Commit Graph

7901 Commits

Author SHA1 Message Date
James Bardin 0f883b118a test that computed maps are applied correctly
Verify that a computed map which is not correctly marked as unknown in
the plan is still applied correctly.
2019-04-23 12:31:19 -04:00
James Bardin 67395306e1 delete unknown values from apply config altogether
removeConfigUnknowns need to remove the value completely from the config
map. Removing this value allows GetOk and GetOkExists to indicate if the
value was set in the config in the case of an Optional+Computed
attribute.
2019-04-22 18:06:26 -04:00
Martin Atkins 861a2ebf26 helper/schema: Use a more targeted shim for nested set diff applying
We previously attempted to make the special diff apply behavior for nested
sets of objects work with attribute mode by totally discarding attribute
mode for all shims.

In practice, that is too broad a solution: there are lots of other shimming
behaviors that we _don't_ want when attribute mode is enabled. In
particular, we need to make sure that the difference between null and
empty can be seen in configuration.

As a compromise then, we will give all of the shims access to the real
ConfigMode and then do a more specialized fixup within the diff-apply
logic: we'll construct a synthetic nested block schema and then use that
to run our existing logic to deal with nested sets of objects, while
using the previous behavior in all other cases.

In effect, this means that the special new behavior only applies when the
provider uses the opt-in ConfigMode setting on a particular attribute,
and thus this change has much less risk of causing broad, unintended
regressions elsewhere.
2019-04-17 07:47:31 -07:00
Martin Atkins ff2de9c818 core: Keep old value on error even for delete
When an operation fails, providers may return a null new value rather than
returning a partial state. In that case, we'd prefer to keep the old value
so that we stand the best chance of being able to retry on a subsequent
run.

Previously we were making an exception for the delete action, allowing
the result of that to be null even when an error is returned. In practice
that was a bad idea because it would cause Terraform to lose track of the
object even though it might not actually have been deleted.

Now we'll retain the old object even in the delete case. Providers can
still return partial new objects if they were able to partially complete
a delete operation, in which case we'll discard what we had before, but
if the result is null with errors then we'll assume the delete failed
entirely and so just keep the old state as-is, giving us the opportunity
to refresh it on the next run to see if anything actually happened after
all.

(This also includes a new resource in the test provider which isn't used
by the patch but was useful for some manual UX testing here, so I thought
I'd include it in case it's similarly useful in future, given how simple
its implementation is.)
2019-04-17 07:40:15 -07:00
Martin Atkins bd1a215580 helper/resource: Ignore Removed attributes for ImportStateVerify
Due to the lossiness of our legacy models for diff and state, shimming a
diff and then creating a state from it produces a different result than
shimming a state directly. That means that ImportStateVerify no longer
works as expected if there are any Computed attributes in the schema where
d.Set isn't called during Read.

Fixing that for every case would require some risky changes to the shim
behavior, so we're instead going to ask provider developers to address it
by adding `d.Set` calls where needed, since that is the contract for
"Computed" anyway -- a default value should be produced during Create, and
thus by extension during Import.

However, since a common situation where this occurs is attributes marked
as "Removed", since all of the code that deals with them has generally
been deleted, we'll avoid problems in that case here by treating Removed
attributes as ignored for the purposes of ImportStateVerify.

This required exporting some functionality that was formerly unexported
in helper/schema, but it's a relatively harmless schema introspection
function so shouldn't be a big deal to export it.
2019-04-16 11:14:49 -07:00
James Bardin 8d32229f7d add test fetching computed set value by address
This is not a recommended method, but it does serve to verify that the
set values in the ResourceData internal state are correctly computed,
which indicates that the expected configuration was passed in.
2019-04-10 09:42:54 -04:00
James Bardin a3d58665ad use LegacyResourceSchema
rather than the previous .CoreConfigSchemaForShimming
2019-04-08 16:45:35 -04:00
James Bardin 1a9c06d0f5 Revert "helper/schema: Implementation of the AsSingle mechanism"
This reverts commit 1987a92386.
2019-04-08 16:45:35 -04:00
James Bardin af9dacb9f9 add failing test for diff.Apply
Add a diff test using a shcema with ConfigModeAttr.

It's in the test provider, because that is what is mostly responsible
for exercising diff.Apply, and where the other tests are.
2019-04-08 16:45:06 -04:00
James Bardin f52a6630f5 create a downstream failure from a computed value
These are the largest source of the old "diffs didn't match after apply"
errors. It's almost always an upstream dependency that caused the final
error.
2019-04-03 17:36:08 -04:00
James Bardin 8b9fa6d05f add test provider coverage around unknown vals 2019-03-29 13:56:42 -04:00
Martin Atkins 87786484ea lang/eval: Apply attr-as-nested-block fixup in EvalBlock
For any block content we evaluate dynamically via this API, we'll make a
special allowance for users to optionally write members of a list
attribute instead as a sequence of nested blocks, thus allowing some
existing provider features that were assuming this capability to continue
to support it after v0.12.

This should not be used for any new provider features, and should ideally
be eventually phased out so that there aren't two
similar-but-slightly-different syntaxes for saying the same thing.
2019-03-28 10:41:01 -07:00
Martin Atkins 135121562e helper/plugin: Implement Schema.SkipCoreTypeCheck
The previous commit added this flag but did not implement it. Here we
implement it by adjusting the shape of schema we return to Terraform Core
to mark the attribute as untyped and then ensure that gets handled
correctly on the SDK side.
2019-03-21 15:19:59 -07:00
Martin Atkins 1987a92386 helper/schema: Implementation of the AsSingle mechanism
The previous commit added a new flag to schema.Schema which is documented
to make a list with MaxItems: 1 be presented to Terraform Core as a single
value instead, giving a way to switch to non-list nested resources without
it being a breaking change for Terraform v0.11 users as long as it's done
prior to a provider's first v0.12-compatible release.

This is the implementation of that mechanism. It's intentionally
implemented as a suite of extra fixups rather than direct modifications to
existing shim code because we want to ensure that this has no effect
whatsoever on the result of a resource type that _isn't_ using AsSingle.

Although there is some small unit test coverage of the fixup steps here,
the primary testing for this is in the test provider since the integration
of all of these fixup steps in the correct order is the more important
result than any of the intermediate fixup steps.
2019-03-14 15:36:15 -07:00
James Bardin 4006c0fc84 add test for set value drift
The changed value for the set attribute should be correctly read from
the provider.
2019-03-13 19:17:38 -04:00
James Bardin 6ecf9b143b we can normalize nulls in Read again
This should be the final change from removing the flatmap normalization.
Since we're no longer trying to a consistent zero or null value in the
flatmap config, rather we're trying to maintain the previously applied
value, ReadResource also needs to apply the normalizeNullValues step in
order to prevent unexpected diffs.
2019-03-12 16:00:25 -04:00
James Bardin 4c23e990e2 add test for complex schema diff apply
This schema was taken from an actual google resource which often shows
perpetual diffs.
2019-03-12 12:04:35 -04:00
Martin Atkins 4de0b33097 helper/schema: Honor ConfigMode when building core schema
This makes some slight adjustments to the shape of the schema we
present to Terraform Core without affecting how it is consumed by the
SDK and thus the provider. This mechanism is designed specifically to
avoid changing how the schema is interpreted by the SDK itself or by the
provider, so that prior behavior can be preserved in Terraform v0.11 mode.

This also includes a new rule that Computed-only (i.e. not also Optional)
schemas _always_ map to attributes, because that is a better mapping of
the intent: they are object values to be used in expressions. Nested
blocks conceptually represent nested objects that are in some sense
independent of what they are embedded in, and so they cannot themselves be
computed.
2019-03-11 17:02:05 -07:00
James Bardin 9d4bb6ec14 stop removing empty flatmap containers
As we've improved the cty.Value normalization, we need to remove
normalization procedures from the flatmap handling. Keeping the empty
containers in the flatmap will prevent unexpected nils from being added
to some schema configurations
2019-03-11 15:14:29 -04:00
James Bardin 3600f59bb7
Merge pull request #20525 from hashicorp/jbardin/extra-set-value
remove the partially-known ~ set sigil in diffs
2019-03-05 16:50:02 -05:00
James Bardin 2b4d030a69 don't re-add removed list values even when planned
Providers were not strict (and were not forced to be) about customizing
the diff when a computed attribute needed to be updated during apply.
The fix we have in place to prevent loss of information during the
helper/schema apply process would add in single missing value back in.

The first place this was caught was when we attempt to fix up the
flatmapped attributes. The 1->0 count error is now better handled by our
cty.Value normalization step, so we can remove the special apply case
here altogether

The next place is in normalizeNullValues, and since the intent was to
re-insert missing zero-value lists and sets, adding a check for a length
of 0 protects us from adding in extra elements.

The new test fixture emulated common provider behavior of re-computing
values without customizing the diff. Since we can work around it, and
core will provider appropriate warnings, the shims should try to
maintain the legacy behavior.
2019-03-05 15:31:08 -05:00
James Bardin 47604c36c8 remove the partially-known ~ set sigil in diffs
The NewExtra values are stored outside the diff from plan, and the
original keys may not contain the ~ prefix. Adding the NewExtra back
into the diff with the mismatched key was causing an entire new set
element to be populated. Since this symbol isn't used to apply the diff
in helper/schema, we can simply strip them out.
2019-03-04 17:36:30 -05:00
James Bardin c814f2da37 Change backend.ValidateConfig to PrepareConfig
This mirrors the change made for providers, so that default values can
be inserted into the config by the backend implementation. This is only
the interface and method name changes, it does not yet add any default
values.
2019-02-25 18:37:20 -05:00
Jurnell Cockhren 1242e08473 fix(salt-masterless): Compare retrieved variable values with defaults 2019-02-14 18:13:16 -08:00
Jurnell Cockhren 996f845d4b fix(salt-masterless): set the default values for state and pillar remote locations 2019-02-14 18:13:16 -08:00
James Bardin da389d6cd4 simple list diffs may also have missing elements
Like was done for list blocks, simple lists of strings may be missing
empty string elements, and any list may be implicitly truncated.
2019-02-14 13:06:04 -05:00
James Bardin 931f459336 add a trouble test schema from the aws provider 2019-02-13 19:09:46 -05:00
James Bardin f932e11a50 create a test that removes a RequiresReplace path
One of the paths that triggers RequiresReplace does not apply to the
new value.
2019-02-12 11:48:36 -05:00
James Bardin 1ca7531cc7 allow implicit empty strings in lists
The helper/schema handling of lists loses empty string values, but
retains the correct count. Only re-count the values if the count is
missing entirely, and allow our shims to re-populate the zero values.
2019-02-11 19:24:14 -05:00
James Bardin 1bfc27817e process state even after provider.Apply errors
Terraform core expects a sane state even when the provider returns an
error. Make sure at the prior state is always the default value to
return, and then alway attempt to process any state returned by
provider.Apply.
2019-02-11 15:41:07 -05:00
James Bardin be127725cc Additional tests with interpolated values 2019-02-07 20:23:39 -05:00
James Bardin 411df99f33 only force top-level id's back to unknown
Nested structures may have "id" fields, which should be treated
normally.
2019-02-05 16:16:08 -05:00
James Bardin 3b18dd7c01
Merge pull request #20224 from hashicorp/jbardin/sdk
SDK set fixes
2019-02-05 14:11:51 -05:00
James Bardin 79d1e0d7cf add failing test for multiple computed set elems 2019-02-05 12:08:17 -05:00
James Bardin 2e2374cfcb add failing test for set elements with custom diff
Adding a DiffSuppressFunc for set elements can cause them to be missed
in the set diff entirely.
2019-02-05 12:08:16 -05:00
Martin Atkins bdcac8792d plugin: Use correct schema when marshaling imported resource objects
Previously we were using the type name requested in the import to select
the schema, but a provider is free to return additional objects of other
types as part of an import result, and so it's important that we perform
schema selection separately for each returned object.

If we don't do this, we get confusing downstream errors where the
resulting object decodes to the wrong type and breaks various invariants
expected by Terraform Core.

The testResourceImportOther test in the test provider didn't catch this
previously because it happened to have an identical schema to the other
resource type being imported. Now the schema is changed and also there's
a computed attribute we can set as part of the refresh phase to make sure
we're completing the Read call properly during import. Refresh was working
correctly, but we didn't have any tests for it as part of the import flow.
2019-02-01 15:22:54 -08:00
James Bardin 89c1ba099f add computed set test with CustomizeDiff 2019-02-01 17:21:37 -05:00
James Bardin fa92e69e17 simplify test check 2019-01-30 14:55:04 -05:00
James Bardin 3b04b41250 fix RequiresNew in diff
With the new diff.Apply we can keep the diff mostly intact, but we need
turn off all RequiresNew flags so that the prior state is not removed
from the apply.
2019-01-30 14:55:04 -05:00
Martin Atkins 477da57a92 helper/plugin: Honor resource type overrides in import
One quirky aspect of our import feature is that we allow the importer to
produce additional resources alongside the one that was imported, such as
to create separate rules for each rule of an imported security group.

Providers need to be able to set the types of these other resources since
they may not match the "main" resource type. They do this by calling
ResourceData.SetType, which in turn sets InstanceState.Ephemeral.Type.

In our shims here we therefore need to copy that out into our new TypeName
field so that the new core import code can see it and create the right
type in the state.

Testing this required a minor change to the test harness to allow the
ImportStateCheck function to see the resource type.
2019-01-30 09:05:08 -08:00
James Bardin 775df57217 add more tests
verify that changes to defaults are detected
2019-01-23 20:03:10 -05:00
James Bardin 7dd0acc46b don't count empty containers in diff.Apply
If there were no matching keys, and there was no diff at all, don't set
a zero count for the container. Normally Providers can't reliably detect
empty vs unset here, but there are some cases that worked.
2019-01-23 19:34:11 -05:00
James Bardin 675d700a5f test for missing map entries 2019-01-23 17:04:17 -05:00
James Bardin 93d78c4ee7 disable broken import test for now 2019-01-22 18:10:12 -05:00
James Bardin f78b5045d0 add failing test for lost elements in list blocks
Modifying an element loses the modification, and other elements in a
TypeList.
2019-01-22 18:10:12 -05:00
James Bardin c045d3e6a3 disable known failing tests
We need these changes in master for testing, worry about these test
after.
2019-01-17 19:19:13 -05:00
James Bardin 4439a7dcf4 add tests for nested default values
Don't lose default values set within a nested block.
2019-01-17 18:51:18 -05:00
James Bardin 0d1252812b add more tests for a computed nested list and set 2019-01-15 11:55:02 -05:00
James Bardin 9b89f6ecc6 add tests for deprecated/removed attrs 2019-01-12 10:41:04 -05:00
James Bardin 3e3802c36f update existing test provider test 2019-01-10 13:08:54 -05:00