terraform/vendor/github.com/aws/aws-sdk-go/service/kinesis/api.go

5270 lines
195 KiB
Go
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Code generated by private/model/cli/gen-api/main.go. DO NOT EDIT.
package kinesis
import (
"fmt"
"time"
"github.com/aws/aws-sdk-go/aws"
"github.com/aws/aws-sdk-go/aws/awsutil"
"github.com/aws/aws-sdk-go/aws/request"
"github.com/aws/aws-sdk-go/private/protocol"
"github.com/aws/aws-sdk-go/private/protocol/jsonrpc"
)
const opAddTagsToStream = "AddTagsToStream"
// AddTagsToStreamRequest generates a "aws/request.Request" representing the
// client's request for the AddTagsToStream operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See AddTagsToStream for more information on using the AddTagsToStream
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the AddTagsToStreamRequest method.
// req, resp := client.AddTagsToStreamRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/AddTagsToStream
func (c *Kinesis) AddTagsToStreamRequest(input *AddTagsToStreamInput) (req *request.Request, output *AddTagsToStreamOutput) {
op := &request.Operation{
Name: opAddTagsToStream,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &AddTagsToStreamInput{}
}
output = &AddTagsToStreamOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// AddTagsToStream API operation for Amazon Kinesis.
//
// Adds or updates tags for the specified Amazon Kinesis stream. Each stream
// can have up to 10 tags.
//
// If tags have already been assigned to the stream, AddTagsToStream overwrites
// any existing tags that correspond to the specified tag keys.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation AddTagsToStream for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/AddTagsToStream
func (c *Kinesis) AddTagsToStream(input *AddTagsToStreamInput) (*AddTagsToStreamOutput, error) {
req, out := c.AddTagsToStreamRequest(input)
return out, req.Send()
}
// AddTagsToStreamWithContext is the same as AddTagsToStream with the addition of
// the ability to pass a context and additional request options.
//
// See AddTagsToStream for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) AddTagsToStreamWithContext(ctx aws.Context, input *AddTagsToStreamInput, opts ...request.Option) (*AddTagsToStreamOutput, error) {
req, out := c.AddTagsToStreamRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opCreateStream = "CreateStream"
// CreateStreamRequest generates a "aws/request.Request" representing the
// client's request for the CreateStream operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See CreateStream for more information on using the CreateStream
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the CreateStreamRequest method.
// req, resp := client.CreateStreamRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/CreateStream
func (c *Kinesis) CreateStreamRequest(input *CreateStreamInput) (req *request.Request, output *CreateStreamOutput) {
op := &request.Operation{
Name: opCreateStream,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &CreateStreamInput{}
}
output = &CreateStreamOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// CreateStream API operation for Amazon Kinesis.
//
// Creates an Amazon Kinesis stream. A stream captures and transports data records
// that are continuously emitted from different data sources or producers. Scale-out
// within a stream is explicitly supported by means of shards, which are uniquely
// identified groups of data records in a stream.
//
// You specify and control the number of shards that a stream is composed of.
// Each shard can support reads up to 5 transactions per second, up to a maximum
// data read total of 2 MB per second. Each shard can support writes up to 1,000
// records per second, up to a maximum data write total of 1 MB per second.
// You can add shards to a stream if the amount of data input increases and
// you can remove shards if the amount of data input decreases.
//
// The stream name identifies the stream. The name is scoped to the AWS account
// used by the application. It is also scoped by region. That is, two streams
// in two different accounts can have the same name, and two streams in the
// same account, but in two different regions, can have the same name.
//
// CreateStream is an asynchronous operation. Upon receiving a CreateStream
// request, Amazon Kinesis immediately returns and sets the stream status to
// CREATING. After the stream is created, Amazon Kinesis sets the stream status
// to ACTIVE. You should perform read and write operations only on an ACTIVE
// stream.
//
// You receive a LimitExceededException when making a CreateStream request if
// you try to do one of the following:
//
// * Have more than five streams in the CREATING state at any point in time.
//
// * Create more shards than are authorized for your account.
//
// For the default shard limit for an AWS account, see Streams Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)
// in the Amazon Kinesis Streams Developer Guide. If you need to increase this
// limit, contact AWS Support (http://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html).
//
// You can use DescribeStream to check the stream status, which is returned
// in StreamStatus.
//
// CreateStream has a limit of 5 transactions per second per account.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation CreateStream for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/CreateStream
func (c *Kinesis) CreateStream(input *CreateStreamInput) (*CreateStreamOutput, error) {
req, out := c.CreateStreamRequest(input)
return out, req.Send()
}
// CreateStreamWithContext is the same as CreateStream with the addition of
// the ability to pass a context and additional request options.
//
// See CreateStream for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) CreateStreamWithContext(ctx aws.Context, input *CreateStreamInput, opts ...request.Option) (*CreateStreamOutput, error) {
req, out := c.CreateStreamRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opDecreaseStreamRetentionPeriod = "DecreaseStreamRetentionPeriod"
// DecreaseStreamRetentionPeriodRequest generates a "aws/request.Request" representing the
// client's request for the DecreaseStreamRetentionPeriod operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See DecreaseStreamRetentionPeriod for more information on using the DecreaseStreamRetentionPeriod
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the DecreaseStreamRetentionPeriodRequest method.
// req, resp := client.DecreaseStreamRetentionPeriodRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DecreaseStreamRetentionPeriod
func (c *Kinesis) DecreaseStreamRetentionPeriodRequest(input *DecreaseStreamRetentionPeriodInput) (req *request.Request, output *DecreaseStreamRetentionPeriodOutput) {
op := &request.Operation{
Name: opDecreaseStreamRetentionPeriod,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &DecreaseStreamRetentionPeriodInput{}
}
output = &DecreaseStreamRetentionPeriodOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// DecreaseStreamRetentionPeriod API operation for Amazon Kinesis.
//
// Decreases the Amazon Kinesis stream's retention period, which is the length
// of time data records are accessible after they are added to the stream. The
// minimum value of a stream's retention period is 24 hours.
//
// This operation may result in lost data. For example, if the stream's retention
// period is 48 hours and is decreased to 24 hours, any data already in the
// stream that is older than 24 hours is inaccessible.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation DecreaseStreamRetentionPeriod for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DecreaseStreamRetentionPeriod
func (c *Kinesis) DecreaseStreamRetentionPeriod(input *DecreaseStreamRetentionPeriodInput) (*DecreaseStreamRetentionPeriodOutput, error) {
req, out := c.DecreaseStreamRetentionPeriodRequest(input)
return out, req.Send()
}
// DecreaseStreamRetentionPeriodWithContext is the same as DecreaseStreamRetentionPeriod with the addition of
// the ability to pass a context and additional request options.
//
// See DecreaseStreamRetentionPeriod for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) DecreaseStreamRetentionPeriodWithContext(ctx aws.Context, input *DecreaseStreamRetentionPeriodInput, opts ...request.Option) (*DecreaseStreamRetentionPeriodOutput, error) {
req, out := c.DecreaseStreamRetentionPeriodRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opDeleteStream = "DeleteStream"
// DeleteStreamRequest generates a "aws/request.Request" representing the
// client's request for the DeleteStream operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See DeleteStream for more information on using the DeleteStream
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the DeleteStreamRequest method.
// req, resp := client.DeleteStreamRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DeleteStream
func (c *Kinesis) DeleteStreamRequest(input *DeleteStreamInput) (req *request.Request, output *DeleteStreamOutput) {
op := &request.Operation{
Name: opDeleteStream,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &DeleteStreamInput{}
}
output = &DeleteStreamOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// DeleteStream API operation for Amazon Kinesis.
//
// Deletes an Amazon Kinesis stream and all its shards and data. You must shut
// down any applications that are operating on the stream before you delete
// the stream. If an application attempts to operate on a deleted stream, it
// will receive the exception ResourceNotFoundException.
//
// If the stream is in the ACTIVE state, you can delete it. After a DeleteStream
// request, the specified stream is in the DELETING state until Amazon Kinesis
// completes the deletion.
//
// Note: Amazon Kinesis might continue to accept data read and write operations,
// such as PutRecord, PutRecords, and GetRecords, on a stream in the DELETING
// state until the stream deletion is complete.
//
// When you delete a stream, any shards in that stream are also deleted, and
// any tags are dissociated from the stream.
//
// You can use the DescribeStream operation to check the state of the stream,
// which is returned in StreamStatus.
//
// DeleteStream has a limit of 5 transactions per second per account.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation DeleteStream for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DeleteStream
func (c *Kinesis) DeleteStream(input *DeleteStreamInput) (*DeleteStreamOutput, error) {
req, out := c.DeleteStreamRequest(input)
return out, req.Send()
}
// DeleteStreamWithContext is the same as DeleteStream with the addition of
// the ability to pass a context and additional request options.
//
// See DeleteStream for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) DeleteStreamWithContext(ctx aws.Context, input *DeleteStreamInput, opts ...request.Option) (*DeleteStreamOutput, error) {
req, out := c.DeleteStreamRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opDescribeLimits = "DescribeLimits"
// DescribeLimitsRequest generates a "aws/request.Request" representing the
// client's request for the DescribeLimits operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See DescribeLimits for more information on using the DescribeLimits
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the DescribeLimitsRequest method.
// req, resp := client.DescribeLimitsRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DescribeLimits
func (c *Kinesis) DescribeLimitsRequest(input *DescribeLimitsInput) (req *request.Request, output *DescribeLimitsOutput) {
op := &request.Operation{
Name: opDescribeLimits,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &DescribeLimitsInput{}
}
output = &DescribeLimitsOutput{}
req = c.newRequest(op, input, output)
return
}
// DescribeLimits API operation for Amazon Kinesis.
//
// Describes the shard limits and usage for the account.
//
// If you update your account limits, the old limits might be returned for a
// few minutes.
//
// This operation has a limit of 1 transaction per second per account.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation DescribeLimits for usage and error information.
//
// Returned Error Codes:
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DescribeLimits
func (c *Kinesis) DescribeLimits(input *DescribeLimitsInput) (*DescribeLimitsOutput, error) {
req, out := c.DescribeLimitsRequest(input)
return out, req.Send()
}
// DescribeLimitsWithContext is the same as DescribeLimits with the addition of
// the ability to pass a context and additional request options.
//
// See DescribeLimits for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) DescribeLimitsWithContext(ctx aws.Context, input *DescribeLimitsInput, opts ...request.Option) (*DescribeLimitsOutput, error) {
req, out := c.DescribeLimitsRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opDescribeStream = "DescribeStream"
// DescribeStreamRequest generates a "aws/request.Request" representing the
// client's request for the DescribeStream operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See DescribeStream for more information on using the DescribeStream
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the DescribeStreamRequest method.
// req, resp := client.DescribeStreamRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DescribeStream
func (c *Kinesis) DescribeStreamRequest(input *DescribeStreamInput) (req *request.Request, output *DescribeStreamOutput) {
op := &request.Operation{
Name: opDescribeStream,
HTTPMethod: "POST",
HTTPPath: "/",
Paginator: &request.Paginator{
InputTokens: []string{"ExclusiveStartShardId"},
OutputTokens: []string{"StreamDescription.Shards[-1].ShardId"},
LimitToken: "Limit",
TruncationToken: "StreamDescription.HasMoreShards",
},
}
if input == nil {
input = &DescribeStreamInput{}
}
output = &DescribeStreamOutput{}
req = c.newRequest(op, input, output)
return
}
// DescribeStream API operation for Amazon Kinesis.
//
// Describes the specified Amazon Kinesis stream.
//
// The information returned includes the stream name, Amazon Resource Name (ARN),
// creation time, enhanced metric configuration, and shard map. The shard map
// is an array of shard objects. For each shard object, there is the hash key
// and sequence number ranges that the shard spans, and the IDs of any earlier
// shards that played in a role in creating the shard. Every record ingested
// in the stream is identified by a sequence number, which is assigned when
// the record is put into the stream.
//
// You can limit the number of shards returned by each call. For more information,
// see Retrieving Shards from a Stream (http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-retrieve-shards.html)
// in the Amazon Kinesis Streams Developer Guide.
//
// There are no guarantees about the chronological order shards returned. To
// process shards in chronological order, use the ID of the parent shard to
// track the lineage to the oldest shard.
//
// This operation has a limit of 10 transactions per second per account.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation DescribeStream for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DescribeStream
func (c *Kinesis) DescribeStream(input *DescribeStreamInput) (*DescribeStreamOutput, error) {
req, out := c.DescribeStreamRequest(input)
return out, req.Send()
}
// DescribeStreamWithContext is the same as DescribeStream with the addition of
// the ability to pass a context and additional request options.
//
// See DescribeStream for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) DescribeStreamWithContext(ctx aws.Context, input *DescribeStreamInput, opts ...request.Option) (*DescribeStreamOutput, error) {
req, out := c.DescribeStreamRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
// DescribeStreamPages iterates over the pages of a DescribeStream operation,
// calling the "fn" function with the response data for each page. To stop
// iterating, return false from the fn function.
//
// See DescribeStream method for more information on how to use this operation.
//
// Note: This operation can generate multiple requests to a service.
//
// // Example iterating over at most 3 pages of a DescribeStream operation.
// pageNum := 0
// err := client.DescribeStreamPages(params,
// func(page *DescribeStreamOutput, lastPage bool) bool {
// pageNum++
// fmt.Println(page)
// return pageNum <= 3
// })
//
func (c *Kinesis) DescribeStreamPages(input *DescribeStreamInput, fn func(*DescribeStreamOutput, bool) bool) error {
return c.DescribeStreamPagesWithContext(aws.BackgroundContext(), input, fn)
}
// DescribeStreamPagesWithContext same as DescribeStreamPages except
// it takes a Context and allows setting request options on the pages.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) DescribeStreamPagesWithContext(ctx aws.Context, input *DescribeStreamInput, fn func(*DescribeStreamOutput, bool) bool, opts ...request.Option) error {
p := request.Pagination{
NewRequest: func() (*request.Request, error) {
var inCpy *DescribeStreamInput
if input != nil {
tmp := *input
inCpy = &tmp
}
req, _ := c.DescribeStreamRequest(inCpy)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return req, nil
},
}
cont := true
for p.Next() && cont {
cont = fn(p.Page().(*DescribeStreamOutput), !p.HasNextPage())
}
return p.Err()
}
const opDisableEnhancedMonitoring = "DisableEnhancedMonitoring"
// DisableEnhancedMonitoringRequest generates a "aws/request.Request" representing the
// client's request for the DisableEnhancedMonitoring operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See DisableEnhancedMonitoring for more information on using the DisableEnhancedMonitoring
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the DisableEnhancedMonitoringRequest method.
// req, resp := client.DisableEnhancedMonitoringRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DisableEnhancedMonitoring
func (c *Kinesis) DisableEnhancedMonitoringRequest(input *DisableEnhancedMonitoringInput) (req *request.Request, output *EnhancedMonitoringOutput) {
op := &request.Operation{
Name: opDisableEnhancedMonitoring,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &DisableEnhancedMonitoringInput{}
}
output = &EnhancedMonitoringOutput{}
req = c.newRequest(op, input, output)
return
}
// DisableEnhancedMonitoring API operation for Amazon Kinesis.
//
// Disables enhanced monitoring.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation DisableEnhancedMonitoring for usage and error information.
//
// Returned Error Codes:
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DisableEnhancedMonitoring
func (c *Kinesis) DisableEnhancedMonitoring(input *DisableEnhancedMonitoringInput) (*EnhancedMonitoringOutput, error) {
req, out := c.DisableEnhancedMonitoringRequest(input)
return out, req.Send()
}
// DisableEnhancedMonitoringWithContext is the same as DisableEnhancedMonitoring with the addition of
// the ability to pass a context and additional request options.
//
// See DisableEnhancedMonitoring for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) DisableEnhancedMonitoringWithContext(ctx aws.Context, input *DisableEnhancedMonitoringInput, opts ...request.Option) (*EnhancedMonitoringOutput, error) {
req, out := c.DisableEnhancedMonitoringRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opEnableEnhancedMonitoring = "EnableEnhancedMonitoring"
// EnableEnhancedMonitoringRequest generates a "aws/request.Request" representing the
// client's request for the EnableEnhancedMonitoring operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See EnableEnhancedMonitoring for more information on using the EnableEnhancedMonitoring
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the EnableEnhancedMonitoringRequest method.
// req, resp := client.EnableEnhancedMonitoringRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/EnableEnhancedMonitoring
func (c *Kinesis) EnableEnhancedMonitoringRequest(input *EnableEnhancedMonitoringInput) (req *request.Request, output *EnhancedMonitoringOutput) {
op := &request.Operation{
Name: opEnableEnhancedMonitoring,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &EnableEnhancedMonitoringInput{}
}
output = &EnhancedMonitoringOutput{}
req = c.newRequest(op, input, output)
return
}
// EnableEnhancedMonitoring API operation for Amazon Kinesis.
//
// Enables enhanced Amazon Kinesis stream monitoring for shard-level metrics.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation EnableEnhancedMonitoring for usage and error information.
//
// Returned Error Codes:
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/EnableEnhancedMonitoring
func (c *Kinesis) EnableEnhancedMonitoring(input *EnableEnhancedMonitoringInput) (*EnhancedMonitoringOutput, error) {
req, out := c.EnableEnhancedMonitoringRequest(input)
return out, req.Send()
}
// EnableEnhancedMonitoringWithContext is the same as EnableEnhancedMonitoring with the addition of
// the ability to pass a context and additional request options.
//
// See EnableEnhancedMonitoring for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) EnableEnhancedMonitoringWithContext(ctx aws.Context, input *EnableEnhancedMonitoringInput, opts ...request.Option) (*EnhancedMonitoringOutput, error) {
req, out := c.EnableEnhancedMonitoringRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opGetRecords = "GetRecords"
// GetRecordsRequest generates a "aws/request.Request" representing the
// client's request for the GetRecords operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See GetRecords for more information on using the GetRecords
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the GetRecordsRequest method.
// req, resp := client.GetRecordsRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/GetRecords
func (c *Kinesis) GetRecordsRequest(input *GetRecordsInput) (req *request.Request, output *GetRecordsOutput) {
op := &request.Operation{
Name: opGetRecords,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &GetRecordsInput{}
}
output = &GetRecordsOutput{}
req = c.newRequest(op, input, output)
return
}
// GetRecords API operation for Amazon Kinesis.
//
// Gets data records from an Amazon Kinesis stream's shard.
//
// Specify a shard iterator using the ShardIterator parameter. The shard iterator
// specifies the position in the shard from which you want to start reading
// data records sequentially. If there are no records available in the portion
// of the shard that the iterator points to, GetRecords returns an empty list.
// Note that it might take multiple calls to get to a portion of the shard that
// contains records.
//
// You can scale by provisioning multiple shards per stream while considering
// service limits (for more information, see Streams Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)
// in the Amazon Kinesis Streams Developer Guide). Your application should have
// one thread per shard, each reading continuously from its stream. To read
// from a stream continually, call GetRecords in a loop. Use GetShardIterator
// to get the shard iterator to specify in the first GetRecords call. GetRecords
// returns a new shard iterator in NextShardIterator. Specify the shard iterator
// returned in NextShardIterator in subsequent calls to GetRecords. Note that
// if the shard has been closed, the shard iterator can't return more data and
// GetRecords returns null in NextShardIterator. You can terminate the loop
// when the shard is closed, or when the shard iterator reaches the record with
// the sequence number or other attribute that marks it as the last record to
// process.
//
// Each data record can be up to 1 MB in size, and each shard can read up to
// 2 MB per second. You can ensure that your calls don't exceed the maximum
// supported size or throughput by using the Limit parameter to specify the
// maximum number of records that GetRecords can return. Consider your average
// record size when determining this limit.
//
// The size of the data returned by GetRecords varies depending on the utilization
// of the shard. The maximum size of data that GetRecords can return is 10 MB.
// If a call returns this amount of data, subsequent calls made within the next
// 5 seconds throw ProvisionedThroughputExceededException. If there is insufficient
// provisioned throughput on the shard, subsequent calls made within the next
// 1 second throw ProvisionedThroughputExceededException. Note that GetRecords
// won't return any data when it throws an exception. For this reason, we recommend
// that you wait one second between calls to GetRecords; however, it's possible
// that the application will get exceptions for longer than 1 second.
//
// To detect whether the application is falling behind in processing, you can
// use the MillisBehindLatest response attribute. You can also monitor the stream
// using CloudWatch metrics and other mechanisms (see Monitoring (http://docs.aws.amazon.com/kinesis/latest/dev/monitoring.html)
// in the Amazon Kinesis Streams Developer Guide).
//
// Each Amazon Kinesis record includes a value, ApproximateArrivalTimestamp,
// that is set when a stream successfully receives and stores a record. This
// is commonly referred to as a server-side timestamp, whereas a client-side
// timestamp is set when a data producer creates or sends the record to a stream
// (a data producer is any data source putting data records into a stream, for
// example with PutRecords). The timestamp has millisecond precision. There
// are no guarantees about the timestamp accuracy, or that the timestamp is
// always increasing. For example, records in a shard or across a stream might
// have timestamps that are out of order.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation GetRecords for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException"
// The request rate for the stream is too high, or the requested data is too
// large for the available throughput. Reduce the frequency or size of your
// requests. For more information, see Streams Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)
// in the Amazon Kinesis Streams Developer Guide, and Error Retries and Exponential
// Backoff in AWS (http://docs.aws.amazon.com/general/latest/gr/api-retries.html)
// in the AWS General Reference.
//
// * ErrCodeExpiredIteratorException "ExpiredIteratorException"
// The provided iterator exceeds the maximum age allowed.
//
// * ErrCodeKMSDisabledException "KMSDisabledException"
// The request was rejected because the specified CMK isn't enabled.
//
// * ErrCodeKMSInvalidStateException "KMSInvalidStateException"
// The request was rejected because the state of the specified resource isn't
// valid for this request. For more information, see How Key State Affects Use
// of a Customer Master Key (http://docs.aws.amazon.com/kms/latest/developerguide/key-state.html)
// in the AWS Key Management Service Developer Guide.
//
// * ErrCodeKMSAccessDeniedException "KMSAccessDeniedException"
// The ciphertext references a key that doesn't exist or that you don't have
// access to.
//
// * ErrCodeKMSNotFoundException "KMSNotFoundException"
// The request was rejected because the specified entity or resource couldn't
// be found.
//
// * ErrCodeKMSOptInRequired "KMSOptInRequired"
// The AWS access key ID needs a subscription for the service.
//
// * ErrCodeKMSThrottlingException "KMSThrottlingException"
// The request was denied due to request throttling. For more information about
// throttling, see Limits (http://docs.aws.amazon.com/kms/latest/developerguide/limits.html#requests-per-second)
// in the AWS Key Management Service Developer Guide.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/GetRecords
func (c *Kinesis) GetRecords(input *GetRecordsInput) (*GetRecordsOutput, error) {
req, out := c.GetRecordsRequest(input)
return out, req.Send()
}
// GetRecordsWithContext is the same as GetRecords with the addition of
// the ability to pass a context and additional request options.
//
// See GetRecords for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) GetRecordsWithContext(ctx aws.Context, input *GetRecordsInput, opts ...request.Option) (*GetRecordsOutput, error) {
req, out := c.GetRecordsRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opGetShardIterator = "GetShardIterator"
// GetShardIteratorRequest generates a "aws/request.Request" representing the
// client's request for the GetShardIterator operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See GetShardIterator for more information on using the GetShardIterator
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the GetShardIteratorRequest method.
// req, resp := client.GetShardIteratorRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/GetShardIterator
func (c *Kinesis) GetShardIteratorRequest(input *GetShardIteratorInput) (req *request.Request, output *GetShardIteratorOutput) {
op := &request.Operation{
Name: opGetShardIterator,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &GetShardIteratorInput{}
}
output = &GetShardIteratorOutput{}
req = c.newRequest(op, input, output)
return
}
// GetShardIterator API operation for Amazon Kinesis.
//
// Gets an Amazon Kinesis shard iterator. A shard iterator expires five minutes
// after it is returned to the requester.
//
// A shard iterator specifies the shard position from which to start reading
// data records sequentially. The position is specified using the sequence number
// of a data record in a shard. A sequence number is the identifier associated
// with every record ingested in the stream, and is assigned when a record is
// put into the stream. Each stream has one or more shards.
//
// You must specify the shard iterator type. For example, you can set the ShardIteratorType
// parameter to read exactly from the position denoted by a specific sequence
// number by using the AT_SEQUENCE_NUMBER shard iterator type, or right after
// the sequence number by using the AFTER_SEQUENCE_NUMBER shard iterator type,
// using sequence numbers returned by earlier calls to PutRecord, PutRecords,
// GetRecords, or DescribeStream. In the request, you can specify the shard
// iterator type AT_TIMESTAMP to read records from an arbitrary point in time,
// TRIM_HORIZON to cause ShardIterator to point to the last untrimmed record
// in the shard in the system (the oldest data record in the shard), or LATEST
// so that you always read the most recent data in the shard.
//
// When you read repeatedly from a stream, use a GetShardIterator request to
// get the first shard iterator for use in your first GetRecords request and
// for subsequent reads use the shard iterator returned by the GetRecords request
// in NextShardIterator. A new shard iterator is returned by every GetRecords
// request in NextShardIterator, which you use in the ShardIterator parameter
// of the next GetRecords request.
//
// If a GetShardIterator request is made too often, you receive a ProvisionedThroughputExceededException.
// For more information about throughput limits, see GetRecords, and Streams
// Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)
// in the Amazon Kinesis Streams Developer Guide.
//
// If the shard is closed, GetShardIterator returns a valid iterator for the
// last sequence number of the shard. Note that a shard can be closed as a result
// of using SplitShard or MergeShards.
//
// GetShardIterator has a limit of 5 transactions per second per account per
// open shard.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation GetShardIterator for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException"
// The request rate for the stream is too high, or the requested data is too
// large for the available throughput. Reduce the frequency or size of your
// requests. For more information, see Streams Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)
// in the Amazon Kinesis Streams Developer Guide, and Error Retries and Exponential
// Backoff in AWS (http://docs.aws.amazon.com/general/latest/gr/api-retries.html)
// in the AWS General Reference.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/GetShardIterator
func (c *Kinesis) GetShardIterator(input *GetShardIteratorInput) (*GetShardIteratorOutput, error) {
req, out := c.GetShardIteratorRequest(input)
return out, req.Send()
}
// GetShardIteratorWithContext is the same as GetShardIterator with the addition of
// the ability to pass a context and additional request options.
//
// See GetShardIterator for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) GetShardIteratorWithContext(ctx aws.Context, input *GetShardIteratorInput, opts ...request.Option) (*GetShardIteratorOutput, error) {
req, out := c.GetShardIteratorRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opIncreaseStreamRetentionPeriod = "IncreaseStreamRetentionPeriod"
// IncreaseStreamRetentionPeriodRequest generates a "aws/request.Request" representing the
// client's request for the IncreaseStreamRetentionPeriod operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See IncreaseStreamRetentionPeriod for more information on using the IncreaseStreamRetentionPeriod
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the IncreaseStreamRetentionPeriodRequest method.
// req, resp := client.IncreaseStreamRetentionPeriodRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/IncreaseStreamRetentionPeriod
func (c *Kinesis) IncreaseStreamRetentionPeriodRequest(input *IncreaseStreamRetentionPeriodInput) (req *request.Request, output *IncreaseStreamRetentionPeriodOutput) {
op := &request.Operation{
Name: opIncreaseStreamRetentionPeriod,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &IncreaseStreamRetentionPeriodInput{}
}
output = &IncreaseStreamRetentionPeriodOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// IncreaseStreamRetentionPeriod API operation for Amazon Kinesis.
//
// Increases the Amazon Kinesis stream's retention period, which is the length
// of time data records are accessible after they are added to the stream. The
// maximum value of a stream's retention period is 168 hours (7 days).
//
// Upon choosing a longer stream retention period, this operation will increase
// the time period records are accessible that have not yet expired. However,
// it will not make previous data that has expired (older than the stream's
// previous retention period) accessible after the operation has been called.
// For example, if a stream's retention period is set to 24 hours and is increased
// to 168 hours, any data that is older than 24 hours will remain inaccessible
// to consumer applications.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation IncreaseStreamRetentionPeriod for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/IncreaseStreamRetentionPeriod
func (c *Kinesis) IncreaseStreamRetentionPeriod(input *IncreaseStreamRetentionPeriodInput) (*IncreaseStreamRetentionPeriodOutput, error) {
req, out := c.IncreaseStreamRetentionPeriodRequest(input)
return out, req.Send()
}
// IncreaseStreamRetentionPeriodWithContext is the same as IncreaseStreamRetentionPeriod with the addition of
// the ability to pass a context and additional request options.
//
// See IncreaseStreamRetentionPeriod for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) IncreaseStreamRetentionPeriodWithContext(ctx aws.Context, input *IncreaseStreamRetentionPeriodInput, opts ...request.Option) (*IncreaseStreamRetentionPeriodOutput, error) {
req, out := c.IncreaseStreamRetentionPeriodRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opListStreams = "ListStreams"
// ListStreamsRequest generates a "aws/request.Request" representing the
// client's request for the ListStreams operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See ListStreams for more information on using the ListStreams
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the ListStreamsRequest method.
// req, resp := client.ListStreamsRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/ListStreams
func (c *Kinesis) ListStreamsRequest(input *ListStreamsInput) (req *request.Request, output *ListStreamsOutput) {
op := &request.Operation{
Name: opListStreams,
HTTPMethod: "POST",
HTTPPath: "/",
Paginator: &request.Paginator{
InputTokens: []string{"ExclusiveStartStreamName"},
OutputTokens: []string{"StreamNames[-1]"},
LimitToken: "Limit",
TruncationToken: "HasMoreStreams",
},
}
if input == nil {
input = &ListStreamsInput{}
}
output = &ListStreamsOutput{}
req = c.newRequest(op, input, output)
return
}
// ListStreams API operation for Amazon Kinesis.
//
// Lists your Amazon Kinesis streams.
//
// The number of streams may be too large to return from a single call to ListStreams.
// You can limit the number of returned streams using the Limit parameter. If
// you do not specify a value for the Limit parameter, Amazon Kinesis uses the
// default limit, which is currently 10.
//
// You can detect if there are more streams available to list by using the HasMoreStreams
// flag from the returned output. If there are more streams available, you can
// request more streams by using the name of the last stream returned by the
// ListStreams request in the ExclusiveStartStreamName parameter in a subsequent
// request to ListStreams. The group of stream names returned by the subsequent
// request is then added to the list. You can continue this process until all
// the stream names have been collected in the list.
//
// ListStreams has a limit of 5 transactions per second per account.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation ListStreams for usage and error information.
//
// Returned Error Codes:
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/ListStreams
func (c *Kinesis) ListStreams(input *ListStreamsInput) (*ListStreamsOutput, error) {
req, out := c.ListStreamsRequest(input)
return out, req.Send()
}
// ListStreamsWithContext is the same as ListStreams with the addition of
// the ability to pass a context and additional request options.
//
// See ListStreams for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) ListStreamsWithContext(ctx aws.Context, input *ListStreamsInput, opts ...request.Option) (*ListStreamsOutput, error) {
req, out := c.ListStreamsRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
// ListStreamsPages iterates over the pages of a ListStreams operation,
// calling the "fn" function with the response data for each page. To stop
// iterating, return false from the fn function.
//
// See ListStreams method for more information on how to use this operation.
//
// Note: This operation can generate multiple requests to a service.
//
// // Example iterating over at most 3 pages of a ListStreams operation.
// pageNum := 0
// err := client.ListStreamsPages(params,
// func(page *ListStreamsOutput, lastPage bool) bool {
// pageNum++
// fmt.Println(page)
// return pageNum <= 3
// })
//
func (c *Kinesis) ListStreamsPages(input *ListStreamsInput, fn func(*ListStreamsOutput, bool) bool) error {
return c.ListStreamsPagesWithContext(aws.BackgroundContext(), input, fn)
}
// ListStreamsPagesWithContext same as ListStreamsPages except
// it takes a Context and allows setting request options on the pages.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) ListStreamsPagesWithContext(ctx aws.Context, input *ListStreamsInput, fn func(*ListStreamsOutput, bool) bool, opts ...request.Option) error {
p := request.Pagination{
NewRequest: func() (*request.Request, error) {
var inCpy *ListStreamsInput
if input != nil {
tmp := *input
inCpy = &tmp
}
req, _ := c.ListStreamsRequest(inCpy)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return req, nil
},
}
cont := true
for p.Next() && cont {
cont = fn(p.Page().(*ListStreamsOutput), !p.HasNextPage())
}
return p.Err()
}
const opListTagsForStream = "ListTagsForStream"
// ListTagsForStreamRequest generates a "aws/request.Request" representing the
// client's request for the ListTagsForStream operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See ListTagsForStream for more information on using the ListTagsForStream
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the ListTagsForStreamRequest method.
// req, resp := client.ListTagsForStreamRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/ListTagsForStream
func (c *Kinesis) ListTagsForStreamRequest(input *ListTagsForStreamInput) (req *request.Request, output *ListTagsForStreamOutput) {
op := &request.Operation{
Name: opListTagsForStream,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &ListTagsForStreamInput{}
}
output = &ListTagsForStreamOutput{}
req = c.newRequest(op, input, output)
return
}
// ListTagsForStream API operation for Amazon Kinesis.
//
// Lists the tags for the specified Amazon Kinesis stream.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation ListTagsForStream for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/ListTagsForStream
func (c *Kinesis) ListTagsForStream(input *ListTagsForStreamInput) (*ListTagsForStreamOutput, error) {
req, out := c.ListTagsForStreamRequest(input)
return out, req.Send()
}
// ListTagsForStreamWithContext is the same as ListTagsForStream with the addition of
// the ability to pass a context and additional request options.
//
// See ListTagsForStream for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) ListTagsForStreamWithContext(ctx aws.Context, input *ListTagsForStreamInput, opts ...request.Option) (*ListTagsForStreamOutput, error) {
req, out := c.ListTagsForStreamRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opMergeShards = "MergeShards"
// MergeShardsRequest generates a "aws/request.Request" representing the
// client's request for the MergeShards operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See MergeShards for more information on using the MergeShards
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the MergeShardsRequest method.
// req, resp := client.MergeShardsRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/MergeShards
func (c *Kinesis) MergeShardsRequest(input *MergeShardsInput) (req *request.Request, output *MergeShardsOutput) {
op := &request.Operation{
Name: opMergeShards,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &MergeShardsInput{}
}
output = &MergeShardsOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// MergeShards API operation for Amazon Kinesis.
//
// Merges two adjacent shards in an Amazon Kinesis stream and combines them
// into a single shard to reduce the stream's capacity to ingest and transport
// data. Two shards are considered adjacent if the union of the hash key ranges
// for the two shards form a contiguous set with no gaps. For example, if you
// have two shards, one with a hash key range of 276...381 and the other with
// a hash key range of 382...454, then you could merge these two shards into
// a single shard that would have a hash key range of 276...454. After the merge,
// the single child shard receives data for all hash key values covered by the
// two parent shards.
//
// MergeShards is called when there is a need to reduce the overall capacity
// of a stream because of excess capacity that is not being used. You must specify
// the shard to be merged and the adjacent shard for a stream. For more information
// about merging shards, see Merge Two Shards (http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-resharding-merge.html)
// in the Amazon Kinesis Streams Developer Guide.
//
// If the stream is in the ACTIVE state, you can call MergeShards. If a stream
// is in the CREATING, UPDATING, or DELETING state, MergeShards returns a ResourceInUseException.
// If the specified stream does not exist, MergeShards returns a ResourceNotFoundException.
//
// You can use DescribeStream to check the state of the stream, which is returned
// in StreamStatus.
//
// MergeShards is an asynchronous operation. Upon receiving a MergeShards request,
// Amazon Kinesis immediately returns a response and sets the StreamStatus to
// UPDATING. After the operation is completed, Amazon Kinesis sets the StreamStatus
// to ACTIVE. Read and write operations continue to work while the stream is
// in the UPDATING state.
//
// You use DescribeStream to determine the shard IDs that are specified in the
// MergeShards request.
//
// If you try to operate on too many streams in parallel using CreateStream,
// DeleteStream, MergeShards or SplitShard, you will receive a LimitExceededException.
//
// MergeShards has limit of 5 transactions per second per account.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation MergeShards for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/MergeShards
func (c *Kinesis) MergeShards(input *MergeShardsInput) (*MergeShardsOutput, error) {
req, out := c.MergeShardsRequest(input)
return out, req.Send()
}
// MergeShardsWithContext is the same as MergeShards with the addition of
// the ability to pass a context and additional request options.
//
// See MergeShards for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) MergeShardsWithContext(ctx aws.Context, input *MergeShardsInput, opts ...request.Option) (*MergeShardsOutput, error) {
req, out := c.MergeShardsRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opPutRecord = "PutRecord"
// PutRecordRequest generates a "aws/request.Request" representing the
// client's request for the PutRecord operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See PutRecord for more information on using the PutRecord
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the PutRecordRequest method.
// req, resp := client.PutRecordRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecord
func (c *Kinesis) PutRecordRequest(input *PutRecordInput) (req *request.Request, output *PutRecordOutput) {
op := &request.Operation{
Name: opPutRecord,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &PutRecordInput{}
}
output = &PutRecordOutput{}
req = c.newRequest(op, input, output)
return
}
// PutRecord API operation for Amazon Kinesis.
//
// Writes a single data record into an Amazon Kinesis stream. Call PutRecord
// to send data into the stream for real-time ingestion and subsequent processing,
// one record at a time. Each shard can support writes up to 1,000 records per
// second, up to a maximum data write total of 1 MB per second.
//
// You must specify the name of the stream that captures, stores, and transports
// the data; a partition key; and the data blob itself.
//
// The data blob can be any type of data; for example, a segment from a log
// file, geographic/location data, website clickstream data, and so on.
//
// The partition key is used by Amazon Kinesis to distribute data across shards.
// Amazon Kinesis segregates the data records that belong to a stream into multiple
// shards, using the partition key associated with each data record to determine
// which shard a given data record belongs to.
//
// Partition keys are Unicode strings, with a maximum length limit of 256 characters
// for each key. An MD5 hash function is used to map partition keys to 128-bit
// integer values and to map associated data records to shards using the hash
// key ranges of the shards. You can override hashing the partition key to determine
// the shard by explicitly specifying a hash value using the ExplicitHashKey
// parameter. For more information, see Adding Data to a Stream (http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream)
// in the Amazon Kinesis Streams Developer Guide.
//
// PutRecord returns the shard ID of where the data record was placed and the
// sequence number that was assigned to the data record.
//
// Sequence numbers increase over time and are specific to a shard within a
// stream, not across all shards within a stream. To guarantee strictly increasing
// ordering, write serially to a shard and use the SequenceNumberForOrdering
// parameter. For more information, see Adding Data to a Stream (http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream)
// in the Amazon Kinesis Streams Developer Guide.
//
// If a PutRecord request cannot be processed because of insufficient provisioned
// throughput on the shard involved in the request, PutRecord throws ProvisionedThroughputExceededException.
//
// By default, data records are accessible for 24 hours from the time that they
// are added to a stream. You can use IncreaseStreamRetentionPeriod or DecreaseStreamRetentionPeriod
// to modify this retention period.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation PutRecord for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException"
// The request rate for the stream is too high, or the requested data is too
// large for the available throughput. Reduce the frequency or size of your
// requests. For more information, see Streams Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)
// in the Amazon Kinesis Streams Developer Guide, and Error Retries and Exponential
// Backoff in AWS (http://docs.aws.amazon.com/general/latest/gr/api-retries.html)
// in the AWS General Reference.
//
// * ErrCodeKMSDisabledException "KMSDisabledException"
// The request was rejected because the specified CMK isn't enabled.
//
// * ErrCodeKMSInvalidStateException "KMSInvalidStateException"
// The request was rejected because the state of the specified resource isn't
// valid for this request. For more information, see How Key State Affects Use
// of a Customer Master Key (http://docs.aws.amazon.com/kms/latest/developerguide/key-state.html)
// in the AWS Key Management Service Developer Guide.
//
// * ErrCodeKMSAccessDeniedException "KMSAccessDeniedException"
// The ciphertext references a key that doesn't exist or that you don't have
// access to.
//
// * ErrCodeKMSNotFoundException "KMSNotFoundException"
// The request was rejected because the specified entity or resource couldn't
// be found.
//
// * ErrCodeKMSOptInRequired "KMSOptInRequired"
// The AWS access key ID needs a subscription for the service.
//
// * ErrCodeKMSThrottlingException "KMSThrottlingException"
// The request was denied due to request throttling. For more information about
// throttling, see Limits (http://docs.aws.amazon.com/kms/latest/developerguide/limits.html#requests-per-second)
// in the AWS Key Management Service Developer Guide.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecord
func (c *Kinesis) PutRecord(input *PutRecordInput) (*PutRecordOutput, error) {
req, out := c.PutRecordRequest(input)
return out, req.Send()
}
// PutRecordWithContext is the same as PutRecord with the addition of
// the ability to pass a context and additional request options.
//
// See PutRecord for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) PutRecordWithContext(ctx aws.Context, input *PutRecordInput, opts ...request.Option) (*PutRecordOutput, error) {
req, out := c.PutRecordRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opPutRecords = "PutRecords"
// PutRecordsRequest generates a "aws/request.Request" representing the
// client's request for the PutRecords operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See PutRecords for more information on using the PutRecords
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the PutRecordsRequest method.
// req, resp := client.PutRecordsRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecords
func (c *Kinesis) PutRecordsRequest(input *PutRecordsInput) (req *request.Request, output *PutRecordsOutput) {
op := &request.Operation{
Name: opPutRecords,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &PutRecordsInput{}
}
output = &PutRecordsOutput{}
req = c.newRequest(op, input, output)
return
}
// PutRecords API operation for Amazon Kinesis.
//
// Writes multiple data records into an Amazon Kinesis stream in a single call
// (also referred to as a PutRecords request). Use this operation to send data
// into the stream for data ingestion and processing.
//
// Each PutRecords request can support up to 500 records. Each record in the
// request can be as large as 1 MB, up to a limit of 5 MB for the entire request,
// including partition keys. Each shard can support writes up to 1,000 records
// per second, up to a maximum data write total of 1 MB per second.
//
// You must specify the name of the stream that captures, stores, and transports
// the data; and an array of request Records, with each record in the array
// requiring a partition key and data blob. The record size limit applies to
// the total size of the partition key and data blob.
//
// The data blob can be any type of data; for example, a segment from a log
// file, geographic/location data, website clickstream data, and so on.
//
// The partition key is used by Amazon Kinesis as input to a hash function that
// maps the partition key and associated data to a specific shard. An MD5 hash
// function is used to map partition keys to 128-bit integer values and to map
// associated data records to shards. As a result of this hashing mechanism,
// all data records with the same partition key map to the same shard within
// the stream. For more information, see Adding Data to a Stream (http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream)
// in the Amazon Kinesis Streams Developer Guide.
//
// Each record in the Records array may include an optional parameter, ExplicitHashKey,
// which overrides the partition key to shard mapping. This parameter allows
// a data producer to determine explicitly the shard where the record is stored.
// For more information, see Adding Multiple Records with PutRecords (http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-putrecords)
// in the Amazon Kinesis Streams Developer Guide.
//
// The PutRecords response includes an array of response Records. Each record
// in the response array directly correlates with a record in the request array
// using natural ordering, from the top to the bottom of the request and response.
// The response Records array always includes the same number of records as
// the request array.
//
// The response Records array includes both successfully and unsuccessfully
// processed records. Amazon Kinesis attempts to process all records in each
// PutRecords request. A single record failure does not stop the processing
// of subsequent records.
//
// A successfully-processed record includes ShardId and SequenceNumber values.
// The ShardId parameter identifies the shard in the stream where the record
// is stored. The SequenceNumber parameter is an identifier assigned to the
// put record, unique to all records in the stream.
//
// An unsuccessfully-processed record includes ErrorCode and ErrorMessage values.
// ErrorCode reflects the type of error and can be one of the following values:
// ProvisionedThroughputExceededException or InternalFailure. ErrorMessage provides
// more detailed information about the ProvisionedThroughputExceededException
// exception including the account ID, stream name, and shard ID of the record
// that was throttled. For more information about partially successful responses,
// see Adding Multiple Records with PutRecords (http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-add-data-to-stream.html#kinesis-using-sdk-java-putrecords)
// in the Amazon Kinesis Streams Developer Guide.
//
// By default, data records are accessible for 24 hours from the time that they
// are added to a stream. You can use IncreaseStreamRetentionPeriod or DecreaseStreamRetentionPeriod
// to modify this retention period.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation PutRecords for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeProvisionedThroughputExceededException "ProvisionedThroughputExceededException"
// The request rate for the stream is too high, or the requested data is too
// large for the available throughput. Reduce the frequency or size of your
// requests. For more information, see Streams Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)
// in the Amazon Kinesis Streams Developer Guide, and Error Retries and Exponential
// Backoff in AWS (http://docs.aws.amazon.com/general/latest/gr/api-retries.html)
// in the AWS General Reference.
//
// * ErrCodeKMSDisabledException "KMSDisabledException"
// The request was rejected because the specified CMK isn't enabled.
//
// * ErrCodeKMSInvalidStateException "KMSInvalidStateException"
// The request was rejected because the state of the specified resource isn't
// valid for this request. For more information, see How Key State Affects Use
// of a Customer Master Key (http://docs.aws.amazon.com/kms/latest/developerguide/key-state.html)
// in the AWS Key Management Service Developer Guide.
//
// * ErrCodeKMSAccessDeniedException "KMSAccessDeniedException"
// The ciphertext references a key that doesn't exist or that you don't have
// access to.
//
// * ErrCodeKMSNotFoundException "KMSNotFoundException"
// The request was rejected because the specified entity or resource couldn't
// be found.
//
// * ErrCodeKMSOptInRequired "KMSOptInRequired"
// The AWS access key ID needs a subscription for the service.
//
// * ErrCodeKMSThrottlingException "KMSThrottlingException"
// The request was denied due to request throttling. For more information about
// throttling, see Limits (http://docs.aws.amazon.com/kms/latest/developerguide/limits.html#requests-per-second)
// in the AWS Key Management Service Developer Guide.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecords
func (c *Kinesis) PutRecords(input *PutRecordsInput) (*PutRecordsOutput, error) {
req, out := c.PutRecordsRequest(input)
return out, req.Send()
}
// PutRecordsWithContext is the same as PutRecords with the addition of
// the ability to pass a context and additional request options.
//
// See PutRecords for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) PutRecordsWithContext(ctx aws.Context, input *PutRecordsInput, opts ...request.Option) (*PutRecordsOutput, error) {
req, out := c.PutRecordsRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opRemoveTagsFromStream = "RemoveTagsFromStream"
// RemoveTagsFromStreamRequest generates a "aws/request.Request" representing the
// client's request for the RemoveTagsFromStream operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See RemoveTagsFromStream for more information on using the RemoveTagsFromStream
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the RemoveTagsFromStreamRequest method.
// req, resp := client.RemoveTagsFromStreamRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/RemoveTagsFromStream
func (c *Kinesis) RemoveTagsFromStreamRequest(input *RemoveTagsFromStreamInput) (req *request.Request, output *RemoveTagsFromStreamOutput) {
op := &request.Operation{
Name: opRemoveTagsFromStream,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &RemoveTagsFromStreamInput{}
}
output = &RemoveTagsFromStreamOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// RemoveTagsFromStream API operation for Amazon Kinesis.
//
// Removes tags from the specified Amazon Kinesis stream. Removed tags are deleted
// and cannot be recovered after this operation successfully completes.
//
// If you specify a tag that does not exist, it is ignored.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation RemoveTagsFromStream for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/RemoveTagsFromStream
func (c *Kinesis) RemoveTagsFromStream(input *RemoveTagsFromStreamInput) (*RemoveTagsFromStreamOutput, error) {
req, out := c.RemoveTagsFromStreamRequest(input)
return out, req.Send()
}
// RemoveTagsFromStreamWithContext is the same as RemoveTagsFromStream with the addition of
// the ability to pass a context and additional request options.
//
// See RemoveTagsFromStream for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) RemoveTagsFromStreamWithContext(ctx aws.Context, input *RemoveTagsFromStreamInput, opts ...request.Option) (*RemoveTagsFromStreamOutput, error) {
req, out := c.RemoveTagsFromStreamRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opSplitShard = "SplitShard"
// SplitShardRequest generates a "aws/request.Request" representing the
// client's request for the SplitShard operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See SplitShard for more information on using the SplitShard
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the SplitShardRequest method.
// req, resp := client.SplitShardRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/SplitShard
func (c *Kinesis) SplitShardRequest(input *SplitShardInput) (req *request.Request, output *SplitShardOutput) {
op := &request.Operation{
Name: opSplitShard,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &SplitShardInput{}
}
output = &SplitShardOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// SplitShard API operation for Amazon Kinesis.
//
// Splits a shard into two new shards in the Amazon Kinesis stream to increase
// the stream's capacity to ingest and transport data. SplitShard is called
// when there is a need to increase the overall capacity of a stream because
// of an expected increase in the volume of data records being ingested.
//
// You can also use SplitShard when a shard appears to be approaching its maximum
// utilization; for example, the producers sending data into the specific shard
// are suddenly sending more than previously anticipated. You can also call
// SplitShard to increase stream capacity, so that more Amazon Kinesis applications
// can simultaneously read data from the stream for real-time processing.
//
// You must specify the shard to be split and the new hash key, which is the
// position in the shard where the shard gets split in two. In many cases, the
// new hash key might simply be the average of the beginning and ending hash
// key, but it can be any hash key value in the range being mapped into the
// shard. For more information about splitting shards, see Split a Shard (http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-resharding-split.html)
// in the Amazon Kinesis Streams Developer Guide.
//
// You can use DescribeStream to determine the shard ID and hash key values
// for the ShardToSplit and NewStartingHashKey parameters that are specified
// in the SplitShard request.
//
// SplitShard is an asynchronous operation. Upon receiving a SplitShard request,
// Amazon Kinesis immediately returns a response and sets the stream status
// to UPDATING. After the operation is completed, Amazon Kinesis sets the stream
// status to ACTIVE. Read and write operations continue to work while the stream
// is in the UPDATING state.
//
// You can use DescribeStream to check the status of the stream, which is returned
// in StreamStatus. If the stream is in the ACTIVE state, you can call SplitShard.
// If a stream is in CREATING or UPDATING or DELETING states, DescribeStream
// returns a ResourceInUseException.
//
// If the specified stream does not exist, DescribeStream returns a ResourceNotFoundException.
// If you try to create more shards than are authorized for your account, you
// receive a LimitExceededException.
//
// For the default shard limit for an AWS account, see Streams Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)
// in the Amazon Kinesis Streams Developer Guide. If you need to increase this
// limit, contact AWS Support (http://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html).
//
// If you try to operate on too many streams simultaneously using CreateStream,
// DeleteStream, MergeShards, and/or SplitShard, you receive a LimitExceededException.
//
// SplitShard has limit of 5 transactions per second per account.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation SplitShard for usage and error information.
//
// Returned Error Codes:
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/SplitShard
func (c *Kinesis) SplitShard(input *SplitShardInput) (*SplitShardOutput, error) {
req, out := c.SplitShardRequest(input)
return out, req.Send()
}
// SplitShardWithContext is the same as SplitShard with the addition of
// the ability to pass a context and additional request options.
//
// See SplitShard for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) SplitShardWithContext(ctx aws.Context, input *SplitShardInput, opts ...request.Option) (*SplitShardOutput, error) {
req, out := c.SplitShardRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opStartStreamEncryption = "StartStreamEncryption"
// StartStreamEncryptionRequest generates a "aws/request.Request" representing the
// client's request for the StartStreamEncryption operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See StartStreamEncryption for more information on using the StartStreamEncryption
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the StartStreamEncryptionRequest method.
// req, resp := client.StartStreamEncryptionRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StartStreamEncryption
func (c *Kinesis) StartStreamEncryptionRequest(input *StartStreamEncryptionInput) (req *request.Request, output *StartStreamEncryptionOutput) {
op := &request.Operation{
Name: opStartStreamEncryption,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &StartStreamEncryptionInput{}
}
output = &StartStreamEncryptionOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// StartStreamEncryption API operation for Amazon Kinesis.
//
// Enables or updates server-side encryption using an AWS KMS key for a specified
// stream.
//
// Starting encryption is an asynchronous operation. Upon receiving the request,
// Amazon Kinesis returns immediately and sets the status of the stream to UPDATING.
// After the update is complete, Amazon Kinesis sets the status of the stream
// back to ACTIVE. Updating or applying encryption normally takes a few seconds
// to complete but it can take minutes. You can continue to read and write data
// to your stream while its status is UPDATING. Once the status of the stream
// is ACTIVE, records written to the stream will begin to be encrypted.
//
// API Limits: You can successfully apply a new AWS KMS key for server-side
// encryption 25 times in a rolling 24 hour period.
//
// Note: It can take up to 5 seconds after the stream is in an ACTIVE status
// before all records written to the stream are encrypted. After youve enabled
// encryption, you can verify encryption was applied by inspecting the API response
// from PutRecord or PutRecords.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation StartStreamEncryption for usage and error information.
//
// Returned Error Codes:
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// * ErrCodeKMSDisabledException "KMSDisabledException"
// The request was rejected because the specified CMK isn't enabled.
//
// * ErrCodeKMSInvalidStateException "KMSInvalidStateException"
// The request was rejected because the state of the specified resource isn't
// valid for this request. For more information, see How Key State Affects Use
// of a Customer Master Key (http://docs.aws.amazon.com/kms/latest/developerguide/key-state.html)
// in the AWS Key Management Service Developer Guide.
//
// * ErrCodeKMSAccessDeniedException "KMSAccessDeniedException"
// The ciphertext references a key that doesn't exist or that you don't have
// access to.
//
// * ErrCodeKMSNotFoundException "KMSNotFoundException"
// The request was rejected because the specified entity or resource couldn't
// be found.
//
// * ErrCodeKMSOptInRequired "KMSOptInRequired"
// The AWS access key ID needs a subscription for the service.
//
// * ErrCodeKMSThrottlingException "KMSThrottlingException"
// The request was denied due to request throttling. For more information about
// throttling, see Limits (http://docs.aws.amazon.com/kms/latest/developerguide/limits.html#requests-per-second)
// in the AWS Key Management Service Developer Guide.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StartStreamEncryption
func (c *Kinesis) StartStreamEncryption(input *StartStreamEncryptionInput) (*StartStreamEncryptionOutput, error) {
req, out := c.StartStreamEncryptionRequest(input)
return out, req.Send()
}
// StartStreamEncryptionWithContext is the same as StartStreamEncryption with the addition of
// the ability to pass a context and additional request options.
//
// See StartStreamEncryption for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) StartStreamEncryptionWithContext(ctx aws.Context, input *StartStreamEncryptionInput, opts ...request.Option) (*StartStreamEncryptionOutput, error) {
req, out := c.StartStreamEncryptionRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opStopStreamEncryption = "StopStreamEncryption"
// StopStreamEncryptionRequest generates a "aws/request.Request" representing the
// client's request for the StopStreamEncryption operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See StopStreamEncryption for more information on using the StopStreamEncryption
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the StopStreamEncryptionRequest method.
// req, resp := client.StopStreamEncryptionRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StopStreamEncryption
func (c *Kinesis) StopStreamEncryptionRequest(input *StopStreamEncryptionInput) (req *request.Request, output *StopStreamEncryptionOutput) {
op := &request.Operation{
Name: opStopStreamEncryption,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &StopStreamEncryptionInput{}
}
output = &StopStreamEncryptionOutput{}
req = c.newRequest(op, input, output)
req.Handlers.Unmarshal.Remove(jsonrpc.UnmarshalHandler)
req.Handlers.Unmarshal.PushBackNamed(protocol.UnmarshalDiscardBodyHandler)
return
}
// StopStreamEncryption API operation for Amazon Kinesis.
//
// Disables server-side encryption for a specified stream.
//
// Stopping encryption is an asynchronous operation. Upon receiving the request,
// Amazon Kinesis returns immediately and sets the status of the stream to UPDATING.
// After the update is complete, Amazon Kinesis sets the status of the stream
// back to ACTIVE. Stopping encryption normally takes a few seconds to complete
// but it can take minutes. You can continue to read and write data to your
// stream while its status is UPDATING. Once the status of the stream is ACTIVE
// records written to the stream will no longer be encrypted by the Amazon Kinesis
// Streams service.
//
// API Limits: You can successfully disable server-side encryption 25 times
// in a rolling 24 hour period.
//
// Note: It can take up to 5 seconds after the stream is in an ACTIVE status
// before all records written to the stream are no longer subject to encryption.
// After youve disabled encryption, you can verify encryption was not applied
// by inspecting the API response from PutRecord or PutRecords.
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation StopStreamEncryption for usage and error information.
//
// Returned Error Codes:
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StopStreamEncryption
func (c *Kinesis) StopStreamEncryption(input *StopStreamEncryptionInput) (*StopStreamEncryptionOutput, error) {
req, out := c.StopStreamEncryptionRequest(input)
return out, req.Send()
}
// StopStreamEncryptionWithContext is the same as StopStreamEncryption with the addition of
// the ability to pass a context and additional request options.
//
// See StopStreamEncryption for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) StopStreamEncryptionWithContext(ctx aws.Context, input *StopStreamEncryptionInput, opts ...request.Option) (*StopStreamEncryptionOutput, error) {
req, out := c.StopStreamEncryptionRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
const opUpdateShardCount = "UpdateShardCount"
// UpdateShardCountRequest generates a "aws/request.Request" representing the
// client's request for the UpdateShardCount operation. The "output" return
// value will be populated with the request's response once the request complets
// successfuly.
//
// Use "Send" method on the returned Request to send the API call to the service.
// the "output" return value is not valid until after Send returns without error.
//
// See UpdateShardCount for more information on using the UpdateShardCount
// API call, and error handling.
//
// This method is useful when you want to inject custom logic or configuration
// into the SDK's request lifecycle. Such as custom headers, or retry logic.
//
//
// // Example sending a request using the UpdateShardCountRequest method.
// req, resp := client.UpdateShardCountRequest(params)
//
// err := req.Send()
// if err == nil { // resp is now filled
// fmt.Println(resp)
// }
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/UpdateShardCount
func (c *Kinesis) UpdateShardCountRequest(input *UpdateShardCountInput) (req *request.Request, output *UpdateShardCountOutput) {
op := &request.Operation{
Name: opUpdateShardCount,
HTTPMethod: "POST",
HTTPPath: "/",
}
if input == nil {
input = &UpdateShardCountInput{}
}
output = &UpdateShardCountOutput{}
req = c.newRequest(op, input, output)
return
}
// UpdateShardCount API operation for Amazon Kinesis.
//
// Updates the shard count of the specified stream to the specified number of
// shards.
//
// Updating the shard count is an asynchronous operation. Upon receiving the
// request, Amazon Kinesis returns immediately and sets the status of the stream
// to UPDATING. After the update is complete, Amazon Kinesis sets the status
// of the stream back to ACTIVE. Depending on the size of the stream, the scaling
// action could take a few minutes to complete. You can continue to read and
// write data to your stream while its status is UPDATING.
//
// To update the shard count, Amazon Kinesis performs splits or merges on individual
// shards. This can cause short-lived shards to be created, in addition to the
// final shards. We recommend that you double or halve the shard count, as this
// results in the fewest number of splits or merges.
//
// This operation has the following limits, which are per region per account
// unless otherwise noted:
//
// * scale more than twice per rolling 24 hour period
//
// * scale up above double your current shard count
//
// * scale down below half your current shard count
//
// * scale up above 200 shards in a stream
//
// * scale a stream with more than 200 shards down unless the result is less
// than 200 shards
//
// * scale up above the shard limits for your account
//
// *
//
// For the default limits for an AWS account, see Streams Limits (http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html)in the Amazon Kinesis Streams Developer Guide. If you need to increase a limit, contact AWS Support (http://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html)
//
// Returns awserr.Error for service API and SDK errors. Use runtime type assertions
// with awserr.Error's Code and Message methods to get detailed information about
// the error.
//
// See the AWS API reference guide for Amazon Kinesis's
// API operation UpdateShardCount for usage and error information.
//
// Returned Error Codes:
// * ErrCodeInvalidArgumentException "InvalidArgumentException"
// A specified parameter exceeds its restrictions, is not supported, or can't
// be used. For more information, see the returned message.
//
// * ErrCodeLimitExceededException "LimitExceededException"
// The requested resource exceeds the maximum number allowed, or the number
// of concurrent stream requests exceeds the maximum number allowed (5).
//
// * ErrCodeResourceInUseException "ResourceInUseException"
// The resource is not available for this operation. For successful operation,
// the resource needs to be in the ACTIVE state.
//
// * ErrCodeResourceNotFoundException "ResourceNotFoundException"
// The requested resource could not be found. The stream might not be specified
// correctly.
//
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/UpdateShardCount
func (c *Kinesis) UpdateShardCount(input *UpdateShardCountInput) (*UpdateShardCountOutput, error) {
req, out := c.UpdateShardCountRequest(input)
return out, req.Send()
}
// UpdateShardCountWithContext is the same as UpdateShardCount with the addition of
// the ability to pass a context and additional request options.
//
// See UpdateShardCount for details on how to use this API operation.
//
// The context must be non-nil and will be used for request cancellation. If
// the context is nil a panic will occur. In the future the SDK may create
// sub-contexts for http.Requests. See https://golang.org/pkg/context/
// for more information on using Contexts.
func (c *Kinesis) UpdateShardCountWithContext(ctx aws.Context, input *UpdateShardCountInput, opts ...request.Option) (*UpdateShardCountOutput, error) {
req, out := c.UpdateShardCountRequest(input)
req.SetContext(ctx)
req.ApplyOptions(opts...)
return out, req.Send()
}
// Represents the input for AddTagsToStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/AddTagsToStreamInput
type AddTagsToStreamInput struct {
_ struct{} `type:"structure"`
// The name of the stream.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
// The set of key-value pairs to use to create the tags.
//
// Tags is a required field
Tags map[string]*string `min:"1" type:"map" required:"true"`
}
// String returns the string representation
func (s AddTagsToStreamInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s AddTagsToStreamInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *AddTagsToStreamInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "AddTagsToStreamInput"}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if s.Tags == nil {
invalidParams.Add(request.NewErrParamRequired("Tags"))
}
if s.Tags != nil && len(s.Tags) < 1 {
invalidParams.Add(request.NewErrParamMinLen("Tags", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetStreamName sets the StreamName field's value.
func (s *AddTagsToStreamInput) SetStreamName(v string) *AddTagsToStreamInput {
s.StreamName = &v
return s
}
// SetTags sets the Tags field's value.
func (s *AddTagsToStreamInput) SetTags(v map[string]*string) *AddTagsToStreamInput {
s.Tags = v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/AddTagsToStreamOutput
type AddTagsToStreamOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s AddTagsToStreamOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s AddTagsToStreamOutput) GoString() string {
return s.String()
}
// Represents the input for CreateStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/CreateStreamInput
type CreateStreamInput struct {
_ struct{} `type:"structure"`
// The number of shards that the stream will use. The throughput of the stream
// is a function of the number of shards; more shards are required for greater
// provisioned throughput.
//
// DefaultShardLimit;
//
// ShardCount is a required field
ShardCount *int64 `min:"1" type:"integer" required:"true"`
// A name to identify the stream. The stream name is scoped to the AWS account
// used by the application that creates the stream. It is also scoped by region.
// That is, two streams in two different AWS accounts can have the same name,
// and two streams in the same AWS account but in two different regions can
// have the same name.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s CreateStreamInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s CreateStreamInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *CreateStreamInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "CreateStreamInput"}
if s.ShardCount == nil {
invalidParams.Add(request.NewErrParamRequired("ShardCount"))
}
if s.ShardCount != nil && *s.ShardCount < 1 {
invalidParams.Add(request.NewErrParamMinValue("ShardCount", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetShardCount sets the ShardCount field's value.
func (s *CreateStreamInput) SetShardCount(v int64) *CreateStreamInput {
s.ShardCount = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *CreateStreamInput) SetStreamName(v string) *CreateStreamInput {
s.StreamName = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/CreateStreamOutput
type CreateStreamOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s CreateStreamOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s CreateStreamOutput) GoString() string {
return s.String()
}
// Represents the input for DecreaseStreamRetentionPeriod.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DecreaseStreamRetentionPeriodInput
type DecreaseStreamRetentionPeriodInput struct {
_ struct{} `type:"structure"`
// The new retention period of the stream, in hours. Must be less than the current
// retention period.
//
// RetentionPeriodHours is a required field
RetentionPeriodHours *int64 `min:"1" type:"integer" required:"true"`
// The name of the stream to modify.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s DecreaseStreamRetentionPeriodInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DecreaseStreamRetentionPeriodInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *DecreaseStreamRetentionPeriodInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "DecreaseStreamRetentionPeriodInput"}
if s.RetentionPeriodHours == nil {
invalidParams.Add(request.NewErrParamRequired("RetentionPeriodHours"))
}
if s.RetentionPeriodHours != nil && *s.RetentionPeriodHours < 1 {
invalidParams.Add(request.NewErrParamMinValue("RetentionPeriodHours", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetRetentionPeriodHours sets the RetentionPeriodHours field's value.
func (s *DecreaseStreamRetentionPeriodInput) SetRetentionPeriodHours(v int64) *DecreaseStreamRetentionPeriodInput {
s.RetentionPeriodHours = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *DecreaseStreamRetentionPeriodInput) SetStreamName(v string) *DecreaseStreamRetentionPeriodInput {
s.StreamName = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DecreaseStreamRetentionPeriodOutput
type DecreaseStreamRetentionPeriodOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s DecreaseStreamRetentionPeriodOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DecreaseStreamRetentionPeriodOutput) GoString() string {
return s.String()
}
// Represents the input for DeleteStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DeleteStreamInput
type DeleteStreamInput struct {
_ struct{} `type:"structure"`
// The name of the stream to delete.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s DeleteStreamInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DeleteStreamInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *DeleteStreamInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "DeleteStreamInput"}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetStreamName sets the StreamName field's value.
func (s *DeleteStreamInput) SetStreamName(v string) *DeleteStreamInput {
s.StreamName = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DeleteStreamOutput
type DeleteStreamOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s DeleteStreamOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DeleteStreamOutput) GoString() string {
return s.String()
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DescribeLimitsInput
type DescribeLimitsInput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s DescribeLimitsInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DescribeLimitsInput) GoString() string {
return s.String()
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DescribeLimitsOutput
type DescribeLimitsOutput struct {
_ struct{} `type:"structure"`
// The number of open shards.
//
// OpenShardCount is a required field
OpenShardCount *int64 `type:"integer" required:"true"`
// The maximum number of shards.
//
// ShardLimit is a required field
ShardLimit *int64 `type:"integer" required:"true"`
}
// String returns the string representation
func (s DescribeLimitsOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DescribeLimitsOutput) GoString() string {
return s.String()
}
// SetOpenShardCount sets the OpenShardCount field's value.
func (s *DescribeLimitsOutput) SetOpenShardCount(v int64) *DescribeLimitsOutput {
s.OpenShardCount = &v
return s
}
// SetShardLimit sets the ShardLimit field's value.
func (s *DescribeLimitsOutput) SetShardLimit(v int64) *DescribeLimitsOutput {
s.ShardLimit = &v
return s
}
// Represents the input for DescribeStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DescribeStreamInput
type DescribeStreamInput struct {
_ struct{} `type:"structure"`
// The shard ID of the shard to start with.
ExclusiveStartShardId *string `min:"1" type:"string"`
// The maximum number of shards to return in a single call. The default value
// is 100. If you specify a value greater than 100, at most 100 shards are returned.
Limit *int64 `min:"1" type:"integer"`
// The name of the stream to describe.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s DescribeStreamInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DescribeStreamInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *DescribeStreamInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "DescribeStreamInput"}
if s.ExclusiveStartShardId != nil && len(*s.ExclusiveStartShardId) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ExclusiveStartShardId", 1))
}
if s.Limit != nil && *s.Limit < 1 {
invalidParams.Add(request.NewErrParamMinValue("Limit", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetExclusiveStartShardId sets the ExclusiveStartShardId field's value.
func (s *DescribeStreamInput) SetExclusiveStartShardId(v string) *DescribeStreamInput {
s.ExclusiveStartShardId = &v
return s
}
// SetLimit sets the Limit field's value.
func (s *DescribeStreamInput) SetLimit(v int64) *DescribeStreamInput {
s.Limit = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *DescribeStreamInput) SetStreamName(v string) *DescribeStreamInput {
s.StreamName = &v
return s
}
// Represents the output for DescribeStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DescribeStreamOutput
type DescribeStreamOutput struct {
_ struct{} `type:"structure"`
// The current status of the stream, the stream ARN, an array of shard objects
// that comprise the stream, and whether there are more shards available.
//
// StreamDescription is a required field
StreamDescription *StreamDescription `type:"structure" required:"true"`
}
// String returns the string representation
func (s DescribeStreamOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DescribeStreamOutput) GoString() string {
return s.String()
}
// SetStreamDescription sets the StreamDescription field's value.
func (s *DescribeStreamOutput) SetStreamDescription(v *StreamDescription) *DescribeStreamOutput {
s.StreamDescription = v
return s
}
// Represents the input for DisableEnhancedMonitoring.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/DisableEnhancedMonitoringInput
type DisableEnhancedMonitoringInput struct {
_ struct{} `type:"structure"`
// List of shard-level metrics to disable.
//
// The following are the valid shard-level metrics. The value "ALL" disables
// every metric.
//
// * IncomingBytes
//
// * IncomingRecords
//
// * OutgoingBytes
//
// * OutgoingRecords
//
// * WriteProvisionedThroughputExceeded
//
// * ReadProvisionedThroughputExceeded
//
// * IteratorAgeMilliseconds
//
// * ALL
//
// For more information, see Monitoring the Amazon Kinesis Streams Service with
// Amazon CloudWatch (http://docs.aws.amazon.com/kinesis/latest/dev/monitoring-with-cloudwatch.html)
// in the Amazon Kinesis Streams Developer Guide.
//
// ShardLevelMetrics is a required field
ShardLevelMetrics []*string `min:"1" type:"list" required:"true"`
// The name of the Amazon Kinesis stream for which to disable enhanced monitoring.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s DisableEnhancedMonitoringInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s DisableEnhancedMonitoringInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *DisableEnhancedMonitoringInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "DisableEnhancedMonitoringInput"}
if s.ShardLevelMetrics == nil {
invalidParams.Add(request.NewErrParamRequired("ShardLevelMetrics"))
}
if s.ShardLevelMetrics != nil && len(s.ShardLevelMetrics) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ShardLevelMetrics", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetShardLevelMetrics sets the ShardLevelMetrics field's value.
func (s *DisableEnhancedMonitoringInput) SetShardLevelMetrics(v []*string) *DisableEnhancedMonitoringInput {
s.ShardLevelMetrics = v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *DisableEnhancedMonitoringInput) SetStreamName(v string) *DisableEnhancedMonitoringInput {
s.StreamName = &v
return s
}
// Represents the input for EnableEnhancedMonitoring.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/EnableEnhancedMonitoringInput
type EnableEnhancedMonitoringInput struct {
_ struct{} `type:"structure"`
// List of shard-level metrics to enable.
//
// The following are the valid shard-level metrics. The value "ALL" enables
// every metric.
//
// * IncomingBytes
//
// * IncomingRecords
//
// * OutgoingBytes
//
// * OutgoingRecords
//
// * WriteProvisionedThroughputExceeded
//
// * ReadProvisionedThroughputExceeded
//
// * IteratorAgeMilliseconds
//
// * ALL
//
// For more information, see Monitoring the Amazon Kinesis Streams Service with
// Amazon CloudWatch (http://docs.aws.amazon.com/kinesis/latest/dev/monitoring-with-cloudwatch.html)
// in the Amazon Kinesis Streams Developer Guide.
//
// ShardLevelMetrics is a required field
ShardLevelMetrics []*string `min:"1" type:"list" required:"true"`
// The name of the stream for which to enable enhanced monitoring.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s EnableEnhancedMonitoringInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s EnableEnhancedMonitoringInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *EnableEnhancedMonitoringInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "EnableEnhancedMonitoringInput"}
if s.ShardLevelMetrics == nil {
invalidParams.Add(request.NewErrParamRequired("ShardLevelMetrics"))
}
if s.ShardLevelMetrics != nil && len(s.ShardLevelMetrics) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ShardLevelMetrics", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetShardLevelMetrics sets the ShardLevelMetrics field's value.
func (s *EnableEnhancedMonitoringInput) SetShardLevelMetrics(v []*string) *EnableEnhancedMonitoringInput {
s.ShardLevelMetrics = v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *EnableEnhancedMonitoringInput) SetStreamName(v string) *EnableEnhancedMonitoringInput {
s.StreamName = &v
return s
}
// Represents enhanced metrics types.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/EnhancedMetrics
type EnhancedMetrics struct {
_ struct{} `type:"structure"`
// List of shard-level metrics.
//
// The following are the valid shard-level metrics. The value "ALL" enhances
// every metric.
//
// * IncomingBytes
//
// * IncomingRecords
//
// * OutgoingBytes
//
// * OutgoingRecords
//
// * WriteProvisionedThroughputExceeded
//
// * ReadProvisionedThroughputExceeded
//
// * IteratorAgeMilliseconds
//
// * ALL
//
// For more information, see Monitoring the Amazon Kinesis Streams Service with
// Amazon CloudWatch (http://docs.aws.amazon.com/kinesis/latest/dev/monitoring-with-cloudwatch.html)
// in the Amazon Kinesis Streams Developer Guide.
ShardLevelMetrics []*string `min:"1" type:"list"`
}
// String returns the string representation
func (s EnhancedMetrics) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s EnhancedMetrics) GoString() string {
return s.String()
}
// SetShardLevelMetrics sets the ShardLevelMetrics field's value.
func (s *EnhancedMetrics) SetShardLevelMetrics(v []*string) *EnhancedMetrics {
s.ShardLevelMetrics = v
return s
}
// Represents the output for EnableEnhancedMonitoring and DisableEnhancedMonitoring.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/EnhancedMonitoringOutput
type EnhancedMonitoringOutput struct {
_ struct{} `type:"structure"`
// Represents the current state of the metrics that are in the enhanced state
// before the operation.
CurrentShardLevelMetrics []*string `min:"1" type:"list"`
// Represents the list of all the metrics that would be in the enhanced state
// after the operation.
DesiredShardLevelMetrics []*string `min:"1" type:"list"`
// The name of the Amazon Kinesis stream.
StreamName *string `min:"1" type:"string"`
}
// String returns the string representation
func (s EnhancedMonitoringOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s EnhancedMonitoringOutput) GoString() string {
return s.String()
}
// SetCurrentShardLevelMetrics sets the CurrentShardLevelMetrics field's value.
func (s *EnhancedMonitoringOutput) SetCurrentShardLevelMetrics(v []*string) *EnhancedMonitoringOutput {
s.CurrentShardLevelMetrics = v
return s
}
// SetDesiredShardLevelMetrics sets the DesiredShardLevelMetrics field's value.
func (s *EnhancedMonitoringOutput) SetDesiredShardLevelMetrics(v []*string) *EnhancedMonitoringOutput {
s.DesiredShardLevelMetrics = v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *EnhancedMonitoringOutput) SetStreamName(v string) *EnhancedMonitoringOutput {
s.StreamName = &v
return s
}
// Represents the input for GetRecords.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/GetRecordsInput
type GetRecordsInput struct {
_ struct{} `type:"structure"`
// The maximum number of records to return. Specify a value of up to 10,000.
// If you specify a value that is greater than 10,000, GetRecords throws InvalidArgumentException.
Limit *int64 `min:"1" type:"integer"`
// The position in the shard from which you want to start sequentially reading
// data records. A shard iterator specifies this position using the sequence
// number of a data record in the shard.
//
// ShardIterator is a required field
ShardIterator *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s GetRecordsInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s GetRecordsInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *GetRecordsInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "GetRecordsInput"}
if s.Limit != nil && *s.Limit < 1 {
invalidParams.Add(request.NewErrParamMinValue("Limit", 1))
}
if s.ShardIterator == nil {
invalidParams.Add(request.NewErrParamRequired("ShardIterator"))
}
if s.ShardIterator != nil && len(*s.ShardIterator) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ShardIterator", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetLimit sets the Limit field's value.
func (s *GetRecordsInput) SetLimit(v int64) *GetRecordsInput {
s.Limit = &v
return s
}
// SetShardIterator sets the ShardIterator field's value.
func (s *GetRecordsInput) SetShardIterator(v string) *GetRecordsInput {
s.ShardIterator = &v
return s
}
// Represents the output for GetRecords.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/GetRecordsOutput
type GetRecordsOutput struct {
_ struct{} `type:"structure"`
// The number of milliseconds the GetRecords response is from the tip of the
// stream, indicating how far behind current time the consumer is. A value of
// zero indicates record processing is caught up, and there are no new records
// to process at this moment.
MillisBehindLatest *int64 `type:"long"`
// The next position in the shard from which to start sequentially reading data
// records. If set to null, the shard has been closed and the requested iterator
// will not return any more data.
NextShardIterator *string `min:"1" type:"string"`
// The data records retrieved from the shard.
//
// Records is a required field
Records []*Record `type:"list" required:"true"`
}
// String returns the string representation
func (s GetRecordsOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s GetRecordsOutput) GoString() string {
return s.String()
}
// SetMillisBehindLatest sets the MillisBehindLatest field's value.
func (s *GetRecordsOutput) SetMillisBehindLatest(v int64) *GetRecordsOutput {
s.MillisBehindLatest = &v
return s
}
// SetNextShardIterator sets the NextShardIterator field's value.
func (s *GetRecordsOutput) SetNextShardIterator(v string) *GetRecordsOutput {
s.NextShardIterator = &v
return s
}
// SetRecords sets the Records field's value.
func (s *GetRecordsOutput) SetRecords(v []*Record) *GetRecordsOutput {
s.Records = v
return s
}
// Represents the input for GetShardIterator.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/GetShardIteratorInput
type GetShardIteratorInput struct {
_ struct{} `type:"structure"`
// The shard ID of the Amazon Kinesis shard to get the iterator for.
//
// ShardId is a required field
ShardId *string `min:"1" type:"string" required:"true"`
// Determines how the shard iterator is used to start reading data records from
// the shard.
//
// The following are the valid Amazon Kinesis shard iterator types:
//
// * AT_SEQUENCE_NUMBER - Start reading from the position denoted by a specific
// sequence number, provided in the value StartingSequenceNumber.
//
// * AFTER_SEQUENCE_NUMBER - Start reading right after the position denoted
// by a specific sequence number, provided in the value StartingSequenceNumber.
//
// * AT_TIMESTAMP - Start reading from the position denoted by a specific
// timestamp, provided in the value Timestamp.
//
// * TRIM_HORIZON - Start reading at the last untrimmed record in the shard
// in the system, which is the oldest data record in the shard.
//
// * LATEST - Start reading just after the most recent record in the shard,
// so that you always read the most recent data in the shard.
//
// ShardIteratorType is a required field
ShardIteratorType *string `type:"string" required:"true" enum:"ShardIteratorType"`
// The sequence number of the data record in the shard from which to start reading.
// Used with shard iterator type AT_SEQUENCE_NUMBER and AFTER_SEQUENCE_NUMBER.
StartingSequenceNumber *string `type:"string"`
// The name of the Amazon Kinesis stream.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
// The timestamp of the data record from which to start reading. Used with shard
// iterator type AT_TIMESTAMP. A timestamp is the Unix epoch date with precision
// in milliseconds. For example, 2016-04-04T19:58:46.480-00:00 or 1459799926.480.
// If a record with this exact timestamp does not exist, the iterator returned
// is for the next (later) record. If the timestamp is older than the current
// trim horizon, the iterator returned is for the oldest untrimmed data record
// (TRIM_HORIZON).
Timestamp *time.Time `type:"timestamp" timestampFormat:"unix"`
}
// String returns the string representation
func (s GetShardIteratorInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s GetShardIteratorInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *GetShardIteratorInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "GetShardIteratorInput"}
if s.ShardId == nil {
invalidParams.Add(request.NewErrParamRequired("ShardId"))
}
if s.ShardId != nil && len(*s.ShardId) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ShardId", 1))
}
if s.ShardIteratorType == nil {
invalidParams.Add(request.NewErrParamRequired("ShardIteratorType"))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetShardId sets the ShardId field's value.
func (s *GetShardIteratorInput) SetShardId(v string) *GetShardIteratorInput {
s.ShardId = &v
return s
}
// SetShardIteratorType sets the ShardIteratorType field's value.
func (s *GetShardIteratorInput) SetShardIteratorType(v string) *GetShardIteratorInput {
s.ShardIteratorType = &v
return s
}
// SetStartingSequenceNumber sets the StartingSequenceNumber field's value.
func (s *GetShardIteratorInput) SetStartingSequenceNumber(v string) *GetShardIteratorInput {
s.StartingSequenceNumber = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *GetShardIteratorInput) SetStreamName(v string) *GetShardIteratorInput {
s.StreamName = &v
return s
}
// SetTimestamp sets the Timestamp field's value.
func (s *GetShardIteratorInput) SetTimestamp(v time.Time) *GetShardIteratorInput {
s.Timestamp = &v
return s
}
// Represents the output for GetShardIterator.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/GetShardIteratorOutput
type GetShardIteratorOutput struct {
_ struct{} `type:"structure"`
// The position in the shard from which to start reading data records sequentially.
// A shard iterator specifies this position using the sequence number of a data
// record in a shard.
ShardIterator *string `min:"1" type:"string"`
}
// String returns the string representation
func (s GetShardIteratorOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s GetShardIteratorOutput) GoString() string {
return s.String()
}
// SetShardIterator sets the ShardIterator field's value.
func (s *GetShardIteratorOutput) SetShardIterator(v string) *GetShardIteratorOutput {
s.ShardIterator = &v
return s
}
// The range of possible hash key values for the shard, which is a set of ordered
// contiguous positive integers.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/HashKeyRange
type HashKeyRange struct {
_ struct{} `type:"structure"`
// The ending hash key of the hash key range.
//
// EndingHashKey is a required field
EndingHashKey *string `type:"string" required:"true"`
// The starting hash key of the hash key range.
//
// StartingHashKey is a required field
StartingHashKey *string `type:"string" required:"true"`
}
// String returns the string representation
func (s HashKeyRange) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s HashKeyRange) GoString() string {
return s.String()
}
// SetEndingHashKey sets the EndingHashKey field's value.
func (s *HashKeyRange) SetEndingHashKey(v string) *HashKeyRange {
s.EndingHashKey = &v
return s
}
// SetStartingHashKey sets the StartingHashKey field's value.
func (s *HashKeyRange) SetStartingHashKey(v string) *HashKeyRange {
s.StartingHashKey = &v
return s
}
// Represents the input for IncreaseStreamRetentionPeriod.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/IncreaseStreamRetentionPeriodInput
type IncreaseStreamRetentionPeriodInput struct {
_ struct{} `type:"structure"`
// The new retention period of the stream, in hours. Must be more than the current
// retention period.
//
// RetentionPeriodHours is a required field
RetentionPeriodHours *int64 `min:"1" type:"integer" required:"true"`
// The name of the stream to modify.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s IncreaseStreamRetentionPeriodInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s IncreaseStreamRetentionPeriodInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *IncreaseStreamRetentionPeriodInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "IncreaseStreamRetentionPeriodInput"}
if s.RetentionPeriodHours == nil {
invalidParams.Add(request.NewErrParamRequired("RetentionPeriodHours"))
}
if s.RetentionPeriodHours != nil && *s.RetentionPeriodHours < 1 {
invalidParams.Add(request.NewErrParamMinValue("RetentionPeriodHours", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetRetentionPeriodHours sets the RetentionPeriodHours field's value.
func (s *IncreaseStreamRetentionPeriodInput) SetRetentionPeriodHours(v int64) *IncreaseStreamRetentionPeriodInput {
s.RetentionPeriodHours = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *IncreaseStreamRetentionPeriodInput) SetStreamName(v string) *IncreaseStreamRetentionPeriodInput {
s.StreamName = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/IncreaseStreamRetentionPeriodOutput
type IncreaseStreamRetentionPeriodOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s IncreaseStreamRetentionPeriodOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s IncreaseStreamRetentionPeriodOutput) GoString() string {
return s.String()
}
// Represents the input for ListStreams.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/ListStreamsInput
type ListStreamsInput struct {
_ struct{} `type:"structure"`
// The name of the stream to start the list with.
ExclusiveStartStreamName *string `min:"1" type:"string"`
// The maximum number of streams to list.
Limit *int64 `min:"1" type:"integer"`
}
// String returns the string representation
func (s ListStreamsInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s ListStreamsInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *ListStreamsInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "ListStreamsInput"}
if s.ExclusiveStartStreamName != nil && len(*s.ExclusiveStartStreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ExclusiveStartStreamName", 1))
}
if s.Limit != nil && *s.Limit < 1 {
invalidParams.Add(request.NewErrParamMinValue("Limit", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetExclusiveStartStreamName sets the ExclusiveStartStreamName field's value.
func (s *ListStreamsInput) SetExclusiveStartStreamName(v string) *ListStreamsInput {
s.ExclusiveStartStreamName = &v
return s
}
// SetLimit sets the Limit field's value.
func (s *ListStreamsInput) SetLimit(v int64) *ListStreamsInput {
s.Limit = &v
return s
}
// Represents the output for ListStreams.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/ListStreamsOutput
type ListStreamsOutput struct {
_ struct{} `type:"structure"`
// If set to true, there are more streams available to list.
//
// HasMoreStreams is a required field
HasMoreStreams *bool `type:"boolean" required:"true"`
// The names of the streams that are associated with the AWS account making
// the ListStreams request.
//
// StreamNames is a required field
StreamNames []*string `type:"list" required:"true"`
}
// String returns the string representation
func (s ListStreamsOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s ListStreamsOutput) GoString() string {
return s.String()
}
// SetHasMoreStreams sets the HasMoreStreams field's value.
func (s *ListStreamsOutput) SetHasMoreStreams(v bool) *ListStreamsOutput {
s.HasMoreStreams = &v
return s
}
// SetStreamNames sets the StreamNames field's value.
func (s *ListStreamsOutput) SetStreamNames(v []*string) *ListStreamsOutput {
s.StreamNames = v
return s
}
// Represents the input for ListTagsForStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/ListTagsForStreamInput
type ListTagsForStreamInput struct {
_ struct{} `type:"structure"`
// The key to use as the starting point for the list of tags. If this parameter
// is set, ListTagsForStream gets all tags that occur after ExclusiveStartTagKey.
ExclusiveStartTagKey *string `min:"1" type:"string"`
// The number of tags to return. If this number is less than the total number
// of tags associated with the stream, HasMoreTags is set to true. To list additional
// tags, set ExclusiveStartTagKey to the last key in the response.
Limit *int64 `min:"1" type:"integer"`
// The name of the stream.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s ListTagsForStreamInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s ListTagsForStreamInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *ListTagsForStreamInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "ListTagsForStreamInput"}
if s.ExclusiveStartTagKey != nil && len(*s.ExclusiveStartTagKey) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ExclusiveStartTagKey", 1))
}
if s.Limit != nil && *s.Limit < 1 {
invalidParams.Add(request.NewErrParamMinValue("Limit", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetExclusiveStartTagKey sets the ExclusiveStartTagKey field's value.
func (s *ListTagsForStreamInput) SetExclusiveStartTagKey(v string) *ListTagsForStreamInput {
s.ExclusiveStartTagKey = &v
return s
}
// SetLimit sets the Limit field's value.
func (s *ListTagsForStreamInput) SetLimit(v int64) *ListTagsForStreamInput {
s.Limit = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *ListTagsForStreamInput) SetStreamName(v string) *ListTagsForStreamInput {
s.StreamName = &v
return s
}
// Represents the output for ListTagsForStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/ListTagsForStreamOutput
type ListTagsForStreamOutput struct {
_ struct{} `type:"structure"`
// If set to true, more tags are available. To request additional tags, set
// ExclusiveStartTagKey to the key of the last tag returned.
//
// HasMoreTags is a required field
HasMoreTags *bool `type:"boolean" required:"true"`
// A list of tags associated with StreamName, starting with the first tag after
// ExclusiveStartTagKey and up to the specified Limit.
//
// Tags is a required field
Tags []*Tag `type:"list" required:"true"`
}
// String returns the string representation
func (s ListTagsForStreamOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s ListTagsForStreamOutput) GoString() string {
return s.String()
}
// SetHasMoreTags sets the HasMoreTags field's value.
func (s *ListTagsForStreamOutput) SetHasMoreTags(v bool) *ListTagsForStreamOutput {
s.HasMoreTags = &v
return s
}
// SetTags sets the Tags field's value.
func (s *ListTagsForStreamOutput) SetTags(v []*Tag) *ListTagsForStreamOutput {
s.Tags = v
return s
}
// Represents the input for MergeShards.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/MergeShardsInput
type MergeShardsInput struct {
_ struct{} `type:"structure"`
// The shard ID of the adjacent shard for the merge.
//
// AdjacentShardToMerge is a required field
AdjacentShardToMerge *string `min:"1" type:"string" required:"true"`
// The shard ID of the shard to combine with the adjacent shard for the merge.
//
// ShardToMerge is a required field
ShardToMerge *string `min:"1" type:"string" required:"true"`
// The name of the stream for the merge.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s MergeShardsInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s MergeShardsInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *MergeShardsInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "MergeShardsInput"}
if s.AdjacentShardToMerge == nil {
invalidParams.Add(request.NewErrParamRequired("AdjacentShardToMerge"))
}
if s.AdjacentShardToMerge != nil && len(*s.AdjacentShardToMerge) < 1 {
invalidParams.Add(request.NewErrParamMinLen("AdjacentShardToMerge", 1))
}
if s.ShardToMerge == nil {
invalidParams.Add(request.NewErrParamRequired("ShardToMerge"))
}
if s.ShardToMerge != nil && len(*s.ShardToMerge) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ShardToMerge", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetAdjacentShardToMerge sets the AdjacentShardToMerge field's value.
func (s *MergeShardsInput) SetAdjacentShardToMerge(v string) *MergeShardsInput {
s.AdjacentShardToMerge = &v
return s
}
// SetShardToMerge sets the ShardToMerge field's value.
func (s *MergeShardsInput) SetShardToMerge(v string) *MergeShardsInput {
s.ShardToMerge = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *MergeShardsInput) SetStreamName(v string) *MergeShardsInput {
s.StreamName = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/MergeShardsOutput
type MergeShardsOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s MergeShardsOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s MergeShardsOutput) GoString() string {
return s.String()
}
// Represents the input for PutRecord.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecordInput
type PutRecordInput struct {
_ struct{} `type:"structure"`
// The data blob to put into the record, which is base64-encoded when the blob
// is serialized. When the data blob (the payload before base64-encoding) is
// added to the partition key size, the total size must not exceed the maximum
// record size (1 MB).
//
// Data is automatically base64 encoded/decoded by the SDK.
//
// Data is a required field
Data []byte `type:"blob" required:"true"`
// The hash value used to explicitly determine the shard the data record is
// assigned to by overriding the partition key hash.
ExplicitHashKey *string `type:"string"`
// Determines which shard in the stream the data record is assigned to. Partition
// keys are Unicode strings with a maximum length limit of 256 characters for
// each key. Amazon Kinesis uses the partition key as input to a hash function
// that maps the partition key and associated data to a specific shard. Specifically,
// an MD5 hash function is used to map partition keys to 128-bit integer values
// and to map associated data records to shards. As a result of this hashing
// mechanism, all data records with the same partition key map to the same shard
// within the stream.
//
// PartitionKey is a required field
PartitionKey *string `min:"1" type:"string" required:"true"`
// Guarantees strictly increasing sequence numbers, for puts from the same client
// and to the same partition key. Usage: set the SequenceNumberForOrdering of
// record n to the sequence number of record n-1 (as returned in the result
// when putting record n-1). If this parameter is not set, records will be coarsely
// ordered based on arrival time.
SequenceNumberForOrdering *string `type:"string"`
// The name of the stream to put the data record into.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s PutRecordInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s PutRecordInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *PutRecordInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "PutRecordInput"}
if s.Data == nil {
invalidParams.Add(request.NewErrParamRequired("Data"))
}
if s.PartitionKey == nil {
invalidParams.Add(request.NewErrParamRequired("PartitionKey"))
}
if s.PartitionKey != nil && len(*s.PartitionKey) < 1 {
invalidParams.Add(request.NewErrParamMinLen("PartitionKey", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetData sets the Data field's value.
func (s *PutRecordInput) SetData(v []byte) *PutRecordInput {
s.Data = v
return s
}
// SetExplicitHashKey sets the ExplicitHashKey field's value.
func (s *PutRecordInput) SetExplicitHashKey(v string) *PutRecordInput {
s.ExplicitHashKey = &v
return s
}
// SetPartitionKey sets the PartitionKey field's value.
func (s *PutRecordInput) SetPartitionKey(v string) *PutRecordInput {
s.PartitionKey = &v
return s
}
// SetSequenceNumberForOrdering sets the SequenceNumberForOrdering field's value.
func (s *PutRecordInput) SetSequenceNumberForOrdering(v string) *PutRecordInput {
s.SequenceNumberForOrdering = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *PutRecordInput) SetStreamName(v string) *PutRecordInput {
s.StreamName = &v
return s
}
// Represents the output for PutRecord.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecordOutput
type PutRecordOutput struct {
_ struct{} `type:"structure"`
// The encryption type to use on the record. This parameter can be one of the
// following values:
//
// * NONE: Do not encrypt the records in the stream.
//
// * KMS: Use server-side encryption on the records in the stream using a
// customer-managed KMS key.
EncryptionType *string `type:"string" enum:"EncryptionType"`
// The sequence number identifier that was assigned to the put data record.
// The sequence number for the record is unique across all records in the stream.
// A sequence number is the identifier associated with every record put into
// the stream.
//
// SequenceNumber is a required field
SequenceNumber *string `type:"string" required:"true"`
// The shard ID of the shard where the data record was placed.
//
// ShardId is a required field
ShardId *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s PutRecordOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s PutRecordOutput) GoString() string {
return s.String()
}
// SetEncryptionType sets the EncryptionType field's value.
func (s *PutRecordOutput) SetEncryptionType(v string) *PutRecordOutput {
s.EncryptionType = &v
return s
}
// SetSequenceNumber sets the SequenceNumber field's value.
func (s *PutRecordOutput) SetSequenceNumber(v string) *PutRecordOutput {
s.SequenceNumber = &v
return s
}
// SetShardId sets the ShardId field's value.
func (s *PutRecordOutput) SetShardId(v string) *PutRecordOutput {
s.ShardId = &v
return s
}
// A PutRecords request.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecordsInput
type PutRecordsInput struct {
_ struct{} `type:"structure"`
// The records associated with the request.
//
// Records is a required field
Records []*PutRecordsRequestEntry `min:"1" type:"list" required:"true"`
// The stream name associated with the request.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s PutRecordsInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s PutRecordsInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *PutRecordsInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "PutRecordsInput"}
if s.Records == nil {
invalidParams.Add(request.NewErrParamRequired("Records"))
}
if s.Records != nil && len(s.Records) < 1 {
invalidParams.Add(request.NewErrParamMinLen("Records", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if s.Records != nil {
for i, v := range s.Records {
if v == nil {
continue
}
if err := v.Validate(); err != nil {
invalidParams.AddNested(fmt.Sprintf("%s[%v]", "Records", i), err.(request.ErrInvalidParams))
}
}
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetRecords sets the Records field's value.
func (s *PutRecordsInput) SetRecords(v []*PutRecordsRequestEntry) *PutRecordsInput {
s.Records = v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *PutRecordsInput) SetStreamName(v string) *PutRecordsInput {
s.StreamName = &v
return s
}
// PutRecords results.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecordsOutput
type PutRecordsOutput struct {
_ struct{} `type:"structure"`
// The encryption type used on the records. This parameter can be one of the
// following values:
//
// * NONE: Do not encrypt the records.
//
// * KMS: Use server-side encryption on the records using a customer-managed
// KMS key.
EncryptionType *string `type:"string" enum:"EncryptionType"`
// The number of unsuccessfully processed records in a PutRecords request.
FailedRecordCount *int64 `min:"1" type:"integer"`
// An array of successfully and unsuccessfully processed record results, correlated
// with the request by natural ordering. A record that is successfully added
// to a stream includes SequenceNumber and ShardId in the result. A record that
// fails to be added to a stream includes ErrorCode and ErrorMessage in the
// result.
//
// Records is a required field
Records []*PutRecordsResultEntry `min:"1" type:"list" required:"true"`
}
// String returns the string representation
func (s PutRecordsOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s PutRecordsOutput) GoString() string {
return s.String()
}
// SetEncryptionType sets the EncryptionType field's value.
func (s *PutRecordsOutput) SetEncryptionType(v string) *PutRecordsOutput {
s.EncryptionType = &v
return s
}
// SetFailedRecordCount sets the FailedRecordCount field's value.
func (s *PutRecordsOutput) SetFailedRecordCount(v int64) *PutRecordsOutput {
s.FailedRecordCount = &v
return s
}
// SetRecords sets the Records field's value.
func (s *PutRecordsOutput) SetRecords(v []*PutRecordsResultEntry) *PutRecordsOutput {
s.Records = v
return s
}
// Represents the output for PutRecords.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecordsRequestEntry
type PutRecordsRequestEntry struct {
_ struct{} `type:"structure"`
// The data blob to put into the record, which is base64-encoded when the blob
// is serialized. When the data blob (the payload before base64-encoding) is
// added to the partition key size, the total size must not exceed the maximum
// record size (1 MB).
//
// Data is automatically base64 encoded/decoded by the SDK.
//
// Data is a required field
Data []byte `type:"blob" required:"true"`
// The hash value used to determine explicitly the shard that the data record
// is assigned to by overriding the partition key hash.
ExplicitHashKey *string `type:"string"`
// Determines which shard in the stream the data record is assigned to. Partition
// keys are Unicode strings with a maximum length limit of 256 characters for
// each key. Amazon Kinesis uses the partition key as input to a hash function
// that maps the partition key and associated data to a specific shard. Specifically,
// an MD5 hash function is used to map partition keys to 128-bit integer values
// and to map associated data records to shards. As a result of this hashing
// mechanism, all data records with the same partition key map to the same shard
// within the stream.
//
// PartitionKey is a required field
PartitionKey *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s PutRecordsRequestEntry) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s PutRecordsRequestEntry) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *PutRecordsRequestEntry) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "PutRecordsRequestEntry"}
if s.Data == nil {
invalidParams.Add(request.NewErrParamRequired("Data"))
}
if s.PartitionKey == nil {
invalidParams.Add(request.NewErrParamRequired("PartitionKey"))
}
if s.PartitionKey != nil && len(*s.PartitionKey) < 1 {
invalidParams.Add(request.NewErrParamMinLen("PartitionKey", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetData sets the Data field's value.
func (s *PutRecordsRequestEntry) SetData(v []byte) *PutRecordsRequestEntry {
s.Data = v
return s
}
// SetExplicitHashKey sets the ExplicitHashKey field's value.
func (s *PutRecordsRequestEntry) SetExplicitHashKey(v string) *PutRecordsRequestEntry {
s.ExplicitHashKey = &v
return s
}
// SetPartitionKey sets the PartitionKey field's value.
func (s *PutRecordsRequestEntry) SetPartitionKey(v string) *PutRecordsRequestEntry {
s.PartitionKey = &v
return s
}
// Represents the result of an individual record from a PutRecords request.
// A record that is successfully added to a stream includes SequenceNumber and
// ShardId in the result. A record that fails to be added to the stream includes
// ErrorCode and ErrorMessage in the result.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/PutRecordsResultEntry
type PutRecordsResultEntry struct {
_ struct{} `type:"structure"`
// The error code for an individual record result. ErrorCodes can be either
// ProvisionedThroughputExceededException or InternalFailure.
ErrorCode *string `type:"string"`
// The error message for an individual record result. An ErrorCode value of
// ProvisionedThroughputExceededException has an error message that includes
// the account ID, stream name, and shard ID. An ErrorCode value of InternalFailure
// has the error message "Internal Service Failure".
ErrorMessage *string `type:"string"`
// The sequence number for an individual record result.
SequenceNumber *string `type:"string"`
// The shard ID for an individual record result.
ShardId *string `min:"1" type:"string"`
}
// String returns the string representation
func (s PutRecordsResultEntry) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s PutRecordsResultEntry) GoString() string {
return s.String()
}
// SetErrorCode sets the ErrorCode field's value.
func (s *PutRecordsResultEntry) SetErrorCode(v string) *PutRecordsResultEntry {
s.ErrorCode = &v
return s
}
// SetErrorMessage sets the ErrorMessage field's value.
func (s *PutRecordsResultEntry) SetErrorMessage(v string) *PutRecordsResultEntry {
s.ErrorMessage = &v
return s
}
// SetSequenceNumber sets the SequenceNumber field's value.
func (s *PutRecordsResultEntry) SetSequenceNumber(v string) *PutRecordsResultEntry {
s.SequenceNumber = &v
return s
}
// SetShardId sets the ShardId field's value.
func (s *PutRecordsResultEntry) SetShardId(v string) *PutRecordsResultEntry {
s.ShardId = &v
return s
}
// The unit of data of the Amazon Kinesis stream, which is composed of a sequence
// number, a partition key, and a data blob.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/Record
type Record struct {
_ struct{} `type:"structure"`
// The approximate time that the record was inserted into the stream.
ApproximateArrivalTimestamp *time.Time `type:"timestamp" timestampFormat:"unix"`
// The data blob. The data in the blob is both opaque and immutable to the Amazon
// Kinesis service, which does not inspect, interpret, or change the data in
// the blob in any way. When the data blob (the payload before base64-encoding)
// is added to the partition key size, the total size must not exceed the maximum
// record size (1 MB).
//
// Data is automatically base64 encoded/decoded by the SDK.
//
// Data is a required field
Data []byte `type:"blob" required:"true"`
// The encryption type used on the record. This parameter can be one of the
// following values:
//
// * NONE: Do not encrypt the records in the stream.
//
// * KMS: Use server-side encryption on the records in the stream using a
// customer-managed KMS key.
EncryptionType *string `type:"string" enum:"EncryptionType"`
// Identifies which shard in the stream the data record is assigned to.
//
// PartitionKey is a required field
PartitionKey *string `min:"1" type:"string" required:"true"`
// The unique identifier of the record within its shard.
//
// SequenceNumber is a required field
SequenceNumber *string `type:"string" required:"true"`
}
// String returns the string representation
func (s Record) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s Record) GoString() string {
return s.String()
}
// SetApproximateArrivalTimestamp sets the ApproximateArrivalTimestamp field's value.
func (s *Record) SetApproximateArrivalTimestamp(v time.Time) *Record {
s.ApproximateArrivalTimestamp = &v
return s
}
// SetData sets the Data field's value.
func (s *Record) SetData(v []byte) *Record {
s.Data = v
return s
}
// SetEncryptionType sets the EncryptionType field's value.
func (s *Record) SetEncryptionType(v string) *Record {
s.EncryptionType = &v
return s
}
// SetPartitionKey sets the PartitionKey field's value.
func (s *Record) SetPartitionKey(v string) *Record {
s.PartitionKey = &v
return s
}
// SetSequenceNumber sets the SequenceNumber field's value.
func (s *Record) SetSequenceNumber(v string) *Record {
s.SequenceNumber = &v
return s
}
// Represents the input for RemoveTagsFromStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/RemoveTagsFromStreamInput
type RemoveTagsFromStreamInput struct {
_ struct{} `type:"structure"`
// The name of the stream.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
// A list of tag keys. Each corresponding tag is removed from the stream.
//
// TagKeys is a required field
TagKeys []*string `min:"1" type:"list" required:"true"`
}
// String returns the string representation
func (s RemoveTagsFromStreamInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s RemoveTagsFromStreamInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *RemoveTagsFromStreamInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "RemoveTagsFromStreamInput"}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if s.TagKeys == nil {
invalidParams.Add(request.NewErrParamRequired("TagKeys"))
}
if s.TagKeys != nil && len(s.TagKeys) < 1 {
invalidParams.Add(request.NewErrParamMinLen("TagKeys", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetStreamName sets the StreamName field's value.
func (s *RemoveTagsFromStreamInput) SetStreamName(v string) *RemoveTagsFromStreamInput {
s.StreamName = &v
return s
}
// SetTagKeys sets the TagKeys field's value.
func (s *RemoveTagsFromStreamInput) SetTagKeys(v []*string) *RemoveTagsFromStreamInput {
s.TagKeys = v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/RemoveTagsFromStreamOutput
type RemoveTagsFromStreamOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s RemoveTagsFromStreamOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s RemoveTagsFromStreamOutput) GoString() string {
return s.String()
}
// The range of possible sequence numbers for the shard.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/SequenceNumberRange
type SequenceNumberRange struct {
_ struct{} `type:"structure"`
// The ending sequence number for the range. Shards that are in the OPEN state
// have an ending sequence number of null.
EndingSequenceNumber *string `type:"string"`
// The starting sequence number for the range.
//
// StartingSequenceNumber is a required field
StartingSequenceNumber *string `type:"string" required:"true"`
}
// String returns the string representation
func (s SequenceNumberRange) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s SequenceNumberRange) GoString() string {
return s.String()
}
// SetEndingSequenceNumber sets the EndingSequenceNumber field's value.
func (s *SequenceNumberRange) SetEndingSequenceNumber(v string) *SequenceNumberRange {
s.EndingSequenceNumber = &v
return s
}
// SetStartingSequenceNumber sets the StartingSequenceNumber field's value.
func (s *SequenceNumberRange) SetStartingSequenceNumber(v string) *SequenceNumberRange {
s.StartingSequenceNumber = &v
return s
}
// A uniquely identified group of data records in an Amazon Kinesis stream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/Shard
type Shard struct {
_ struct{} `type:"structure"`
// The shard ID of the shard adjacent to the shard's parent.
AdjacentParentShardId *string `min:"1" type:"string"`
// The range of possible hash key values for the shard, which is a set of ordered
// contiguous positive integers.
//
// HashKeyRange is a required field
HashKeyRange *HashKeyRange `type:"structure" required:"true"`
// The shard ID of the shard's parent.
ParentShardId *string `min:"1" type:"string"`
// The range of possible sequence numbers for the shard.
//
// SequenceNumberRange is a required field
SequenceNumberRange *SequenceNumberRange `type:"structure" required:"true"`
// The unique identifier of the shard within the stream.
//
// ShardId is a required field
ShardId *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s Shard) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s Shard) GoString() string {
return s.String()
}
// SetAdjacentParentShardId sets the AdjacentParentShardId field's value.
func (s *Shard) SetAdjacentParentShardId(v string) *Shard {
s.AdjacentParentShardId = &v
return s
}
// SetHashKeyRange sets the HashKeyRange field's value.
func (s *Shard) SetHashKeyRange(v *HashKeyRange) *Shard {
s.HashKeyRange = v
return s
}
// SetParentShardId sets the ParentShardId field's value.
func (s *Shard) SetParentShardId(v string) *Shard {
s.ParentShardId = &v
return s
}
// SetSequenceNumberRange sets the SequenceNumberRange field's value.
func (s *Shard) SetSequenceNumberRange(v *SequenceNumberRange) *Shard {
s.SequenceNumberRange = v
return s
}
// SetShardId sets the ShardId field's value.
func (s *Shard) SetShardId(v string) *Shard {
s.ShardId = &v
return s
}
// Represents the input for SplitShard.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/SplitShardInput
type SplitShardInput struct {
_ struct{} `type:"structure"`
// A hash key value for the starting hash key of one of the child shards created
// by the split. The hash key range for a given shard constitutes a set of ordered
// contiguous positive integers. The value for NewStartingHashKey must be in
// the range of hash keys being mapped into the shard. The NewStartingHashKey
// hash key value and all higher hash key values in hash key range are distributed
// to one of the child shards. All the lower hash key values in the range are
// distributed to the other child shard.
//
// NewStartingHashKey is a required field
NewStartingHashKey *string `type:"string" required:"true"`
// The shard ID of the shard to split.
//
// ShardToSplit is a required field
ShardToSplit *string `min:"1" type:"string" required:"true"`
// The name of the stream for the shard split.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s SplitShardInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s SplitShardInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *SplitShardInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "SplitShardInput"}
if s.NewStartingHashKey == nil {
invalidParams.Add(request.NewErrParamRequired("NewStartingHashKey"))
}
if s.ShardToSplit == nil {
invalidParams.Add(request.NewErrParamRequired("ShardToSplit"))
}
if s.ShardToSplit != nil && len(*s.ShardToSplit) < 1 {
invalidParams.Add(request.NewErrParamMinLen("ShardToSplit", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetNewStartingHashKey sets the NewStartingHashKey field's value.
func (s *SplitShardInput) SetNewStartingHashKey(v string) *SplitShardInput {
s.NewStartingHashKey = &v
return s
}
// SetShardToSplit sets the ShardToSplit field's value.
func (s *SplitShardInput) SetShardToSplit(v string) *SplitShardInput {
s.ShardToSplit = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *SplitShardInput) SetStreamName(v string) *SplitShardInput {
s.StreamName = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/SplitShardOutput
type SplitShardOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s SplitShardOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s SplitShardOutput) GoString() string {
return s.String()
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StartStreamEncryptionInput
type StartStreamEncryptionInput struct {
_ struct{} `type:"structure"`
// The encryption type to use. This parameter can be one of the following values:
//
// * NONE: Not valid for this operation. An InvalidOperationException will
// be thrown.
//
// * KMS: Use server-side encryption on the records in the stream using a
// customer-managed KMS key.
//
// EncryptionType is a required field
EncryptionType *string `type:"string" required:"true" enum:"EncryptionType"`
// The GUID for the customer-managed KMS key to use for encryption. You can
// also use a Kinesis-owned master key by specifying the alias aws/kinesis.
//
// KeyId is a required field
KeyId *string `min:"1" type:"string" required:"true"`
// The name of the stream for which to start encrypting records.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s StartStreamEncryptionInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s StartStreamEncryptionInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *StartStreamEncryptionInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "StartStreamEncryptionInput"}
if s.EncryptionType == nil {
invalidParams.Add(request.NewErrParamRequired("EncryptionType"))
}
if s.KeyId == nil {
invalidParams.Add(request.NewErrParamRequired("KeyId"))
}
if s.KeyId != nil && len(*s.KeyId) < 1 {
invalidParams.Add(request.NewErrParamMinLen("KeyId", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetEncryptionType sets the EncryptionType field's value.
func (s *StartStreamEncryptionInput) SetEncryptionType(v string) *StartStreamEncryptionInput {
s.EncryptionType = &v
return s
}
// SetKeyId sets the KeyId field's value.
func (s *StartStreamEncryptionInput) SetKeyId(v string) *StartStreamEncryptionInput {
s.KeyId = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *StartStreamEncryptionInput) SetStreamName(v string) *StartStreamEncryptionInput {
s.StreamName = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StartStreamEncryptionOutput
type StartStreamEncryptionOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s StartStreamEncryptionOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s StartStreamEncryptionOutput) GoString() string {
return s.String()
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StopStreamEncryptionInput
type StopStreamEncryptionInput struct {
_ struct{} `type:"structure"`
// The encryption type. This parameter can be one of the following values:
//
// * NONE: Not valid for this operation. An InvalidOperationException will
// be thrown.
//
// * KMS: Use server-side encryption on the records in the stream using a
// customer-managed KMS key.
//
// EncryptionType is a required field
EncryptionType *string `type:"string" required:"true" enum:"EncryptionType"`
// The GUID for the customer-managed key that was used for encryption.
//
// KeyId is a required field
KeyId *string `min:"1" type:"string" required:"true"`
// The name of the stream on which to stop encrypting records.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
}
// String returns the string representation
func (s StopStreamEncryptionInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s StopStreamEncryptionInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *StopStreamEncryptionInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "StopStreamEncryptionInput"}
if s.EncryptionType == nil {
invalidParams.Add(request.NewErrParamRequired("EncryptionType"))
}
if s.KeyId == nil {
invalidParams.Add(request.NewErrParamRequired("KeyId"))
}
if s.KeyId != nil && len(*s.KeyId) < 1 {
invalidParams.Add(request.NewErrParamMinLen("KeyId", 1))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetEncryptionType sets the EncryptionType field's value.
func (s *StopStreamEncryptionInput) SetEncryptionType(v string) *StopStreamEncryptionInput {
s.EncryptionType = &v
return s
}
// SetKeyId sets the KeyId field's value.
func (s *StopStreamEncryptionInput) SetKeyId(v string) *StopStreamEncryptionInput {
s.KeyId = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *StopStreamEncryptionInput) SetStreamName(v string) *StopStreamEncryptionInput {
s.StreamName = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StopStreamEncryptionOutput
type StopStreamEncryptionOutput struct {
_ struct{} `type:"structure"`
}
// String returns the string representation
func (s StopStreamEncryptionOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s StopStreamEncryptionOutput) GoString() string {
return s.String()
}
// Represents the output for DescribeStream.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/StreamDescription
type StreamDescription struct {
_ struct{} `type:"structure"`
// The server-side encryption type used on the stream. This parameter can be
// one of the following values:
//
// * NONE: Do not encrypt the records in the stream.
//
// * KMS: Use server-side encryption on the records in the stream using a
// customer-managed KMS key.
EncryptionType *string `type:"string" enum:"EncryptionType"`
// Represents the current enhanced monitoring settings of the stream.
//
// EnhancedMonitoring is a required field
EnhancedMonitoring []*EnhancedMetrics `type:"list" required:"true"`
// If set to true, more shards in the stream are available to describe.
//
// HasMoreShards is a required field
HasMoreShards *bool `type:"boolean" required:"true"`
// The GUID for the customer-managed KMS key used for encryption on the stream.
KeyId *string `min:"1" type:"string"`
// The current retention period, in hours.
//
// RetentionPeriodHours is a required field
RetentionPeriodHours *int64 `min:"1" type:"integer" required:"true"`
// The shards that comprise the stream.
//
// Shards is a required field
Shards []*Shard `type:"list" required:"true"`
// The Amazon Resource Name (ARN) for the stream being described.
//
// StreamARN is a required field
StreamARN *string `type:"string" required:"true"`
// The approximate time that the stream was created.
//
// StreamCreationTimestamp is a required field
StreamCreationTimestamp *time.Time `type:"timestamp" timestampFormat:"unix" required:"true"`
// The name of the stream being described.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
// The current status of the stream being described. The stream status is one
// of the following states:
//
// * CREATING - The stream is being created. Amazon Kinesis immediately returns
// and sets StreamStatus to CREATING.
//
// * DELETING - The stream is being deleted. The specified stream is in the
// DELETING state until Amazon Kinesis completes the deletion.
//
// * ACTIVE - The stream exists and is ready for read and write operations
// or deletion. You should perform read and write operations only on an ACTIVE
// stream.
//
// * UPDATING - Shards in the stream are being merged or split. Read and
// write operations continue to work while the stream is in the UPDATING
// state.
//
// StreamStatus is a required field
StreamStatus *string `type:"string" required:"true" enum:"StreamStatus"`
}
// String returns the string representation
func (s StreamDescription) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s StreamDescription) GoString() string {
return s.String()
}
// SetEncryptionType sets the EncryptionType field's value.
func (s *StreamDescription) SetEncryptionType(v string) *StreamDescription {
s.EncryptionType = &v
return s
}
// SetEnhancedMonitoring sets the EnhancedMonitoring field's value.
func (s *StreamDescription) SetEnhancedMonitoring(v []*EnhancedMetrics) *StreamDescription {
s.EnhancedMonitoring = v
return s
}
// SetHasMoreShards sets the HasMoreShards field's value.
func (s *StreamDescription) SetHasMoreShards(v bool) *StreamDescription {
s.HasMoreShards = &v
return s
}
// SetKeyId sets the KeyId field's value.
func (s *StreamDescription) SetKeyId(v string) *StreamDescription {
s.KeyId = &v
return s
}
// SetRetentionPeriodHours sets the RetentionPeriodHours field's value.
func (s *StreamDescription) SetRetentionPeriodHours(v int64) *StreamDescription {
s.RetentionPeriodHours = &v
return s
}
// SetShards sets the Shards field's value.
func (s *StreamDescription) SetShards(v []*Shard) *StreamDescription {
s.Shards = v
return s
}
// SetStreamARN sets the StreamARN field's value.
func (s *StreamDescription) SetStreamARN(v string) *StreamDescription {
s.StreamARN = &v
return s
}
// SetStreamCreationTimestamp sets the StreamCreationTimestamp field's value.
func (s *StreamDescription) SetStreamCreationTimestamp(v time.Time) *StreamDescription {
s.StreamCreationTimestamp = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *StreamDescription) SetStreamName(v string) *StreamDescription {
s.StreamName = &v
return s
}
// SetStreamStatus sets the StreamStatus field's value.
func (s *StreamDescription) SetStreamStatus(v string) *StreamDescription {
s.StreamStatus = &v
return s
}
// Metadata assigned to the stream, consisting of a key-value pair.
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/Tag
type Tag struct {
_ struct{} `type:"structure"`
// A unique identifier for the tag. Maximum length: 128 characters. Valid characters:
// Unicode letters, digits, white space, _ . / = + - % @
//
// Key is a required field
Key *string `min:"1" type:"string" required:"true"`
// An optional string, typically used to describe or define the tag. Maximum
// length: 256 characters. Valid characters: Unicode letters, digits, white
// space, _ . / = + - % @
Value *string `type:"string"`
}
// String returns the string representation
func (s Tag) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s Tag) GoString() string {
return s.String()
}
// SetKey sets the Key field's value.
func (s *Tag) SetKey(v string) *Tag {
s.Key = &v
return s
}
// SetValue sets the Value field's value.
func (s *Tag) SetValue(v string) *Tag {
s.Value = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/UpdateShardCountInput
type UpdateShardCountInput struct {
_ struct{} `type:"structure"`
// The scaling type. Uniform scaling creates shards of equal size.
//
// ScalingType is a required field
ScalingType *string `type:"string" required:"true" enum:"ScalingType"`
// The name of the stream.
//
// StreamName is a required field
StreamName *string `min:"1" type:"string" required:"true"`
// The new number of shards.
//
// TargetShardCount is a required field
TargetShardCount *int64 `min:"1" type:"integer" required:"true"`
}
// String returns the string representation
func (s UpdateShardCountInput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s UpdateShardCountInput) GoString() string {
return s.String()
}
// Validate inspects the fields of the type to determine if they are valid.
func (s *UpdateShardCountInput) Validate() error {
invalidParams := request.ErrInvalidParams{Context: "UpdateShardCountInput"}
if s.ScalingType == nil {
invalidParams.Add(request.NewErrParamRequired("ScalingType"))
}
if s.StreamName == nil {
invalidParams.Add(request.NewErrParamRequired("StreamName"))
}
if s.StreamName != nil && len(*s.StreamName) < 1 {
invalidParams.Add(request.NewErrParamMinLen("StreamName", 1))
}
if s.TargetShardCount == nil {
invalidParams.Add(request.NewErrParamRequired("TargetShardCount"))
}
if s.TargetShardCount != nil && *s.TargetShardCount < 1 {
invalidParams.Add(request.NewErrParamMinValue("TargetShardCount", 1))
}
if invalidParams.Len() > 0 {
return invalidParams
}
return nil
}
// SetScalingType sets the ScalingType field's value.
func (s *UpdateShardCountInput) SetScalingType(v string) *UpdateShardCountInput {
s.ScalingType = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *UpdateShardCountInput) SetStreamName(v string) *UpdateShardCountInput {
s.StreamName = &v
return s
}
// SetTargetShardCount sets the TargetShardCount field's value.
func (s *UpdateShardCountInput) SetTargetShardCount(v int64) *UpdateShardCountInput {
s.TargetShardCount = &v
return s
}
// Please also see https://docs.aws.amazon.com/goto/WebAPI/kinesis-2013-12-02/UpdateShardCountOutput
type UpdateShardCountOutput struct {
_ struct{} `type:"structure"`
// The current number of shards.
CurrentShardCount *int64 `min:"1" type:"integer"`
// The name of the stream.
StreamName *string `min:"1" type:"string"`
// The updated number of shards.
TargetShardCount *int64 `min:"1" type:"integer"`
}
// String returns the string representation
func (s UpdateShardCountOutput) String() string {
return awsutil.Prettify(s)
}
// GoString returns the string representation
func (s UpdateShardCountOutput) GoString() string {
return s.String()
}
// SetCurrentShardCount sets the CurrentShardCount field's value.
func (s *UpdateShardCountOutput) SetCurrentShardCount(v int64) *UpdateShardCountOutput {
s.CurrentShardCount = &v
return s
}
// SetStreamName sets the StreamName field's value.
func (s *UpdateShardCountOutput) SetStreamName(v string) *UpdateShardCountOutput {
s.StreamName = &v
return s
}
// SetTargetShardCount sets the TargetShardCount field's value.
func (s *UpdateShardCountOutput) SetTargetShardCount(v int64) *UpdateShardCountOutput {
s.TargetShardCount = &v
return s
}
const (
// EncryptionTypeNone is a EncryptionType enum value
EncryptionTypeNone = "NONE"
// EncryptionTypeKms is a EncryptionType enum value
EncryptionTypeKms = "KMS"
)
const (
// MetricsNameIncomingBytes is a MetricsName enum value
MetricsNameIncomingBytes = "IncomingBytes"
// MetricsNameIncomingRecords is a MetricsName enum value
MetricsNameIncomingRecords = "IncomingRecords"
// MetricsNameOutgoingBytes is a MetricsName enum value
MetricsNameOutgoingBytes = "OutgoingBytes"
// MetricsNameOutgoingRecords is a MetricsName enum value
MetricsNameOutgoingRecords = "OutgoingRecords"
// MetricsNameWriteProvisionedThroughputExceeded is a MetricsName enum value
MetricsNameWriteProvisionedThroughputExceeded = "WriteProvisionedThroughputExceeded"
// MetricsNameReadProvisionedThroughputExceeded is a MetricsName enum value
MetricsNameReadProvisionedThroughputExceeded = "ReadProvisionedThroughputExceeded"
// MetricsNameIteratorAgeMilliseconds is a MetricsName enum value
MetricsNameIteratorAgeMilliseconds = "IteratorAgeMilliseconds"
// MetricsNameAll is a MetricsName enum value
MetricsNameAll = "ALL"
)
const (
// ScalingTypeUniformScaling is a ScalingType enum value
ScalingTypeUniformScaling = "UNIFORM_SCALING"
)
const (
// ShardIteratorTypeAtSequenceNumber is a ShardIteratorType enum value
ShardIteratorTypeAtSequenceNumber = "AT_SEQUENCE_NUMBER"
// ShardIteratorTypeAfterSequenceNumber is a ShardIteratorType enum value
ShardIteratorTypeAfterSequenceNumber = "AFTER_SEQUENCE_NUMBER"
// ShardIteratorTypeTrimHorizon is a ShardIteratorType enum value
ShardIteratorTypeTrimHorizon = "TRIM_HORIZON"
// ShardIteratorTypeLatest is a ShardIteratorType enum value
ShardIteratorTypeLatest = "LATEST"
// ShardIteratorTypeAtTimestamp is a ShardIteratorType enum value
ShardIteratorTypeAtTimestamp = "AT_TIMESTAMP"
)
const (
// StreamStatusCreating is a StreamStatus enum value
StreamStatusCreating = "CREATING"
// StreamStatusDeleting is a StreamStatus enum value
StreamStatusDeleting = "DELETING"
// StreamStatusActive is a StreamStatus enum value
StreamStatusActive = "ACTIVE"
// StreamStatusUpdating is a StreamStatus enum value
StreamStatusUpdating = "UPDATING"
)