Commit Graph

120 Commits

Author SHA1 Message Date
James Bardin fe3aff91f3 missingPlugins should not return internal plugins
Filter the internal plugins out beforehand, so we don't attempt to
locate them at all during init.
2018-01-05 11:52:11 -05:00
James Bardin ea4cb6a20e check state version during init
The init command needs to parse the state to resolve providers, but
changes to the state format can cause that to fail with difficult to
understand errors. Check the terraform version during init and provide
the same error that would be returned by plan or apply.
2017-12-15 11:17:59 -05:00
Martin Atkins 9a5c865040 command: validate config as part of loading it
Previously we required callers to separately call .Validate on the root
module to determine if there were any value errors, but we did that
inconsistently and would thus see crashes in some cases where later code
would try to use invalid configuration as if it were valid.

Now we run .Validate automatically after config loading, returning the
resulting diagnostics. Since we return a diagnostics here, it's possible
to return both warnings and errors.

We return the loaded module even if it's invalid, so callers are free to
ignore returned errors and try to work with the config anyway, though they
will need to be defensive against invalid configuration themselves in
that case.

As a result of this, all of the commands that load configuration now need
to use diagnostic printing to signal errors. For the moment this just
allows us to return potentially-multiple config errors/warnings in full
fidelity, but also sets us up for later when more subsystems are able
to produce rich diagnostics so we can show them all together.

Finally, this commit also removes some stale, commented-out code for the
"legacy" (pre-0.8) graph implementation, which has not been available
for some time.
2017-12-07 14:28:43 -08:00
Martin Atkins ba0514106a return tfdiags.Diagnostics from validation methods
Validation is the best time to return detailed diagnostics
to the user since we're much more likely to have source
location information, etc than we are in later operations.

This change doesn't actually add any detail to the messages
yet, but it changes the interface so that we can gradually
introduce more detailed diagnostics over time.

While here there are some minor adjustments to some of the
messages to improve their consistency with terminology we
use elsewhere.
2017-11-28 11:15:29 -08:00
Martin Atkins 3b180d7f8a
Merge #16543: Bring the "terraform" provider back into core 2017-11-03 12:08:31 -07:00
Martin Atkins d4ee58ce59 Re-integrate the "terraform" provider into the main binary
As part of the 0.10 core/provider split we moved this provider, along with
all the others, out into its own repository.

In retrospect, the "terraform" provider doesn't really make sense to be
separated since it's just a thin wrapper around some core code anyway,
and so re-integrating it into core avoids the confusion that results when
Terraform Core and the terraform provider have inconsistent versions of
the backend code and dependencies.

There is no good reason to use a different version of the backend code
in the provider than in core, so this new "internal provider" mechanism
is stricter than the old one: it's not possible to use an external build
of this provider at all, and version constraints for it are rejected as
a result.

This provider is also run in-process rather than in a child process, since
again it's just a very thin wrapper around code that's already running
in Terraform core anyway, and so the process barrier between the two does
not create enough advantage to warrant the additional complexity.
2017-11-03 11:36:31 -07:00
James Bardin 9c334fe012 update init output
Change "Downloading" to 'Initializing" to match the provider loading
dialog.

List each module being loaded.

If a regisry module is being downloaded, list the registry host, and the
version discovered.

Show the source string from the config that is being fetched, rather
than the go-getter url. The full source can be found in the logs for
debugging.

Add much more extensive logging
2017-11-03 10:28:07 -04:00
James Bardin f64851242e use Storage.GetModule for init -from-module
This will enable copying any module source into a target directory.
2017-10-27 19:27:20 -04:00
Martin Atkins 5cd00a13ec command: use new diagnostics output for config errors
This uses the new diagnostics printer for config-related errors in the
main five commands that deal with config.

The immediate motivation for this is to allow HCL2-produced diagnostics
to be printed out in their full fidelity, though it also slightly changes
the presentation of other errors so that they are not presented in all
red text, which can be hard to read on some terminals.
2017-10-06 11:46:07 -07:00
Martin Atkins 5c0670fdf4 command: allow callers to activate a plugin cache
Here we add a new caller-settable field to command.Meta that activates
a read-through cache directory for plugin installation.
2017-09-29 14:03:09 -07:00
Martin Atkins 2ed9aa6077 command: autocomplete data for "terraform init" 2017-09-26 14:01:13 -07:00
Martin Atkins 0fe43c8977 cli: allow disabling "next steps" message in terraform plan
In #15884 we adjusted the plan output to give an explicit command to run
to apply a plan, whereas before this command was just alluded to in the
prose.

Since releasing that, we've got good feedback that it's confusing to
include such instructions when Terraform is running in a workflow
automation tool, because such tools usually abstract away exactly what
commands are run and require users to take different actions to
proceed through the workflow.

To accommodate such environments while retaining helpful messages for
normal CLI usage, here we introduce a new environment variable
TF_IN_AUTOMATION which, when set to a non-empty value, is a hint to
Terraform that it isn't being run in an interactive command shell and
it should thus tone down the "next steps" messaging.

The documentation for this setting is included as part of the "...in
automation" guide since it's not generally useful in other cases. We also
intentionally disclaim comprehensive support for this since we want to
avoid creating an extreme number of "if running in automation..."
codepaths that would increase the testing matrix and hurt maintainability.

The focus is specifically on the output of the three commands we give in
the automation guide, which at present means the following two situations:

* "terraform init" does not include the final paragraphs that suggest
  running "terraform plan" and tell you in what situations you might need
  to re-run "terraform init".
* "terraform plan" does not include the final paragraphs that either
  warn about not specifying "-out=..." or instruct to run
  "terraform apply" with the generated plan file.
2017-09-14 10:51:41 -07:00
Sunny 2d849f8650 command/init: check required_version
Previously we were checking required_version only during "real" operations, and not during initialization. Catching it during init is better because that's the first command users run on a new working directory.
2017-08-28 11:25:16 -07:00
Radek Simko aabab16069
command/init: Remove extra whitespace 2017-08-17 09:43:09 +02:00
Radek Simko 28b33c9299
plugin: Display version + source when initializing plugins 2017-08-15 19:29:13 +02:00
Martin Atkins 8a7a0a7459 command: terraform init -from-module=...
This restores the earlier behavior of the first positional argument to
terraform init in 0.9, but as a command line option.

The positional argument was removed to improve consistency with other
commands that take a working directory as their first positional argument.
It was originally intended that this functionality would return in a
later release along with some other general improvements to Terraform's
module handling, but we're introducing here an interim solution that
uses the existing module source concept, to allow for easier porting of
workflows that previously depended on the automatic copy behavior.

In a future release this feature may change again as the module
improvements design firms up, but we expect it to be broadly compatible
with this temporary state.
2017-07-28 15:23:29 -07:00
Robert Liebowitz 006744bfe0 Use all tfvars files in working directory
As a side effect, several commands that previously did not have a failure
state can now fail during meta-parameter processing.
2017-07-05 17:24:17 -07:00
Jake Champlin 9944ea6886
core: Skip provider checksum validation based on env var
Skips checksum validation if the `TF_SKIP_PROVIDER_VERIFY` environment variable is set. Undocumented variable, as the primary goal is to significantly improve the local provider development workflow.
2017-07-03 13:59:13 -04:00
Martin Atkins 40e2fbb8e9 command: init to allow plugin init without backend init
Previously init would crash if given these options:
    -backend=false -get-plugins=true

This is because the state is used as a source of provider dependency
information, and we need to instantiate the backend to get the state.

To avoid the crash, we now use the following adjusted behavior:

- if -backend=true, we behave as before

- if -backend=false, we instead try to instantiate the backend the same
  way any other command would, without modifying its configuration

- if we're able to instantiate the backend, we use it to fetch state
  for dependency resolution purposes

- if the backend is not instantiable then we assume it's not yet
  configured and proceed with a nil state, which may cause us to see an
  incomplete picture of the dependencies but still allows the install
  to succeed. Subsequently running "terraform plan" will not work until
  the backend is (re-)initialized, so the incomplete picture of required
  plugins is safe.
2017-06-21 11:43:28 -07:00
Martin Atkins 3dc7d618f7 command: avoid empty string constraints in plugin install errors
This takes care of a few dangling cases where we were still stringifying
empty version constraints, which creates confusing error messages due to
it stringing as the empty string.

For the "no suitable versions available" message, we fall back on the
"provider not found" message if no versions were found even though it's
unconstrained. This should only happen in an edge case where the
provider's index page exists on the releases server but no versions are
yet present.

For the message about plugin protocol versions, this again is an edge
case since with no constraints this should happen only if we release
an incompatible Terraform version but don't release a new version of the
plugin that's compatible. In this case we just show the constraint as
"(any version)" to make sure we always show _something_.
2017-06-21 09:18:17 -07:00
James Bardin c10f5caf05 Merge pull request #15345 from hashicorp/jbardin/plugin-sig
verify automatically downloaded plugins
2017-06-20 17:05:54 -04:00
Martin Atkins 9c2fe3456b command: purge unused plugins as a side effect of plugin installation
Previously we only did this when _upgrading_, but that's unnecessarily
specific and confusing since e.g. plugins can get upgraded implicitly by
constraint changes, which would not then trigger the purge process.

Instead, we'll assume that the user is able to easily re-download plugins
that were purged here, or if they need more specific guarantees they will
manage manually a plugin directory and disable the auto-install behavior
using `-plugin-dir`.
2017-06-20 13:40:03 -07:00
Martin Atkins d48dcbb4a5 command: more-helpful error messages from plugin installation
Now we are able to recognize and handle a few special error situations
from plugin installation with more verbose error messages that give the
user better feedback on how to proceed.
2017-06-20 13:39:45 -07:00
James Bardin 0a47228065 add -verify-plugins flag to init
This provides the user with the option to disable plugin signature
verification.
2017-06-20 13:14:31 -04:00
James Bardin da385c4268 Don't show plugin init message if there are none
Skip the message and plugin initialization if there are none in the
config.
2017-06-19 12:08:42 -04:00
James Bardin ec99b6910b remove "~> 0.0" constraint suggestions
Don't suggest constraints when the available plugin isn't versioned.

Add zero version const for comparisons.
2017-06-16 16:25:36 -04:00
James Bardin be2069ac81 add -plugin-dir option
The -plugin-dir option lets the user specify custom search paths for
plugins. This overrides all other plugin search paths, and prevents the
auto-installation of plugins.

We also make sure that the availability of plugins is always checked
during init, even if -get-plugins=false or -plugin-dir is set.
2017-06-15 15:23:16 -04:00
James Bardin 000e860706 Add plugin dir scaffolding
add pluginDir to command.Meta, the flag to initialize it, and the
methods to save and restore it.
2017-06-15 14:26:12 -04:00
James Bardin 55bf19e548 always write to dataDir in the current directory
Now that init can take a directory for configuration, the old behavior
of writing the .terraform data directory into the target path no longer
makes sense. Don't change the dataDir field during init, and write to
the default location.

Clean up all references to Meta.dataDir, and only use the getter method
in case we chose to dynamically override this at some point.
2017-06-14 15:14:26 -04:00
Martin Atkins 6979a07754 command: init -upgrade for provider plugins
Now when -upgrade is provided to "terraform init" (and plugin installation
isn't disabled) it will:

- ignore the contents of the auto-install plugin directory when deciding
  what is "available", thus causing anything there to be reinstalled,
  possibly at a newer version.
- if installation completes successfully, purge from the auto-install
  plugin directory any plugin-looking files that aren't in the set of
  chosen plugins.

As before, plugins outside of the auto-install directory are able to
take precedence over the auto-install ones, and these will never be
upgraded nor purged.

The thinking here is that the auto-install directory is an implementation
detail directly managed by Terraform, and so it's Terraform's
responsibility to automatically keep it clean as plugins are upgraded.

We don't yet have the -plugin-dir option implemented, but once it is it
should circumvent all of this behavior and just expect providers to be
already available in the given directory, meaning that nothing will be
auto-installed, -upgraded or -purged.
2017-06-13 12:28:07 -07:00
Martin Atkins f753974bb3 plugin/discovery: Installer interface, and provider implementation
Previously we had a "getProvider" function type used to implement plugin
fetching. Here we replace that with an interface type, initially with
just a "Get" function.

For now this just simplifies the interface by allowing the target
directory and protocol version to be members of the struct rather than
passed as arguments.

A later change will extend this interface to also include a method to
purge unused plugins, so that upgrading frequently doesn't leave behind
a trail of unused executable files.
2017-06-13 12:28:07 -07:00
Gavin Williams 5834333ea3 command: terraform get -upgrade
As of this commit this just upgrades modules, but this option will also
later upgrade plugins and indeed anything else that's being downloaded and
installed as part of the init.
2017-06-13 12:28:07 -07:00
James Bardin a30007b41d Merge pull request #15032 from hashicorp/jbardin/init
change init args to remove source copy
2017-06-12 09:06:32 -04:00
Martin Atkins 418a8a8bc9 command + backend: rename various API objects to "Workspace" terminology
We're shifting terminology from "environment" to "workspace". This takes
care of some of the main internal API surface that was using the old
terminology, though is not intended to be entirely comprehensive and is
mainly just to minimize the amount of confusion for maintainers as we
continue moving towards eliminating the old terminology.
2017-06-09 16:26:25 -07:00
James Bardin 2bfcdbbd08 change init args to remove source copy
When init was modified in 0.9 to initialize a terraform working
directory, the legacy behavior was kept to copy or fetch module sources.
This left the init command without the ability that the plan and apply
commands have to target a specific directory for the operation.

This commit removes the legacy behavior altogether, and allows init to
target a directory for initialization, bringing it into parity with plan
and apply. If one want to copy a module to the target or current
directory, that will have to be done manually before calling init. We
can later reintroduce fetching modules with init without breaking this
new behavior, by adding the source as an optional second argument.

The unit tests testing the copying of sources with init have been
removed, as well as some out of date (and commented out) init tests
regarding remote states.
2017-06-09 17:50:14 -04:00
James Bardin a529b64cc8 better init error output
Provide log-form message when a provider isn't found, along with the
desired constraints.
2017-06-09 14:03:59 -07:00
Martin Atkins 766f8e5d64 command init: remove confusing uses of "environment" in the usage
"environment" is a very overloaded term, so here we prefer to use the
term "working directory" to talk about a local directory where operations
are executed on a given Terraform configuration.
2017-06-09 14:03:59 -07:00
Martin Atkins 3c429b3628 command init: show log output for each provider plugin downloaded
Each provider plugin will take at least a few seconds to download, so
providing feedback about each one should make users feel less like
Terraform has hung.

Ideally we'd show ongoing progress during the download, but that's not
possible without re-working go-getter, so we'll accept this as an interim
solution for now.
2017-06-09 14:03:59 -07:00
Martin Atkins 4ba20f9c1c command init: show suggested constraints for unconstrained providers
When running "terraform init" with providers that are unconstrained, we
will now produce information to help the user update configuration to
constrain for the particular providers that were chosen, to prevent
inadvertently drifting onto a newer major release that might contain
breaking changes.

A ~> constraint is used here because pinning to a single specific version
is expected to create dependency hell when using child modules. By using
this constraint mode, which allows minor version upgrades, we avoid the
need for users to constantly adjust version constraints across many
modules, but make major version upgrades still be opt-in.

Any constraint at all in the configuration will prevent the display of
these suggestions, so users are free to use stronger or weaker constraints
if desired, ignoring the recommendation.
2017-06-09 14:03:59 -07:00
James Bardin e0f2235f66 update init command with new GetProvider signature
GetProvider needs the plugin protocol version to be passed in
2017-06-09 14:03:59 -07:00
Martin Atkins 032f71f1ff command: produce provider lock file during "terraform init"
Once we've installed the necessary plugins, we'll do one more walk of
the available plugins and record the SHA256 hashes of all of the plugins
we select in the provider lock file.

The file we write here gets read when we're building ContextOpts to
initialize the main terraform context, so any command that works with
the context will then fail if any of the provider binaries change.
2017-06-09 14:03:59 -07:00
Martin Atkins e3401947a6 plugin/discovery: PluginRequirements can specify SHA256 digests
As well as constraining plugins by version number, we also want to be
able to pin plugins to use specific executables so that we can detect
drift in available plugins between commands.

This commit allows such requirements to be specified, but doesn't yet
specify any such requirements, nor validate them.
2017-06-09 14:03:59 -07:00
James Bardin 4c32cd432a make getProvider pluggable 2017-06-09 14:03:59 -07:00
James Bardin 2749946f5c basic plugin getter
Add discovery.GetProviders to fetch plugins from the relases site.

This is an early version, with no tests, that only (probably) fetches
plugins from the default location. The URLs are still subject to change,
and since there are no plugin releases, it doesn't work at all yet.
2017-06-09 14:03:59 -07:00
James Bardin 718ede0636 have Meta.Backend use a Config rather than loading
Instead of providing the a path in BackendOpts, provide a loaded
*config.Config instead. This reduces the number of places where
configuration is loaded.
2017-06-09 14:03:59 -07:00
Edward Betts be265479a9 correct spelling mistakes (#13979) 2017-04-27 02:10:04 +12:00
James Bardin 7aa2ce8341 add -reconfigure option for init
The reconfigure flag will force init to ignore any saved backend state.
This is useful when a user does not want any backend migration to
happen, or if the saved configuration can't be loaded at all for some
reason.
2017-04-20 18:15:46 -04:00
James Bardin fb4a365d12 noop migrate copy, add -lock and -input
A couple commits got rebased together here, and it's easier to enumerate
them in a single commit.

Skip copying of states during migration if they are the same state. This
can happen when trying to reconfigure a backend's options, or if the
state was manually transferred. This can fail unexpectedly with locking
enabled.

Honor the `-input` flag for all confirmations (the new test hit some
more). Also unify where we reference the Meta.forceInitCopy and transfer
the value to the existing backendMigrateOpts.force field.
2017-04-04 14:54:48 -04:00
James Bardin 5eca913b14 add cli flags for -lock-timeout
Add the -lock-timeout flag to the appropriate commands.
Add the -lock flag to `init` and `import` which were missing it.
Set both stateLock and stateLockTimeout in Meta.flagsSet, and remove the
extra references for clarity.
2017-04-01 17:09:21 -04:00
James Bardin 54e536cfe0 add `-force-copy` option to init command
The `-force-copy` option will suppress confirmation for copying state
data.

Modify some tests to use the option, making sure to leave coverage of
the Input code path.
2017-03-22 08:47:26 -04:00
Mitchell Hashimoto df8529719c
command/init: backend-config accepts key=value pairs
This augments backend-config to also accept key=value pairs.
This should make Terraform easier to script rather than having to
generate a JSON file.

You must still specify the backend type as a minimal amount in
configurations, example:

```
terraform { backend "consul" {} }
```

This is required because Terraform needs to be able to detect the
_absense_ of that value for unsetting, if that is necessary at some
point.
2017-03-16 23:27:05 -07:00
Mitchell Hashimoto 716132431a
command/init: initialize backend even if not set in the config
We need to initialize the backend even if the config has no backend set.
This allows `init` to work when unsetting a previously set backend.
Without this, there was no way to unset a backend.
2017-02-15 15:44:53 -08:00
Mitchell Hashimoto ad7b063262
command: convert to use backends 2017-01-26 14:33:49 -08:00
James Bardin f175497dd7 Fix vet issues
None were critical, but these will fail with the next version of vet.
2016-10-18 11:11:12 -04:00
James Nugent 681d94ae20 core: Allow lists and maps as variable overrides
Terraform 0.7 introduces lists and maps as first-class values for
variables, in addition to string values which were previously available.
However, there was previously no way to override the default value of a
list or map, and the functionality for overriding specific map keys was
broken.

Using the environment variable method for setting variable values, there
was previously no way to give a variable a value of a list or map. These
now support HCL for individual values - specifying:

    TF_VAR_test='["Hello", "World"]'

will set the variable `test` to a two-element list containing "Hello"
and "World". Specifying

    TF_VAR_test_map='{"Hello = "World", "Foo" = "bar"}'

will set the variable `test_map` to a two-element map with keys "Hello"
and "Foo", and values "World" and "bar" respectively.

The same logic is applied to `-var` flags, and the file parsed by
`-var-files` ("autoVariables").

Note that care must be taken to not run into shell expansion for `-var-`
flags and environment variables.

We also merge map keys where appropriate. The override syntax has
changed (to be noted in CHANGELOG as a breaking change), so several
tests needed their syntax updating from the old `amis.us-east-1 =
"newValue"` style to `amis = "{ "us-east-1" = "newValue"}"` style as
defined in TF-002.

In order to continue supporting the `-var "foo=bar"` type of variable
flag (which is not valid HCL), a special case error is checked after HCL
parsing fails, and the old code path runs instead.
2016-07-26 15:27:29 -05:00
David Glasser 50959a654c command: Remove second DefaultDataDirectory const (#7666) 2016-07-20 23:55:05 +01:00
Justin Nauman 61240b4250 Fixes #5011 - Backend downcased for init 2016-02-05 06:26:12 -06:00
Mitchell Hashimoto 6a972a7713 command/init: put remote state config at proper path [GH-2927] 2016-01-19 17:13:19 -08:00
Mitchell Hashimoto 344e7c26b5 fix a bunch of tests from go-getter import 2015-10-15 13:48:58 -07:00
Radek Simko b7d41d2eed Add -no-color to help text 2015-06-22 13:14:01 +01:00
Mitchell Hashimoto 01cd761023 command: move remote configuration stuff 2015-03-04 16:17:30 -08:00
Mitchell Hashimoto a655c1619a command: update help text 2015-02-23 15:13:56 -08:00
Mitchell Hashimoto 0299e60e83 command/init: -backend-config 2015-02-23 15:13:56 -08:00
Mitchell Hashimoto 622690583c command/init: remove dependency on remote package 2015-02-23 15:13:55 -08:00
Armon Dadgar 6a84be0686 command: updating for pluggable backends 2014-12-10 13:27:10 -08:00
Armon Dadgar 6e7cffd60b command/init: Only initialize a blank state with remote 2014-12-10 13:27:08 -08:00
Armon Dadgar d332b8ad58 remote: implement refresh state 2014-12-10 13:27:07 -08:00
Armon Dadgar 29b3310a49 command/init: integrate remote state storage 2014-12-10 13:27:06 -08:00
Mitchell Hashimoto f4cc2c066f command: init works at a basic level 2014-09-26 16:30:49 -07:00
Mitchell Hashimoto 615192a6c4 command: init command start 2014-09-26 16:04:10 -07:00