Most of this is just updates to allow for the fact that we now always save
the provider address as part of resource state, whereas before it was only
saved conditionally.
This also updates TestTaint_module for the intentional change that it now
expects a child module to be specified using normal resource address
syntax, rather than as a separate -module option.
Added a very simple test with state and schema.
TODO: if tests are added we should test using golden files (and example
state files, instead of strings). This seemed unnecessary with the
simple test cases.
In previous work we didn't quite connect these dots. The connection here
is sub-awesome since the existing interfaces here had some unfortunate
assumptions that we'd like to move away from (like the idea of a "nil
backend" implying the local backend) but we're accepting this for now to
avoid another big round of refactoring.
The main implication of this is that we will now always include a backend
configuration in the plan, though it might just be a placeholder config
for the local backend in the remaining cases where that's still implicitly
set. Later we will change this so that there is no implicit local backend
at all (terraform init is always required, _it_ will deal with setting
implicitly setting the local backend when appropriate), which will allow
us to rework this to be more straightforward and less "spooky".
If we don't do this, we can't produce any output when applying a saved
plan file.
Here we also introduce a check to the local backend's ReportResult
function so that it won't panic if CLI init is skipped, although that
will no longer happen in the apply-from-file case due to the change
described in the previous paragraph.
It must now provide a basic implementation of plan and apply for its
mock provider, which in this case can just pass through the proposed value
generated by core because there are no computed attributes in this schema.
Previously we used a single plan action "Replace" to represent both the
destroy-before-create and the create-before-destroy variants of replacing.
However, this forces the apply graph builder to jump through a lot of
hoops to figure out which nodes need it forced on and rebuild parts of
the graph to represent that.
If we instead decide between these two cases at plan time, the actual
determination of it is more straightforward because each resource is
represented by only one node in the plan graph, and then we can ensure
we put the right nodes in the graph during DiffTransformer and thus avoid
the logic for dealing with deposed instances being spread across various
different transformers and node types.
As a nice side-effect, this also allows us to show the difference between
destroy-then-create and create-then-destroy in the rendered diff in the
CLI, although this change doesn't fully implement that yet.
For PreApply hook purposes we only actually use the Delete, Create, and
Update actions, because other actions are handled in different ways than
a direct call to ApplyResourceChange.
However, if there's a bug in core that causes it to pass a different
action, it's better for us to mark it as being explicitly unknown in the
UI rather than simply defaulting to "Modifying...", which can thus obscure
the problem and make for a confusing result.
We'll now show an "update" symbol prior to the argument to this synthetic
jsonencode(...) call, for consistency with how we show nested values in
other cases and to attach a verb to any "# forces replacement".
We'll also show a special form in the case where the value seems to differ
only in whitespace, so users can understand what's going on in that
hopefully-rare situation, particularly if those whitespace-only changes
end up forcing us to replace a remote object.
Since our own syntax for primitive values is similar to that of JSON, and
since we permit automatic conversions from number and bool to string, we
must do this special JSON value diff formatting only if the value is a
JSON array or object to avoid confusing results.
Because so far we've not supported dynamically-typed complex data
structures, several providers have used strings containing JSON to stand
in for these.
In order to get a readable diff in those cases, we'll recognize situations
where old and new are both JSON and present a diff of the effective value
of the JSON, using a faux call to the jsonencode(...) function to indicate
when we've done so.
This is a bit of a "cute" heuristic, but is important at least for now
until we can migrate away from that practice of passing large JSON strings
to providers and use dynamically-typed attributes instead.
This extra comment line gives us a place to show the full resource address
(since the block header line only includes type and name) and also allows
us to explain in long form the meaning of the change icon on the following
line.
This is a light adaptation of our earlier prototype of structural diff
rendering, as a starting point for what we'll actually ship. This is not
consistent with the latest mocks, so will need some additional work before
it is ready, but integrating this allows us to at least see the plan
contents while fixing up remaining issues elsewhere.
Previously we just left these out of the plan altogether, but in the new
plan types we intentionally include change information for every resource
instance, even if no changes are actually planned, to allow alternative
plan file viewers to show what isn't changing as well as what is.
This codepath is going to be significantly changed before release to make
it support structural diff of the new data types, but this lets us lean on
the old renderer to produce partial output in the mean time while we
continue to work on getting things working end-to-end after the
considerable refactoring that's been going on.
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.
The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.
The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.
Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
The "config" package is no longer used and will be removed as part
of the 0.12 release cleanup. Since configschema is part of the
"new world" of configuration modelling, it makes more sense for
it to live as a subdirectory of the newer "configs" package.
In order to properly migrate the contents of resource, data, provider and
provisioner blocks we will need the provider's schema in order to
understand what is expected, so we can resolve some ambiguities inherent
in the legacy HCL AST.
This includes an initial prototype of migrating the content of resource
blocks just to verify that the information is being gathered correctly.
As with the rest of the upgrade_native.go file, this will be reorganized
significantly once the basic end-to-end flow is established and we can
see how to organize this code better.
Since the intent of the validate command is to check config validity
regardless of context (input variables, state, etc), we use unknown values
of the requested type here, which will then allow us to complete type
checking against the specified types of the variables without assuming
any particular values.
This is the frontend to the work-in-progress codepath for upgrading the
source code for a module written for Terraform v0.11 or earlier to use
the new syntax and idiom of v0.12.
The underlying upgrade code is not yet complete as of this commit, and
so the command is not yet very useful. We will continue to iterate on
the upgrade code in subsequent commits.
Because we gather together diagnostics from many different parts of the
codebase, the list often ends up being in a non-ideal order. Here we
define a partial ordering for diagnostics that should hopefully make them
easier to scan when many are present, by grouping together diagnostics
that are of the same severity and belong to the same file.
We use sort.Stable here because we have a partial order and so we need
to make sure that diagnostics that do not have a relative ordering will
remain in their original order.
This sorting is applied just in time before rendering the diagnostics
in command.Meta.showDiagnostics.
This doesn't yet include test updates, since there are problems in core
currently blocking these tests from running. The tests will therefore be
updated in a subsequent commit.
Previously we were defaulting the provider configuration selection to a
provider in the root module inferred from the resource type name.
This is close, but not quite right: we need to _start_ with a provider
configuration in the same module as we're importing into, and then our
provider resolution steps during import graph construction will use that
as a starting point for a walk up the tree to find the nearest matching
configuration (which might eventually still be in the root, but not
necessarily).
This now uses the HCL2 parser and evaluator APIs and evaluates in terms
of a new-style *lang.Scope, rather than the old terraform.Interpolator
type that is no longer functional.
The Context.Eval method used here behaves differently than the
Context.Interpolater method used previously: it performs a graph walk
to populate transient values such as input variables, local values, and
output values, and produces its scope in terms of the result of that
graph walk. Because of this, it is a lot more robust than the prior method
when asked to resolve references other than those that are persisted
in the state.
Previously an empty diagnostics would appear as "null" in the JSON output,
since that is how encoding/json serializes a nil slice. It's more
convenient for users of dynamic languages to keep the type consistent
in all cases, since they can then just iterate the list without needing a
special case for when it is null.
Due to how deeply the configuration types go into Terraform Core, there
isn't a great way to switch out to HCL2 gradually. As a consequence, this
huge commit gets us from the old state to a _compilable_ new state, but
does not yet attempt to fix any tests and has a number of known missing
parts and bugs. We will continue to iterate on this in forthcoming
commits, heading back towards passing tests and making Terraform
fully-functional again.
The three main goals here are:
- Use the configuration models from the "configs" package instead of the
older models in the "config" package, which is now deprecated and
preserved only to help us write our migration tool.
- Do expression inspection and evaluation using the functionality of the
new "lang" package, instead of the Interpolator type and related
functionality in the main "terraform" package.
- Represent addresses of various objects using types in the addrs package,
rather than hand-constructed strings. This is not critical to support
the above, but was a big help during the implementation of these other
points since it made it much more explicit what kind of address is
expected in each context.
Since our new packages are built to accommodate some future planned
features that are not yet implemented (e.g. the "for_each" argument on
resources, "count"/"for_each" on modules), and since there's still a fair
amount of functionality still using old-style APIs, there is a moderate
amount of shimming here to connect new assumptions with old, hopefully in
a way that makes it easier to find and eliminate these shims later.
I apologize in advance to the person who inevitably just found this huge
commit while spelunking through the commit history.
For the moment this is just a lightly-adapted copy of
ModuleTreeDependencies named ConfigTreeDependencies, with the goal that
the two can live concurrently for the moment while not all callers are yet
updated and then we can drop ModuleTreeDependencies and its helper
functions altogether in a later commit.
This can then be used to make "terraform init" and "terraform providers"
work properly with the HCL2-powered configuration loader.
This is a rather-messy, complex change to get the "command" package
building again against the new backend API that was updated for
the new configuration loader.
A lot of this is mechanical rewriting to the new API, but
meta_config.go and meta_backend.go in particular saw some major
changes to interface with the new loader APIs and to deal with
the change in order of steps in the backend API.
The new config loader requires some steps to happen in a different
order, particularly in regard to knowing the schema in order to
decode the configuration.
Here we lean directly on the configschema package, rather than
on helper/schema.Backend as before, because it's generally
sufficient for our needs here and this prepares us for the
helper/schema package later moving out into its own repository
to seed a "plugin SDK".
The remote API this talks to will be going away very soon, before our next
major release, and so we'll remove the command altogether in that release.
This also removes the "encodeHCL" function, which was used only for
adding a .tfvars-formatted file to the uploaded archive.
In the long run we'd like to offer machine-readable output for more
commands, but for now we'll just start with a tactical feature in
"terraform validate" since this is useful for automated testing scenarios,
editor integrations, etc, and doesn't include any representations of types
that are expected to have breaking changes in the near future.
As part of some light reorganization of our commands, this new
implementation no longer does validation of variables and will thus avoid
the need to spin up a fully-valid context. Instead, its focus is on
validating the configuration itself, regardless of any variables, state,
etc.
This change anticipates us later adding a -validate-only flag to
"terraform plan" which will then take over the related use-case of
checking if a particular execution of Terraform is valid, _including_ the
state, variables, etc.
Although leaving variables out of validate feels pretty arbitrary today
while all of the variable sources are local anyway, we have plans to
allow per-workspace variables to be stored in the backend in future and
at that point it will no longer be possible to fully validate variables
without accessing the backend. The "terraform plan" command explicitly
requires access to the backend, while "terraform validate" is now
explicitly for local-only validation of a single module.
In a future commit this will be extended to do basic type checking of
the configuration based on provider schemas, etc.
We need to share a single config loader across all callers because that
allows us to maintain the source code cache we'll use for snippets in
error messages.
Nothing calls this yet. Callers will be gradually updated away from Module
and Config in subsequent commits.
If we get a diagnostic message that references a source range, and if the
source code for the referenced file is available, we'll show a snippet of
the source code with the source range highlighted.
At the moment we have no cache of source code, so in practice this
codepath can never be visited. Callers to format.Diagnostic will be
gradually updated in subsequent commits.
In some cases this is needed to keep the UX clean and to make sure any remote exit codes are passed through to the local process.
The most obvious example for this is when using the "remote" backend. This backend runs Terraform remotely and stream the output back to the local terminal.
When an error occurs during the remote execution, all the needed error information will already be in the streamed output. So if we then return an error ourselves, users will get the same errors twice.
By allowing the backend to specify the correct exit code, the UX remains the same while preserving the correct exit codes.
Certain backends (currently only the `remote` backend) do not support using both the default and named workspaces at the same time.
To make the migration easier for users that currently use both types of workspaces, this commit adds logic to ask the user for a new workspace name during the migration process.
This commit fixes a bug that (in the case of the `local` backend) would only check if the selected workspace had a state when deciding to preform a migration.
When the selected workspace didn’t have a state (but other existing workspace(s) did), the migration would not be preformed and the other workspaces would be ignored.
By adding this method you now only have to pass a `*disco.Disco` object around in order to do discovery and use any configured credentials for the discovered hosts.
Of course you can also still pass around both a `*disco.Disco` and a `auth.CredentialsSource` object if there is a need or a reason for that!
- Fixes#11696
- This changes makes `terraform output -json` return '{}' instead of
throwing an error about "no outputs defined"
- If `-json` is not set, the user will receive an error as before
- This UX helps new users to understand how outputs are used
- Allows for easier automation of TF CLI as an empty set of outputs is
usually acceptable, but any other error from `output` would be
re-raised to the user.
Rather than try to modify all the hundreds of calls to the temp helper
functions, and cleanup the temp files at every call site, have all tests
work within a single temp directory that is removed at the end of
TestMain.
The state locking improvements for the regular command had the side
effect of locking the state in the console, import, graph and push
commands. Those commands had been updated to get a state via the
Backend.Context method, which locks the state whenever possible, and now
need to call Unlock directly.
Add Unlock calls to all commands that call Context directly.
Use the new StateLocker field to provide a wrapper for locking the state
during terraform.Context creation in the commands that directly
manipulate the state.
Simplify the use of clistate.Lock by creating a clistate.Locker
instance, which stores the context of locking a state, to allow unlock
to be called without knowledge of how the state was locked.
This alows the backend code to bring the needed UI methods to the point
where the state is locked, and still unlock the state from an outer
scope.
Provide a NoopLocker as well, so that callers can always call Unlock
without verifying the status of the lock.
Add the StateLocker field to the backend.Operation, so that the state
lock can be carried between the different function scopes of the backend
code. This will allow the backend context to lock the state before it's
read, while allowing the different operations to unlock the state when
they complete.
Use the new StateLocker field to provide a wrapper for locking the state
during terraform.Context creation in the commands that directly
manipulate the state.
Simplify the use of clistate.Lock by creating a clistate.Locker
instance, which stores the context of locking a state, to allow unlock
to be called without knowledge of how the state was locked.
This alows the backend code to bring the needed UI methods to the point
where the state is locked, and still unlock the state from an outer
scope.
The error was being silently dropped before.
There is an interpolation error, because the plan is canceled before
some of the resources can be evaluated. There might be a better way to
handle this in the walk cancellation, but the behavior has not changed.
Make the plan and apply shutdown match implementation-wise
If the user wishes to interrupt the running operation, only the first
interrupt was communicated to the operation by canceling the provided
context. A second interrupt would start the shutdown process, but not
communicate this to the running operation. This order of event could
cause partial writes of state.
What would happen is that once the command returns, the plugin system
would stop the provider processes. Once the provider processes dies, all
pending Eval operations would return return with an error, and quickly
cause the operation to complete. Since the backend code didn't know that
the process was shutting down imminently, it would continue by
attempting to write out the last known state. Under the right
conditions, the process would exit part way through the writing of the
state file.
Add Stop and Cancel CancelFuncs to the RunningOperation, to allow it to
easily differentiate between the two signals. The backend will then be
able to detect a shutdown and abort more gracefully.
In order to ensure that the backend is not in the process of writing the
state out, the command will always attempt to wait for the process to
complete after cancellation.
Since an early version of Terraform, the `destroy` command has always
had the `-force` flag to allow an auto approval of the interactive
prompt. 0.11 introduced `-auto-approve` as default to `false` when using
the `apply` command.
The `-auto-approve` flag was introduced to reduce ambiguity of it's
function, but the `-force` flag was never updated for a destroy.
People often use wrappers when automating commands in Terraform, and the
inconsistency between `apply` and `destroy` means that additional logic
must be added to the wrappers to do similar functions. Both commands are
more or less able to run with similar syntax, and also heavily share
their code.
This commit updates the command in `destroy` to use the `-auto-approve` flag
making working with the Terraform CLI a more consistent experience.
We leave in `-force` in `destroy` for the time-being and flag it as
deprecated to ensure a safe switchover period.
The plan shutdown test often fail on slow CI hosts, becase the plan
completes befor the main thread can cancel it. Since attempting to make
the MockProvider concurrent proved too invasive for now, just slow the
test down a bit to help ensure Stop gets called.
To avoid breaking automation where plugin-path was assumed to be set
permanently, only remove the plugin-path record if it was explicitly set
to and empty string.
The existing prompts were worded as if backend configurations were
named, but they can only really be referenced by their type. Change the
wording to reference them as type "X backend". When migrating state,
refer to the backends as the "previously configured" and "newly
configured", since they will often have the same type.
Rather than relying on interrupting Diff, just make sure Stop was called
on the provider. The DiffFn is protected by a mutex in the mock
provider, which means that the tests can't rely on concurent calls to
diff working.
There's no point in trying to track these, they're lost after each test.
Kill them after a short delay so we don't have goroutines from every single
command test to wade through if we have a stack dump.
Only check for input twice in the meta.confirm method. This prevents an
errant newline from aborting the run while allowing Terraform to exit if
there is no input available. We don't just check for a tty, since we
still rely on being able to pipe input in for testing.
Remove the redundant confirmation loops in the migration code, and only
use the confirm method.
Make sure the init inputFalse test actually errors from missing input,
since skipping input will still fail later during provider
initialization. We need to make sure there are two different states that
aren't a noop for migration, and reset the command struct for each run.
Also verify that we don't go into an infinite loop if there is no input.
The duplicate prompts can be confusing when the user confirms that a
migration should happen and we immediately prompt a second time for the
same thing with slightly different wording. The extra hand-holding that
this provides for legacy remote states is less critical now, since it's
been 2 major release cycles since those were removed.
The init command needs to parse the state to resolve providers, but
changes to the state format can cause that to fail with difficult to
understand errors. Check the terraform version during init and provide
the same error that would be returned by plan or apply.
If users run "terraform import" in a directory with no Terraform
configuration files, it's likely that they've made a mistake either by
being in the wrong directory or forgetting to use the -config option
on the command line.
To help users find their mistake in this case, we'll now produce a
specialized error message for this situation:
Error: No Terraform configuration files
The directory /home/user/example does not contain any Terraform
configuration files (.tf or .tf.json). To specify a different
configuration directory, use the -config="..." command line option.
While here, this also converts some of the other existing messages to
diagnostics so that we can show any configuration warnings along with
the error message, and move towards the new standard error presentation.
Previously we required callers to separately call .Validate on the root
module to determine if there were any value errors, but we did that
inconsistently and would thus see crashes in some cases where later code
would try to use invalid configuration as if it were valid.
Now we run .Validate automatically after config loading, returning the
resulting diagnostics. Since we return a diagnostics here, it's possible
to return both warnings and errors.
We return the loaded module even if it's invalid, so callers are free to
ignore returned errors and try to work with the config anyway, though they
will need to be defensive against invalid configuration themselves in
that case.
As a result of this, all of the commands that load configuration now need
to use diagnostic printing to signal errors. For the moment this just
allows us to return potentially-multiple config errors/warnings in full
fidelity, but also sets us up for later when more subsystems are able
to produce rich diagnostics so we can show them all together.
Finally, this commit also removes some stale, commented-out code for the
"legacy" (pre-0.8) graph implementation, which has not been available
for some time.
Now that the local backend can be cancelled during plan and refresh, we
don't really need the testShutdownHook. Simplify the tests by just
checking for Stop being called on the provider.
Add a shutdown hook to verify that a context has been correctly
cancelled, so we can remove the sleep and stop guessing.
Add a plan version of the shutdown test as well.
There was no cancellation context for a plan, so it would always have to
run to completion as SIGINT was being swallowed.
Move the shutdown channel to the command Meta since it's used in
multiple commands.
Validation is the best time to return detailed diagnostics
to the user since we're much more likely to have source
location information, etc than we are in later operations.
This change doesn't actually add any detail to the messages
yet, but it changes the interface so that we can gradually
introduce more detailed diagnostics over time.
While here there are some minor adjustments to some of the
messages to improve their consistency with terminology we
use elsewhere.
As part of the 0.10 core/provider split we moved this provider, along with
all the others, out into its own repository.
In retrospect, the "terraform" provider doesn't really make sense to be
separated since it's just a thin wrapper around some core code anyway,
and so re-integrating it into core avoids the confusion that results when
Terraform Core and the terraform provider have inconsistent versions of
the backend code and dependencies.
There is no good reason to use a different version of the backend code
in the provider than in core, so this new "internal provider" mechanism
is stricter than the old one: it's not possible to use an external build
of this provider at all, and version constraints for it are rejected as
a result.
This provider is also run in-process rather than in a child process, since
again it's just a very thin wrapper around code that's already running
in Terraform core anyway, and so the process barrier between the two does
not create enough advantage to warrant the additional complexity.
Change "Downloading" to 'Initializing" to match the provider loading
dialog.
List each module being loaded.
If a regisry module is being downloaded, list the registry host, and the
version discovered.
Show the source string from the config that is being fetched, rather
than the go-getter url. The full source can be found in the logs for
debugging.
Add much more extensive logging
This allows the user to customize the location where Terraform stores
the files normally placed in the ".terraform" subdirectory, if e.g. the
current working directory is not writable.
In the 0.10 release we added an opt-in mode where Terraform would prompt
interactively for confirmation during apply. We made this opt-in to give
those who wrap Terraform in automation some time to update their scripts
to explicitly opt out of this behavior where appropriate.
Here we switch the default so that a "terraform apply" with no arguments
will -- if it computes a non-empty diff -- display the diff and wait for
the user to type "yes" in similar vein to the "terraform destroy" command.
This makes the commonly-used "terraform apply" a safe workflow for
interactive use, so "terraform plan" is now mainly for use in automation
where a separate planning step is used. The apply command remains
non-interactive when given an explicit plan file.
The previous behavior -- though not recommended -- can be obtained by
explicitly setting the -auto-approve option on the apply command line,
and indeed that is how all of the tests are updated here so that they can
continue to run non-interactively.
Update the command package to use the new module storage. Move the old
command output strings into the module storage itself. This could be
moved back later either by using ui callbacks, or designing a module
storage interface once we know what the final requirements will look
like.
We encourage users to share the "terraform version" output as part of
filing an issue, but previously it only printed the core Terraform version
and this left provider maintainers with no information about which
_provider_ version an issue relates to.
Here we make a best effort to show versions for providers, though we will
omit some or all of them if either "terraform init" hasn't been run (and
so no providers were selected yet) or if there are other inconsistencies
that would cause Terraform to object on startup and require a re-run of
"terraform init".
Two different errors here caused this test to pass even though it was
incorrect: the wanted version string was incorrect, but the test for it
was also inverted, and so together this made the test pass even though
it was actually not testing the output at all.