Commit Graph

27 Commits

Author SHA1 Message Date
James Bardin e13eecbc5b finish provider ModuleInstance replacement 2020-03-11 14:19:52 -04:00
James Bardin 10d926904f state mv should always target instance each mode
When doing a state mv of an instance, the resulting each mode should
always be taken from the target address.
2020-03-02 14:45:03 -05:00
Kristin Laemmert 47a16b0937
addrs: embed Provider in AbsProviderConfig instead of Type
a large refactor to addrs.AbsProviderConfig, embedding the addrs.Provider instead of a Type string. I've added and updated tests, added some Legacy functions to support older state formats and shims, and added a normalization step when reading v4 (current) state files (not the added tests under states/statefile/roundtrip which work with both current and legacy-style AbsProviderConfig strings).

The remaining 'fixme' and 'todo' comments are mostly going to be addressed in a subsequent PR and involve looking up a given local provider config's FQN. This is fine for now as we are only working with default assumption.
2020-02-13 15:32:58 -05:00
Martin Atkins 8b511524d6
Initial steps towards AbsProviderConfig/LocalProviderConfig separation (#23978)
* Introduce "Local" terminology for non-absolute provider config addresses

In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.

This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.

In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
  package, including removing addrs.NewLegacyProvider and
  addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
  in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
  work with addrs.Provider to identify providers, rather than legacy
  strings.

In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.

* addrs: ProviderConfig interface

In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.

We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.

In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.

This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.

* rename LocalType to LocalName

Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
2020-01-31 08:23:07 -05:00
Kristin Laemmert 6541775ce4
addrs: roll back change to Type field in ProviderConfig (#23937) 2020-01-28 08:13:30 -05:00
James Bardin 98c02ac114 remove stale dependencies on `state mv`
Clear any Dependencies if there is an entry matching a `state mv` from
address. While stale dependencies won't directly effect any current
operations, clearing the list will allow them to be recreated in their
entirety during refresh. This will help future releases that may rely
solely on the pre-calculated dependencies for destruction ordering.
2020-01-06 15:06:41 -05:00
James Bardin 96d1e57191 fix type in state mv test 2019-12-06 10:52:14 -05:00
Kristin Laemmert e3416124cc
addrs: replace "Type string" with "Type Provider" in ProviderConfig
* huge change to weave new addrs.Provider into addrs.ProviderConfig
* terraform: do not include an empty string in the returned Providers /
Provisioners
- Fixed a minor bug where results included an extra empty string
2019-12-06 08:00:18 -05:00
James Bardin a5cb36b34c Allow moving instances to new resources
If a state mv target happens to be a resource that doesn't exist, allow
the creation of the new resource inferring the EachMode from the target
address.
2019-12-05 17:38:52 -05:00
James Bardin 32f7f58345 allow moving resource to new modules not in state
Create the missing modules in the state when moving resources to a
module that doesn't yet exist. This allows for refactoring of
configuration into new modules, without having to create dummy resources
in the module before the "state mv" operations.
2019-08-01 18:54:09 -04:00
Martin Atkins c39905e1a8 command: Fix various issues in the "terraform state ..." subcommands
In earlier refactoring we updated these commands to support the new
address and state types, but attempted to partially retain the old-style
"StateFilter" abstraction that originally lived in the Terraform package,
even though that was no longer being used for any other functionality.

Unfortunately the adaptation of the existing filtering to the new types
wasn't exact and so these commands ended up having a few bugs that were
not covered by the existing tests.

Since the old StateFilter behavior was the source of various misbehavior
anyway, here it's removed altogether and replaced with some simpler
functions in the state_meta.go file that are tailored to the use-cases of
these sub-commands.

As well as just generally behaving more consistently with the other
parts of Terraform that use the new resource address types, this commit
fixes the following bugs:

- A resource address of aws_instance.foo would previously match an
  resource of that type and name in any module, which disagreed with the
  expected interpretation elsewhere of meaning a single resource in the
  root module.

- The "terraform state mv" command was not supporting moves from a single
  resource address to an indexed address and vice-versa, because the old
  logic didn't need to make that distinction while they are two separate
  address types in the new logic. Now we allow resources that do not have
  count/for_each to be treated as if they are instances for the purposes
  of this command, which is a better match for likely user intent and for
  the old behavior.

Finally, we also clean up a little some of the usage output from these
commands, which hasn't been updated for some time and so had both some
stale information and some inaccurate terminology.
2019-03-18 09:19:55 -07:00
Sander van Harmelen 7ec3f96e3a command/state: update and fix the state mv command 2018-10-27 15:01:07 +02:00
Martin Atkins 43d5206d82 command: Stub the "terraform state mv" tests to remind to fix
This command isn't yet updated for the new state types, but since we were
not returning a non-successful error status here the tests were just
failing in a weird way instead. Now we'll fail with a message that makes
it clear there is still work to do in the real implementation here.
2018-10-16 19:14:11 -07:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
James Bardin 51547ad2ba add tests for state commands through a backend 2017-07-27 18:06:47 -04:00
James Bardin 33ba6774e0 Make the state commands use the real command.Meta
In order to use a backend for the state commands, we need an initialized
meta. Use a single Meta instance rather than temporary ones to make sure
the backends are initialized properly.
2017-07-27 15:33:50 -04:00
James Bardin 6e7baaaeff don't load the backend when -state is provided
When using a `state` command, if the `-state` flag is provided we do not
want to modify the Backend state. In this case we should always create a
local state instance.

The backup flag was also being ignored, and some tests were relying on
that, which have been fixed.
2017-06-23 14:41:49 -04:00
James Bardin 5f939b42fe test that `state mv -state` doesn't use Backend
If we provide a -state flag to a state command, we do not want terraform
to modify the backend state. This test fails since the state specified
in the backend doesn't exist
2017-06-23 14:39:37 -04:00
Martin Atkins 8364383c35 Push plugin discovery down into command package
Previously we did plugin discovery in the main package, but as we move
towards versioned plugins we need more information available in order to
resolve plugins, so we move this responsibility into the command package
itself.

For the moment this is just preserving the existing behavior as long as
there are only internal and unversioned plugins present. This is the
final state for provisioners in 0.10, since we don't want to support
versioned provisioners yet. For providers this is just a checkpoint along
the way, since further work is required to apply version constraints from
configuration and support additional plugin search directories.

The automatic plugin discovery behavior is not desirable for tests because
we want to mock the plugins there, so we add a new backdoor for the tests
to use to skip the plugin discovery and just provide their own mock
implementations. Most of this diff is thus noisy rework of the tests to
use this new mechanism.
2017-06-09 14:03:59 -07:00
James Bardin 43c7bd648c fix sorting of module resources during state mv
Module resource were being sorted lexically by name by the state filter.
If there are 10 or more resources, the order won't match the index
order, and resources will have different indexes in their new location.

Sort the FilterResults by index numerically when the names match.

Clean up the module String output for visual inspection by sorting
Resource name parts numerically when they are an integer value.
2017-02-23 18:27:16 -05:00
Mitchell Hashimoto e4d2193ed6
command/state: mv and rm -backup works
Fixes #12154

The "-backup" flag before for "state *" CLI had some REALLY bizarre behavior:
it would change the _destination_ state and actually not create any
additional backup at all (the original state was unchanged and the
normal timestamped backup still are written). Really weird.

This PR makes the -backup flag work as you'd expect with one caveat:
we'll _still_ create the timestamped backup file. The timestamped backup
file helps make sure that you always get a backup history when using
these commands. We don't want to make it easy for you to overwrite a
state with the `-backup` flag.
2017-02-21 21:10:03 -08:00
Mitchell Hashimoto 0d1ea84d39
command: test for moving resource with count [GH-7797] 2016-08-19 12:05:20 -04:00
Mitchell Hashimoto 3b3f92cd9b
terraform: fix some test failures on state add with multiple modules 2016-08-18 17:39:07 -04:00
Mitchell Hashimoto a44c8b8760
terraform: state mv tests 2016-08-18 15:05:42 -04:00
Mitchell Hashimoto 32d0d29b56
command: test for moving into another state file 2016-05-10 13:25:04 -07:00
Mitchell Hashimoto 235e860118
command/state mv: handle -state-out to a different path 2016-05-10 13:25:04 -07:00
Mitchell Hashimoto c4e5355a02
command/state mv 2016-05-10 13:25:03 -07:00