Commit Graph

26 Commits

Author SHA1 Message Date
Martin Atkins 4b3e237668 command/init: Hint about providers in other namespaces
If a user forgets to specify the source address for a provider, Terraform
will assume they meant a provider in the registry.terraform.io/hashicorp/
namespace. If that ultimately doesn't exist, we'll now try to see if
there's some other provider source address recorded in the registry's
legacy provider lookup table, and suggest it if so.

The error message here is a terse one addressed primarily to folks who are
already somewhat familiar with provider source addresses and how to
specify them. Terraform v0.13 had a more elaborate version of this error
message which directed the user to try the v0.13 automatic upgrade tool,
but we no longer have that available in v0.14 and later so the user must
make the fix themselves.
2020-12-10 10:11:27 -08:00
James Bardin 276dfe634f internal/providercache: staticcheck 2020-12-02 13:59:19 -05:00
Martin Atkins 24d32e9ca2 providercache: More exhaustive testing of the main installer
We previously had some tests for some happy paths and a few specific
failures into an empty directory with no existing locks, but we didn't
have tests for the installer respecting existing lock file entries.

This is a start on a more exhaustive set of tests for the installer,
aiming to visit as many of the possible codepaths as we can reasonably
test using this mocking strategy. (Some other codepaths require different
underlying source implementations, etc, so we'll have to visit those in
other tests separately.)
2020-10-28 07:46:45 -07:00
Martin Atkins 2611e08430 command/init: Mention using the lock file for provider selection
This probably isn't the best UI we could do here, but it's a placeholder
for now just to avoid making it seem like we're ignoring the lock file
and checking for new versions anyway.
2020-10-09 09:26:23 -07:00
Martin Atkins b3f5c7f1e6 command/init: Read, respect, and update provider dependency locks
This changes the approach used by the provider installer to remember
between runs which selections it has previously made, using the lock file
format implemented in internal/depsfile.

This means that version constraints in the configuration are considered
only for providers we've not seen before or when -upgrade mode is active.
2020-10-09 09:26:23 -07:00
Kristin Laemmert 04be220f5f deprecate helper/copy
helper/copy CopyDir was used heavily in tests. It differes from
internal/copydir in a few ways, the main one being that it creates the
dst directory while the internal version expected the dst to exist
(there are other differences, which is why I did not just switch tests
to using internal's CopyDir).

I moved the CopyDir func from helper/copy into command_test.go; I could
also have moved it into internal/copy and named it something like
CreateDirAndCopy so if that seems like a better option please let me
know.

helper/copy/CopyFile was used in a couple of spots so I moved it into
internal, at which point I thought it made more sense to rename the
package copy (instead of copydir).

There's also a `go mod tidy` included.
2020-10-08 08:42:16 -04:00
Martin Atkins 0b734a2803 command: Make provider installation interruptible
In earlier commits we started to make the installation codepath
context-aware so that it could be canceled in the event of a SIGINT, but
we didn't complete wiring that through the API of the getproviders
package.

Here we make the getproviders.Source interface methods, along with some
other functions that can make network requests, take a context.Context
argument and act appropriately if that context is cancelled.

The main providercache.Installer.EnsureProviderVersions method now also
has some context-awareness so that it can abort its work early if its
context reports any sort of error. That avoids waiting for the process
to wind through all of the remaining iterations of the various loops,
logging each request failure separately, and instead returns just
a single aggregate "canceled" error.

We can then set things up in the "terraform init" and
"terraform providers mirror" commands so that the context will be
cancelled if we get an interrupt signal, allowing provider installation
to abort early while still atomically completing any local-side effects
that may have started.
2020-09-29 10:00:35 -07:00
Martin Atkins 6694cfaa0e getproviders: Add a real type Hash for package hashes
The logic for what constitutes a valid hash and how different hash schemes
are represented was starting to get sprawled over many different files and
packages.

Consistently with other cases where we've used named types to gather the
definition of a particular string into a single place and have the Go
compiler help us use it properly, this introduces both getproviders.Hash
representing a hash value and getproviders.HashScheme representing the
idea of a particular hash scheme.

Most of this changeset is updating existing uses of primitive strings to
uses of getproviders.Hash. The new type definitions are in
internal/getproviders/hash.go.
2020-09-24 14:01:54 -07:00
Alisdair McDiarmid 3b1347ac1a providercache: Validate provider executable file
At the end of the EnsureProviderVersions process, we generate a lockfile
of the selected and installed provider versions. This includes a hash of
the unpacked provider directory.

When calculating this hash and generating the lockfile, we now also
verify that the provider directory contains a valid executable file. If
not, we return an error for this provider and trigger the installer's
HashPackageFailure event. Note that this event is not yet processed by
terraform init; that comes in the next commit.
2020-07-07 15:20:17 -04:00
Kristin Laemmert 47e657c611
internal/getproviders: decode and return any registry warnings (#25337)
* internal/getproviders: decode and return any registry warnings

The public registry may include a list of warnings in the "versions"
response for any given provider. This PR adds support for warnings from
the registry and an installer event to return those warnings to the
user.
2020-06-25 10:49:48 -04:00
Alisdair McDiarmid ef28671b34
Merge pull request #24932 from hashicorp/signing-language
Modify language for reporting signing state
2020-05-28 09:09:34 -04:00
Paddy 5127f1ef8b
command: Unmanaged providers
This adds supports for "unmanaged" providers, or providers with process
lifecycles not controlled by Terraform. These providers are assumed to
be started before Terraform is launched, and are assumed to shut
themselves down after Terraform has finished running.

To do this, we must update the go-plugin dependency to v1.3.0, which
added support for the "test mode" plugin serving that powers all this.

As a side-effect of not needing to manage the process lifecycle anymore,
Terraform also no longer needs to worry about the provider's binary, as
it won't be used for anything anymore. Because of this, we can disable
the init behavior that concerns itself with downloading that provider's
binary, checking its version, and otherwise managing the binary.

This is all managed on a per-provider basis, so managed providers that
Terraform downloads, starts, and stops can be used in the same commands
as unmanaged providers. The TF_REATTACH_PROVIDERS environment variable
is added, and is a JSON encoding of the provider's address to the
information we need to connect to it.

This change enables two benefits: first, delve and other debuggers can
now be attached to provider server processes, and Terraform can connect.
This allows for attaching debuggers to provider processes, which before
was difficult to impossible. Second, it allows the SDK test framework to
host the provider in the same process as the test driver, while running
a production Terraform binary against the provider. This allows for Go's
built-in race detector and test coverage tooling to work as expected in
provider tests.

Unmanaged providers are expected to work in the exact same way as
managed providers, with one caveat: Terraform kills provider processes
and restarts them once per graph walk, meaning multiple times during
most Terraform CLI commands. As unmanaged providers can't be killed by
Terraform, and have no visibility into graph walks, unmanaged providers
are likely to have differences in how their global mutable state behaves
when compared to managed providers. Namely, unmanaged providers are
likely to retain global state when managed providers would have reset
it. Developers relying on global state should be aware of this.
2020-05-26 17:48:57 -07:00
Paul Tyng 22ef5cc99c Modify language for reporting signing state
Be more explicit about the signing status of fetched plugins and provide documentation about the different signing options.
2020-05-26 13:14:05 -04:00
Kristin Laemmert 60321b41e8
getproviders: move protocol compatibility functions into registry client (#24846)
* internal/registry source: return error if requested provider version protocols are not supported

* getproviders: move responsibility for protocol compatibility checks into the registry client

The original implementation had the providercache checking the provider
metadata for protocol compatibility, but this is only relevant for the
registry source so it made more sense to move the logic into
getproviders.

This also addresses an issue where we were pulling the metadata for
every provider version until we found one that was supported. I've
extended the registry client to unmarshal the protocols in
`ProviderVersions` so we can filter through that list, instead of
pulling each version's metadata.
2020-05-11 13:49:12 -04:00
Kristin Laemmert cca0526705
providercache: actually break out of the loop when a matching version is found (#24823) 2020-05-01 08:49:47 -04:00
Kristin Laemmert ce03f1255f
internal/providercache: fix error message for protocol mismatch (#24818)
There was a bug in the installer trying to pass a nil error.
2020-04-30 11:12:04 -04:00
Kristin Laemmert 21b9da5a02
internal/providercache: verify that the provider protocol version is compatible (#24737)
* internal/providercache: verify that the provider protocol version is
compatible

The public registry includes a list of supported provider protocol
versions for each provider version. This change adds verification of
support and adds a specific error message pointing users to the closest
matching version.
2020-04-23 08:21:56 -04:00
Alisdair McDiarmid a5b3d497cc internal: Verify provider signatures on install
Providers installed from the registry are accompanied by a list of
checksums (the "SHA256SUMS" file), which is cryptographically signed to
allow package authentication. The process of verifying this has multiple
steps:

- First we must verify that the SHA256 hash of the package archive
  matches the expected hash. This could be done for local installations
  too, in the future.
- Next we ensure that the expected hash returned as part of the registry
  API response matches an entry in the checksum list.
- Finally we verify the cryptographic signature of the checksum list,
  using the public keys provided by the registry.

Each of these steps is implemented as a separate PackageAuthentication
type. The local archive installation mechanism uses only the archive
checksum authenticator, and the HTTP installation uses all three in the
order given.

The package authentication system now also returns a result value, which
is used by command/init to display the result of the authentication
process.

There are three tiers of signature, each of which is presented
differently to the user:

- Signatures from the embedded HashiCorp public key indicate that the
  provider is officially supported by HashiCorp;
- If the signing key is not from HashiCorp, it may have an associated
  trust signature, which indicates that the provider is from one of
  HashiCorp's trusted partners;
- Otherwise, if the signature is valid, this is a community provider.
2020-04-17 13:57:19 -04:00
Martin Atkins 958ea4f7d1 internal/providercache: Handle built-in providers
Built-in providers are special providers that are distributed as part of
Terraform CLI itself, rather than being installed separately. They always
live in the terraform.io/builtin/... namespace so it's easier to see that
they are special, and currently there is only one built-in provider named
"terraform".

Previous commits established the addressing scheme for built-in providers.
This commit makes the installer aware of them to the extent that it knows
not to try to install them the usual way and it's able to report an error
if the user requests a built-in provider that doesn't exist or tries to
impose a particular version constraint for a built-in provider.

For the moment the tests for this are the ones in the "command" package
because that's where the existing testing infrastructure for this
functionality lives. A later commit should add some more focused unit
tests here in the internal/providercache package, too.
2020-04-06 09:24:23 -07:00
Martin Atkins f35ebe2d65 internal/providercache: Fix incorrect logic in Installer.SetGlobalCacheDir
Due to some incomplete rework of this function in an earlier commit, the
safety check for using the same directory as both the target and the
cache was inverted and was raising an error _unless_ they matched, rather
than _if_ they matched.

This change is verified by the e2etest TestInitProviders_pluginCache,
which is also updated to use the new-style cache directory layout as part
of this commit.
2020-04-06 09:24:23 -07:00
Martin Atkins ae080481c0 internal/providercache: Installer records its selections in a file
Just as with the old installer mechanism, our goal is that explicit
provider installation is the only way that new provider versions can be
selected.

To achieve that, we conclude each call to EnsureProviderVersions by
writing a selections lock file into the target directory. A later caller
can then recall the selections from that file by calling SelectedPackages,
which both ensures that it selects the same set of versions and also
verifies that the checksums recorded by the installer still match.

This new selections.json file has a different layout than our old
plugins.json lock file. Not only does it use a different hashing algorithm
than before, we also record explicitly which version of each provider
was selected. In the old model, we'd repeat normal discovery when
reloading the lock file and then fail with a confusing error message if
discovery happened to select a different version, but now we'll be able
to distinguish between a package that's gone missing since installation
(which could previously have then selected a different available version)
from a package that has been modified.
2020-04-06 09:24:23 -07:00
Martin Atkins 4061cbed38 internal/getproviders: A new shared model for provider requirements
We've been using the models from the "moduledeps" package to represent our
provider dependencies everywhere since the idea of provider dependencies
was introduced in Terraform 0.10, but that model is not convenient to use
for any use-case other than the "terraform providers" command that needs
individual-module-level detail.

To make things easier for new codepaths working with the new-style
provider installer, here we introduce a new model type
getproviders.Requirements which is based on the type the new installer was
already taking as its input. We have new methods in the states, configs,
and earlyconfig packages to produce values of this type, and a helper
to merge Requirements together so we can combine config-derived and
state-derived requirements together during installation.

The advantage of this new model over the moduledeps one is that all of
recursive module walking is done up front and we produce a simple, flat
structure that is more convenient for the main use-cases of selecting
providers for installation and then finding providers in the local cache
to use them for other operations.

This new model is _not_ suitable for implementing "terraform providers"
because it does not retain module-specific requirement details. Therefore
we will likely keep using moduledeps for "terraform providers" for now,
and then possibly at a later time consider specializing the moduledeps
logic for only what "terraform providers" needs, because it seems to be
the only use-case that needs to retain that level of detail.
2020-03-27 09:01:32 -07:00
Martin Atkins 807267d1b5 internal/providercache: Installation from HTTP URLs and local archives
When a provider source produces an HTTP URL location we'll expect it to
resolve to a zip file, which we'll first download to a temporary
directory and then treat it like a local archive.

When a provider source produces a local archive path we'll expect it to
be a zip file and extract it into the target directory.

This does not yet include an implementation of installing from an
already-unpacked local directory. That will follow in a subsequent commit,
likely following a similar principle as in Dir.LinkFromOtherCache.
2020-03-25 11:29:48 -07:00
Martin Atkins 754b7ebb65 command: Expose providercache package objects for use elsewhere
These new functions allow command implementations to get hold of the
providercache objects and installation source object derived from the
current CLI configuration.
2020-03-25 11:29:48 -07:00
Martin Atkins 18dd0a396d internal/providercache: First pass of the actual install process
This is not tested yet, but it's a compilable strawman implementation of
the necessary sequence of events to coordinate all of the moving parts
of running a provider installation operation.

This will inevitably see more iteration in later commits as we complete
the surrounding parts and wire it up to be used by "terraform init". So
far, it's just dead code not called by any other package.
2020-03-25 11:29:48 -07:00
Martin Atkins 03155daf98 internal/providercache: Start to stub Installer type
The Installer type will encapsulate the logic for running an entire
provider installation request: given a set of providers to install, it
will determine a method to obtain each of them (or detect that they are
already installed) and then take the necessary actions.

So far it doesn't do anything, but this stubs out an interface by which
the caller can request ongoing notifications during an installation
operation.
2020-03-25 11:29:48 -07:00