Commit Graph

33 Commits

Author SHA1 Message Date
Kristin Laemmert 604e65bb62 Revert "backend/local: release lock if there is an error in Context() (#25427)"
This reverts commit 1ba0d615e7.
2020-06-30 14:12:32 -04:00
Kristin Laemmert 1ba0d615e7
backend/local: release lock if there is an error in Context() (#25427)
* command/console: return in case of errors before trying to unlock remote
state

The remote backend `Context` would exit without an active lock if there
was an error, while the local backend `Context` exited *with* a lock. This
caused a problem in `terraform console`, which would call unlock
regardless of error status.

This commit makes the local and remote backend consistently unlock the
state incase of error, and updates terraform console to check for errors
before trying to unlock the state.

* adding tests for remote and local backends
2020-06-29 14:57:42 -04:00
Pam Selle 37d16b2f79 Deletions from backend local 2020-01-13 15:30:46 -05:00
Martin Atkins 8664749b59 backend: Allow certain commands to opt out of required variable checks
Terraform Core expects all variables to be set, but for some ancillary
commands it's fine for them to just be set to placeholders because the
variable values themselves are not key to the command's functionality
as long as the terraform.Context is still self-consistent.

For such commands, rather than prompting for interactive input for
required variables we'll just stub them out as unknowns to reflect that
they are placeholders for values that a user would normally need to
provide.

This achieves a similar effect to how these commands behaved before, but
without the tendency to produce a slightly invalid terraform.Context that
would fail in strange ways when asked to run certain operations.
2019-10-10 10:07:01 -07:00
Martin Atkins e21f0fa61e backend/local: Handle interactive prompts for variables in UI layer
During the 0.12 work we intended to move all of the variable value
collection logic into the UI layer (command package and backend packages)
and present them all together as a unified data structure to Terraform
Core. However, we didn't quite succeed because the interactive prompts
for unset required variables were still being handled _after_ calling
into Terraform Core.

Here we complete that earlier work by moving the interactive prompts for
variables out into the UI layer too, thus allowing us to handle final
validation of the variables all together in one place and do so in the UI
layer where we have the most context still available about where all of
these values are coming from.

This allows us to fix a problem where previously disabling input with
-input=false on the command line could cause Terraform Core to receive an
incomplete set of variable values, and fail with a bad error message.

As a consequence of this refactoring, the scope of terraform.Context.Input
is now reduced to only gathering provider configuration arguments. Ideally
that too would move into the UI layer somehow in a future commit, but
that's a problem for another day.
2019-10-10 10:07:01 -07:00
Kristin Laemmert 67aa944166 backend/local: decode variables with cty.DynamicPseudoType
Variables values are marshalled with an explicit type of
cty.DynamicPseudoType, but were being decoded using `Implied Type` to
try and guess the type. This was causing errors because `Implied Type`
does not expect to find a late-bound value.
2018-11-30 15:15:28 -08:00
Sander van Harmelen 35d9ce3f92 backend/remote: implement the Local interface 2018-11-26 20:50:25 +01:00
Sander van Harmelen 48ef7ecfa6 Updates after running `make fmt` with Go v1.11.1 2018-10-17 14:11:08 -07:00
Martin Atkins 741d334ee4 command: Even more fixes for "apply" command tests 2018-10-16 19:14:11 -07:00
Martin Atkins c5940f2438 backend/local: Increase log verbosity for backend context construction
There are several steps here and a number of them can include reaching out
to remote servers or executing local processes, so it's helpful to have
some trace logs to better narrow down causes of errors and hangs during
this step.
2018-10-16 19:14:11 -07:00
Martin Atkins a6f399517b backend/local: reinstate additional steps in plan file processing
In earlier refactoring we skipped implementing prior state safety checks,
propagating the target addresses from plan, and verifying that all of
the providers are exactly the same from the plan being created.

This change reinstates those checks, including a new error message for
the "stale plan" situation.
2018-10-16 19:14:11 -07:00
Martin Atkins 91d2de6a25 backend/local: Stub out remaining planfile todos with errors
This is just to make sure they show up later when we are working on the
tests, so we can be sure not to forget to address them.
2018-10-16 19:14:11 -07:00
Martin Atkins fa3b4fc9de backend/local: Populate changes into a context built from planfile 2018-10-16 19:14:11 -07:00
Martin Atkins b0016e9cf6 command: Allow tests to run to completion without panics or hangs
There are still 160 test failures as of this commit, but at least the test
program can run to completion and list out all the failures.
2018-10-16 19:14:11 -07:00
Martin Atkins a6b5980a4f backend/local: Bail immediately if terraform.Context can't be created 2018-10-16 19:14:11 -07:00
Martin Atkins a3403f2766 terraform: Ugly huge change to weave in new State and Plan types
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.

The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.

The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.

Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
2018-10-16 19:11:09 -07:00
Martin Atkins c937c06a03 terraform: ugly huge change to weave in new HCL2-oriented types
Due to how deeply the configuration types go into Terraform Core, there
isn't a great way to switch out to HCL2 gradually. As a consequence, this
huge commit gets us from the old state to a _compilable_ new state, but
does not yet attempt to fix any tests and has a number of known missing
parts and bugs. We will continue to iterate on this in forthcoming
commits, heading back towards passing tests and making Terraform
fully-functional again.

The three main goals here are:
- Use the configuration models from the "configs" package instead of the
  older models in the "config" package, which is now deprecated and
  preserved only to help us write our migration tool.
- Do expression inspection and evaluation using the functionality of the
  new "lang" package, instead of the Interpolator type and related
  functionality in the main "terraform" package.
- Represent addresses of various objects using types in the addrs package,
  rather than hand-constructed strings. This is not critical to support
  the above, but was a big help during the implementation of these other
  points since it made it much more explicit what kind of address is
  expected in each context.

Since our new packages are built to accommodate some future planned
features that are not yet implemented (e.g. the "for_each" argument on
resources, "count"/"for_each" on modules), and since there's still a fair
amount of functionality still using old-style APIs, there is a moderate
amount of shimming here to connect new assumptions with old, hopefully in
a way that makes it easier to find and eliminate these shims later.

I apologize in advance to the person who inevitably just found this huge
commit while spelunking through the commit history.
2018-10-16 18:46:46 -07:00
Martin Atkins 5782357c28 backend: Update interface and implementations for new config loader
The new config loader requires some steps to happen in a different
order, particularly in regard to knowing the schema in order to
decode the configuration.

Here we lean directly on the configschema package, rather than
on helper/schema.Backend as before, because it's generally
sufficient for our needs here and this prepares us for the
helper/schema package later moving out into its own repository
to seed a "plugin SDK".
2018-10-16 18:39:12 -07:00
Martin Atkins bd10b84a8e command/format: include source snippets in diagnostics
If we get a diagnostic message that references a source range, and if the
source code for the referenced file is available, we'll show a snippet of
the source code with the source range highlighted.

At the moment we have no cache of source code, so in practice this
codepath can never be visited. Callers to format.Diagnostic will be
gradually updated in subsequent commits.
2018-10-16 18:20:32 -07:00
Sander van Harmelen 495d1ea350 Use New() instead of `once.Do(b.init)` 2018-08-03 11:29:11 +02:00
James Bardin e9a76808df create clistate.Locker interface
Simplify the use of clistate.Lock by creating a clistate.Locker
instance, which stores the context of locking a state, to allow unlock
to be called without knowledge of how the state was locked.

This alows the backend code to bring the needed UI methods to the point
where the state is locked, and still unlock the state from an outer
scope.

Provide a NoopLocker as well, so that callers can always call Unlock
without verifying the status of the lock.

Add the StateLocker field to the backend.Operation, so that the state
lock can be carried between the different function scopes of the backend
code. This will allow the backend context to lock the state before it's
read, while allowing the different operations to unlock the state when
they complete.
2018-02-23 16:48:15 -05:00
Martin Atkins ba0514106a return tfdiags.Diagnostics from validation methods
Validation is the best time to return detailed diagnostics
to the user since we're much more likely to have source
location information, etc than we are in later operations.

This change doesn't actually add any detail to the messages
yet, but it changes the interface so that we can gradually
introduce more detailed diagnostics over time.

While here there are some minor adjustments to some of the
messages to improve their consistency with terminology we
use elsewhere.
2017-11-28 11:15:29 -08:00
James Bardin a1727ec4c2 Add warning to mismatched plan state
Forward-port the plan state check from the 0.9 series.
0.10 has improved the serial handling for the state, so this adds
relevant comments and some more test coverage for the case of an
incrementing serial during apply.
2017-07-17 10:41:29 -04:00
James Bardin 5be15ed77c have the local backend provide a plugin init msg
During plan and apply, because the provider constraints need to be built
from a plan, they are not checked until the terraform.Context is
created. Since the context is always requested by the backend during the
Operation, the backend needs to be responsible for generating contextual
error messages for the user.

Instead of formatting the ResolveProviders errors during NewContext,
return a special error type, ResourceProviderError to signal that
init will be required. The backend can then extract and format the
errors.
2017-06-22 13:15:30 -04:00
Martin Atkins f7ce6a15f8 backend: Operation.Environment renamed to "Workspace"
This is part of an effort to switch this terminology across all of
Terraform.
2017-06-09 16:26:26 -07:00
James Bardin 65527f35a4 update local.Local to match the latest Backend
Update the methods, remove the handling of "current", and make tests
pass.
2017-02-28 16:07:31 -05:00
James Bardin f2e496a14c Have backend operations properly unlock state
Make sure unlock is called with the correct LockID during operations
2017-02-15 14:41:55 -05:00
James Bardin f5ed8cd288 Use NewLockInfo to get a pre-populated value
Using NewLockInfo ensure we start with all required fields filled.
2017-02-15 14:41:55 -05:00
James Bardin 67dc16c9ca Make backend/local test pass 2017-02-15 14:41:55 -05:00
Mitchell Hashimoto 65982bd412
backend/local: use new command/state package for better UX 2017-02-14 11:17:28 -08:00
Mitchell Hashimoto bdca9bffe4
backend/local: output warnings
Fixes #11628

This is a simple fix to output warnings. I originally forgot to do this
since the local backend didn't have a CLI UI at the time. It does now so
this is an easy fix.
2017-02-07 13:22:28 -08:00
James Bardin 9cdba1f199 enable local state locking for apply
Have the LocalBackend lock the state during operations, and enble this
for the apply comand.
2017-02-02 18:08:28 -05:00
Mitchell Hashimoto 397e1b3132
backend/local
The local backend implementation is an implementation of
backend.Enhanced that recreates all the behavior of the CLI but through
the backend interface.
2017-01-26 14:33:49 -08:00