTP installation uses all three in the
order given.

The package authentication system now also returns a result value, which
is used by command/init to display the result of the authentication
process.

There are three tiers of signature, each of which is presented
differently to the user:

- Signatures from the embedded HashiCorp public key indicate that the
  provider is officially supported by HashiCorp;
- If the signing key is not from HashiCorp, it may have an associated
  trust signature, which indicates that the provider is from one of
  HashiCorp's trusted partners;
- Otherwise, if the signature is valid, this is a community provider.
2020-04-17 13:57:19 -04:00
Martin Atkins 4d7122a0dd internal/getproviders: LookupLegacyProvider
This is a temporary helper so that we can potentially ship the new
provider installer without making a breaking change by relying on the
old default namespace lookup API on the default registry to find a proper
FQN for a legacy provider provider address during installation.

If it's given a non-legacy provider address then it just returns the given
address verbatim, so any codepath using it will also correctly handle
explicit full provider addresses. This also means it will automatically
self-disable once we stop using addrs.NewLegacyProvider in the config
loader, because there will therefore no longer be any legacy provider
addresses in the config to resolve. (They'll be "default" provider
addresses instead, assumed to be under registry.terraform.io/hashicorp/* )

It's not decided yet whether we will actually introduce the new provider
in a minor release, but even if we don't this API function will likely be
useful for a hypothetical automatic upgrade tool to introduce explicit
full provider addresses into existing modules that currently rely on
the equivalent to this lookup in the current provider installer.

This is dead code for now, but my intent is that it would either be called
as part of new provider installation to produce an address suitable to
pass to Source.AvailableVersions, or it would be called from the
aforementioned hypothetical upgrade tool.

Whatever happens, these functions can be removed no later than one whole
major release after the new provider installer is introduced, when
everyone's had the opportunity to update their legacy unqualified
addresses.
2020-01-22 09:02:22 -08:00
Martin Atkins a77bc59c44 internal/getproviders: Package URL should always be absolute
Registries backed by static files are likely to use relative paths to
their archives for simplicity's sake, but we'll normalize them to be
absolute before returning because the caller wouldn't otherwise know what
to resolve the URLs relative to.
2020-01-10 09:41:27 -08:00
Martin Atkins c76260e957 internal/getproviders: Query a provider registry
Our existing provider installer was originally built to work with
releases.hashicorp.com and later retrofitted to talk to the official
Terraform Registry. It also assumes a flat namespace of providers.

We're starting a new one here, copying and adapting code from the old one
as necessary, so that we can build out this new API while retaining all
of the existing functionality and then cut over to this new implementation
in a later step.

Here we're creating a foundational component for the new installer, which
is a mechanism to query for the available versions and download locations
of a particular provider.

Subsequent commits in this package will introduce other Source
implementations for installing from network and filesystem mirrors.
2020-01-10 09:41:27 -08:00