Commit Graph

1239 Commits

Author SHA1 Message Date
Martin Atkins 6adcc7ab73 vendor: go get github.com/zclconf/go-cty@master
cty now guarantees that sets of primitive values will iterate in a
reasonable order. Previously it was the caller's responsibility to deal
with that, but we invariably neglected to do so, causing inconsistent
ordering. Since cty prioritizes consistent behavior over performance, it
now imposes its own sort on set elements as part of iterating over them so
that calling applications don't have to worry so much about it.

This change also causes cty to consistently push unknown and null values
in sets to the end of iteration, where before that was undefined. This
means that our diff output will now consistently list additions before
removals when showing sets, rather than the ordering being undefined as
before.

The ordering of known, non-null, non-primitive values is still not
contractually fixed but remains consistent for a particular version of
cty.
2019-04-30 15:49:28 -07:00
Martin Atkins eed605ac05 [WIP] Re-enable the end-to-end tests (#20044)
* internal/initwd: Allow deprecated relative module paths

In Terraform 0.11 we deprecated this form but didn't have any explicit
warning for it. Now we'll still accept it but generate a warning. In a
future major release we will drop this form altogether, since it is
ambiguous with registry module source addresses.

This codepath is covered by the command/e2etest suite.

* e2e: Skip copying .exists file, if present

We use this only in the "empty" test fixture in order to let git know that
the directory exists. We need to skip copying it so that we can test
"terraform init -from-module=...", which expects to find an empty
directory.

* command/e2etests: Re-enable and fix up the e2etest "acctests"

We disabled all of the tests that accessed remote services like the
Terraform Registry while they were being updated to support the new
protocols we now expect. With those services now in place, we can
re-enable these tests.

Some details of exactly what output we print, etc, have intentionally
changed since these tests were last updated.

* e2e: refactor for modern states and plans

* command/e2etest: re-enable e2etests and update for tf 0.12 compatibility
plugin/discovery: mkdirAll instead of mkdir when creating cache dir
2019-04-29 13:03:24 -04:00
Sander van Harmelen e41c2ecdce
Merge pull request #21139 from hashicorp/svh/b-stdin
Make sure UIInput keeps working after being canceled
2019-04-29 17:58:29 +02:00
Sander van Harmelen 9ab2e9d8b2 Make sure UIInput keeps working after being canceled
Once you start reading from stdin, that is a blocking call that will
never finish. So when a context is canceled causing the input method to
return, the read will remain blocking in the running goroutine.

There isn't a real solution for it (e.g. its not possible to unblock the
read) so the only solution is to make the reader reusable.
2019-04-29 15:15:26 +02:00
James Bardin f79a768a4e command/format: take noop changes from lcs
When rendering the diff, the NoOp changes should come from the LCS
sequence, rather than the new sequence. The two indexes will not align
in many cases, adding the wrong new object or indexing out of bounds.
2019-04-27 11:28:02 -04:00
Przemysław Dąbek 9605b093d9 command/graph: use user-supplied plugin path when running graph command (#18083) 2019-04-17 13:48:11 -04:00
Kristin Laemmert c1079b59bd
command/state_list.go: fix bug loading user-defined state (#21015)
* command/state_list.go: fix bug loading user-defined state

If the user supplied a state path via the `-state` flag and terraform
was running in a workspace other than `default`, the state was not being
loaded properly. Fixes #19920
2019-04-15 12:22:07 -04:00
Kristin Laemmert 1c95b21c6c
command/output: get the state path from the workspace or CLI argument (#20994)
Previously this command was setting the state path to the default state
file, instead of honoring the backend configuration.
2019-04-12 07:37:27 -04:00
Martin Atkins 88e76fa9ef configs/configschema: Introduce the NestingGroup mode for blocks
In study of existing providers we've found a pattern we werent previously
accounting for of using a nested block type to represent a group of
arguments that relate to a particular feature that is always enabled but
where it improves configuration readability to group all of its settings
together in a nested block.

The existing NestingSingle was not a good fit for this because it is
designed under the assumption that the presence or absence of the block
has some significance in enabling or disabling the relevant feature, and
so for these always-active cases we'd generate a misleading plan where
the settings for the feature appear totally absent, rather than showing
the default values that will be selected.

NestingGroup is, therefore, a slight variation of NestingSingle where
presence vs. absence of the block is not distinguishable (it's never null)
and instead its contents are treated as unset when the block is absent.
This then in turn causes any default values associated with the nested
arguments to be honored and displayed in the plan whenever the block is
not explicitly configured.

The current SDK cannot activate this mode, but that's okay because its
"legacy type system" opt-out flag allows it to force a block to be
processed in this way anyway. We're adding this now so that we can
introduce the feature in a future SDK without causing a breaking change
to the protocol, since the set of possible block nesting modes is not
extensible.
2019-04-10 14:53:52 -07:00
Pam Selle 346e341ff2 Only display status link if public registry used
Updates to throw a specific error if using the defined public
registry vs. another registry.
2019-04-05 16:49:27 -04:00
Kristin Laemmert f8a5e17d3d
command/format: improve "source" of error messages regarding missing arguments (#20907)
* vendor: update hcl2 dependency
* command/format: revert diagnostic format behavior if snippet or highlight range is empty
2019-04-03 14:04:59 -04:00
Frederic 0f1f504c22 command/format: indicate in diff when adding an attribute forces replacement 2019-03-29 14:52:13 -07:00
Pam Selle ff7245f27c Add status link to make message more helpful 2019-03-27 16:22:37 -04:00
Pam Selle d72456d188 Add friendly error for when registry unresponsive
If the registry is unresponsive, you will now get an error
specific to this, rather than a misleading "provider unavailable" type
error. Also adds debug logging for when errors like this may occur
2019-03-27 14:39:14 -04:00
Kristin Laemmert d5bb09b13b
command/show: refresh is required to show remote state (#20818) 2019-03-25 16:28:35 -04:00
Justin Downing 1e32ae243c grammatical updates to comments and docs (#20195) 2019-03-21 14:05:41 -07:00
findkim 161fe47b34 plugin/discovery: improve providery discovery verification errors 2019-03-21 14:38:51 -05:00
Martin Atkins e918fa83ec command/format: Don't panic when item removed from list of objects
Due to these tests happening in the wrong order, removing an object from
the end of a sequence of objects would previously cause a bounds-check
panic.

Rather than a more severe rework of the logic here, for now we'll just
introduce an extra precondition to prevent the panic. The code that
follows already handles the case where there _is_ no new object (i.e. the
"old" object is being deleted) as long as we're able to pass through this
type-checking logic.

The new "JSON list of objects - removing item" test covers this problem
by rendering a diff for an object being removed from the end of a list
of objects within a JSON value.
2019-03-19 15:46:40 -07:00
Justin Campbell e696e063dc
Merge pull request #20674 from hashicorp/registry-warnings
plugin/discovery: Parse warnings from TF Registry
2019-03-18 13:12:26 -04:00
Justin Campbell e6316c9de6 plugin/discovery: Parse warnings from TF Registry
Terraform Registry (and other registry implementations) can now return
an array of warnings with the versions response. These warnings are now
displayed to the user during a `terraform init`.
2019-03-18 12:21:27 -04:00
Justin Campbell 24e13d8ec1 plugin/discovery: Return tfdiags from Get
Allows us to surface warnings to the user using the tfdiags interfaces.
2019-03-18 12:21:27 -04:00
Martin Atkins c39905e1a8 command: Fix various issues in the "terraform state ..." subcommands
In earlier refactoring we updated these commands to support the new
address and state types, but attempted to partially retain the old-style
"StateFilter" abstraction that originally lived in the Terraform package,
even though that was no longer being used for any other functionality.

Unfortunately the adaptation of the existing filtering to the new types
wasn't exact and so these commands ended up having a few bugs that were
not covered by the existing tests.

Since the old StateFilter behavior was the source of various misbehavior
anyway, here it's removed altogether and replaced with some simpler
functions in the state_meta.go file that are tailored to the use-cases of
these sub-commands.

As well as just generally behaving more consistently with the other
parts of Terraform that use the new resource address types, this commit
fixes the following bugs:

- A resource address of aws_instance.foo would previously match an
  resource of that type and name in any module, which disagreed with the
  expected interpretation elsewhere of meaning a single resource in the
  root module.

- The "terraform state mv" command was not supporting moves from a single
  resource address to an indexed address and vice-versa, because the old
  logic didn't need to make that distinction while they are two separate
  address types in the new logic. Now we allow resources that do not have
  count/for_each to be treated as if they are instances for the purposes
  of this command, which is a better match for likely user intent and for
  the old behavior.

Finally, we also clean up a little some of the usage output from these
commands, which hasn't been updated for some time and so had both some
stale information and some inaccurate terminology.
2019-03-18 09:19:55 -07:00
Kristin Laemmert c73a5fc07d
command/show: add provider name to resource changes (#20711) 2019-03-15 13:20:43 -07:00
Kristin Laemmert 9d0d564ec7
`terraform show` and `terraform providers schema -json` should return valid json (#20697)
* command/providers schemas: return empty json object if config parses successfully but no providers found
* command/show (state): return an empty object if state is nil
2019-03-14 14:52:07 -07:00
James Bardin 0569e39788 don't try to treat "null" as json in diff output
Trying to decode and write "null" as json will panic, since it decodes
to nil.
2019-03-14 17:20:42 -04:00
Kristin Laemmert a15a4acf2f
configs/configupgrade: detect possible relative module sources (#20646)
* configs/configupgrade: detect possible relative module sources

If a module source appears to be a relative local path but does not have
a preceding ./, print a #TODO message for the user.

* internal/initwd: limit go-getter detectors to those supported by terraform
* internal/initwd: move isMaybeRelativeLocalPath check into getWithGoGetter

To avoid making two calls to getter.Detect, which potentially makes
non-trivial API calls, the "isMaybeRelativeLocalPath" check was moved to
a later step and a custom error type was added so user-friendly
diagnostics could be displayed in the event that a possible relative local
path was detected.
2019-03-13 11:17:14 -07:00
James Bardin a8df5586c0 check for errors when loading a backend config
We can't dereference the config module if there were any errors loading
it.
2019-03-12 17:57:26 -04:00
Martin Atkins 2d41c1009b command/format: Diffs for NestingMap block types
Our initial prototype of new-style diff rendering excluded this because
the old SDK has no support for this construct. However, we want to be able
to introduce this construct in the new SDK without breaking compatibility
with existing versions of Terraform Core, so we need to implement it now
so it's ready to be used once the SDK implements it.

The key associated with each block allows us to properly correlate the
items to recognize the difference between an in-place update of an
existing block and the addition/deletion of a block.
2019-03-11 08:18:26 -07:00
Martin Atkins dd1fa322a7 command/format: Support list/map blocks with dynamic-typed attrs
Our null-to-empty normalization was previously assuming these would always
be collection types, but that isn't true when a block contains something
dynamic since we must then use tuple or object types instead to properly
represent all of the individual element types.
2019-03-11 08:18:26 -07:00
Martin Atkins 69772b11b1 command/format: test for diff rendering with dynamic-typed subattrs
We use cty a little differently when a nested list block contains a
dynamically-typed attribute: it appears as a tuple value instead of a
list value so that we can retain the individual types of each element.

Here we introduce a test for that case, but doing so required also making
the runTestCases function handle types in a stricter way so that it will
produce planned values that match how Terraform Core would do it,
including the necessary late-bound type information for the
dynamically-typed attribute.
2019-03-11 08:18:26 -07:00
Kristin Laemmert 30672faebe
remove indentation from json output of `show` and `providers schema` (#20623)
* command/providers schema: correct help text

* command/show: remove indentation from json output

* command/providers schema: remove indentation from json output
2019-03-11 07:29:36 -07:00
James Bardin b8e53255b4 Revert "remove NormalizeObjectFromLegacySDK from diff"
This reverts commit 5c40d6610c.
2019-03-08 17:32:41 -05:00
Sander van Harmelen 973e2a7cf9 core: add a context to the UIInput interface 2019-03-08 10:24:40 +01:00
James Bardin a95d97f066
Merge pull request #20595 from hashicorp/jbardin/normalize-objects
normalize all objects read from the provider
2019-03-06 17:13:23 -05:00
James Bardin 5c40d6610c remove NormalizeObjectFromLegacySDK from diff
The NormalizeObjectFromLegacySDK calls have been moved into the
provider shims, so all objects generated by the provider should conform
now.
2019-03-06 16:21:32 -05:00
Brian Flad 20a814028d
command: Consistency implement and document parallelism default of 10
References:
* f4da82a023/command/command.go (L41)
* b9d8e96e0c/terraform/context.go (L149-L155)
2019-03-06 09:25:36 -05:00
Kristin Laemmert b9d8e96e0c
command/plan: plan output should indicate if a resource is being (#20580)
replaced because the instance was tainted.
2019-03-05 16:18:55 -08:00
Kristin Laemmert d72defd044
command/show and state show: honor user-specified plugin-dir (#20557)
Previously, these commands were not checking if the user specified a
`-plugin-dir` flag during `terraform init` and would therefor fail if
providers were not in one of the standard directories.

Fixes #20547
2019-03-05 08:32:11 -08:00
James Bardin 369d512e22
Merge pull request #20546 from hashicorp/jbardin/backend-init-panic
don't panic of the users aborts backend input
2019-03-01 19:03:49 -05:00
James Bardin 2adf5801d9 don't panic of the users aborts backend input
When the user aborts input, it may end up as an unknown value, which
needs to be converted to null for PrepareConfig.

Allow PrepareConfig to accept null config values in order to fill in
missing defaults.
2019-03-01 18:45:06 -05:00
Kristin Laemmert 8fb4e5ce6e
command/show: differentiate between state schemas and plan schemas. (#20516)
When a planfile is supplied to the `terraform show -json` command, the
context that loads only included schemas for resources in the plan. We
found an edge case where removing a data source from the configuration
(though only if there are no managed resources from the same provider)
would cause jsonstate.Marshal to fail because the provider schema wasn't
in the plan context.

jsonplan.Marshal now takes two schemas, one for plan and one for state.
If the state schema is nil it will simply use the plan schemas.
2019-03-01 13:59:57 -08:00
Kristin Laemmert c4151b7c7c
command/show: fixing bugs in modulecalls (#20513)
* command/show: fixing bugs in modulecalls

jsonconfig and jsonplan both had subtle bugs with the logic for
marshaling module calls that only showed up when multiple modules were
referenced. This PR fixes those bugs and extends the existing tests to
include multiple modules.

* sort all the things, mostly for tests
2019-03-01 13:59:12 -08:00
Kristin Laemmert 21f6e3dffd
Mildwonkey/012 docs updated (#20542)
* docs: update plan command documentation. Fixes #19235

* docs: added a missing reserved variable name. Fixes #19159.

* website: add note that resource names cannot start with a number

* website: add some notes to the 0.12 upgrade guide
2019-03-01 12:30:51 -08:00
Martin Atkins f193b11073 command/format: Normalize before/after values before rendering
We are now allowing the legacy SDK to opt out of the safety checks we try
to do after plan and apply, and so in such cases the before/after values
in planned changes may be inconsistent with our usual rules.

To avoid adding lots of extra complexity to the diff renderer to deal with
these situations, instead we'll normalize the handling of nested blocks
prior to using these values.

In the long run it'd be better to do this normalization at the source,
immediately after we receive an object from a provider using the opt-out,
but we're doing this at the outermost layer for now to avoid risking
unintended impacts on other Terraform Core components when we're just
about to enter the beta phase of the v0.12.0 release cycle.
2019-02-27 16:53:29 -08:00
James Bardin f43b87a61e
Merge pull request #20480 from hashicorp/jbardin/backend-init
backend init defaults and inputs
2019-02-26 15:04:00 -05:00
James Bardin c814f2da37 Change backend.ValidateConfig to PrepareConfig
This mirrors the change made for providers, so that default values can
be inserted into the config by the backend implementation. This is only
the interface and method name changes, it does not yet add any default
values.
2019-02-25 18:37:20 -05:00
Martin Atkins 6b6be3af35 command: Remove promise of plan -validate-only from validate docs
We brought forward a new implementation of "terraform validate" that was
originally scheduled for a later release after finding that it would be
simpler than reworking the old implementation for new v0.12 assumptions,
but we didn't yet implement "terraform plan -validate-only" in spite of
it being mentioned in the updated docs for "terraform validate".

For now then, the documentation will make the weaker suggestion of running
"terraform plan" to validate a particular _run_ rather than a particular
_module_, which is the closest thing we have for now. At some point after
v0.12.0 we will evaluate whether a validate-only mode for "terraform plan"
(which could then run without configuring the providers at all) is needed.
2019-02-25 14:27:59 -08:00
Kristin Laemmert 16823f43de
command/jsonprovider: export providers schemas to json (#20446)
* command/jsonprovider: a new package for exporting providers schemas as JSON
2019-02-25 13:32:47 -08:00
Martin Atkins 552dddfb4c command: Specialized error message for var decls in tfvars
A common new-user mistake is to place variable _declarations_ into .tfvars
files instead of variable _values_. To guide towards the correct approach
here, we add a specialized error message for that situation that includes
guidance on the distinction between declaring and setting values for
variables, and an example of what setting a value should look like.
2019-02-22 18:04:01 -08:00
Kristin Laemmert 4dd8192ec7
Merge pull request #20352 from hashicorp/mildwonkey/show-docs
mildwonkey/show-docs
2019-02-22 08:19:01 -08:00