Commit Graph

150 Commits

Author SHA1 Message Date
Wade Simmons 1ea8847085
linux: set advmss correctly when route MTU is used (#245)
If different mtus are specified for different routes, we should set
advmss on each route because Linux does a poor job of selecting the
default (from ip-route(8)):

    advmss NUMBER (Linux 2.3.15+ only)
           the MSS ('Maximal Segment Size') to advertise to these destinations when estab‐
           lishing TCP connections. If it is not given, Linux uses a default value calcu‐
           lated from the first hop device MTU.  (If the path to these destination is asym‐
           metric, this guess may be wrong.)

Note that the default value is calculated from the first hop *device
MTU*, not the *route MTU*. In practice this is usually ok as long as the
other side of the tunnel has the mtu configured exactly the same, but we
should probably just set advmss correctly on these routes.
2020-06-26 13:47:21 -04:00
Wade Simmons 55858c64cc
smoke test: test firewall inbound / outbound (#240)
Test that basic inbound / outbound firewall rules work during the smoke
test. This change sets an inbound firewall rule on host3, and a new
host4 with outbound firewall rules. It also tests that conntrack allows
packets once the connection has been established.
2020-06-26 13:46:51 -04:00
Wade Simmons e94c6b0125
mips-softfloat (#231)
This makes GOARM more generic and does GOMIPS in a similar way to
support mips-softfloat. We also set `-ldflags "-s -w"` for
mips-softfloat to give the best chance of the binary working on these
small devices.
2020-06-26 13:46:23 -04:00
Wade Simmons b37a91cfbc
add meta packet statistics (#230)
This change add more metrics around "meta" (non "message" type packets).
For lighthouse packets, we also record statistics around the specific
lighthouse meta type.

We don't keep statistics for the "message" type so that we don't slow
down the fast path (and you can just look at metrics on the tun
interface to find that information).
2020-06-26 13:45:48 -04:00
David Sonder 3212b769d4
fix typo in conntrack section in examples/config.yml (#236)
the rest of the conntrack values match the default
2020-06-26 11:08:22 -05:00
Patrick Bogen ecf0e5a9f6
drop packets even if we aren't going to emit Debug logs about it (#239)
* drop packets even if we aren't going to emit Debug logs about it

* smallify change
2020-06-10 16:55:49 -05:00
Wade Simmons ff13aba8fc
allow `go test -bench=.` to run (#234)
This benchmark had an Errorf at the end, lets remove it so the
benchmarks all run.
2020-05-27 16:52:34 -04:00
Mateusz Kwiatkowski cc03ff9e9a
Unbreak building for FreeBSD (#103)
Add support for freebsd. You have to set `tun.dev` in your config. The second pass of this would be to remove the exec calls and use ioctl(2) and route(4) instead, but we can do that in a second PR.

Co-authored-by: Wade Simmons <wade@wades.im>
2020-05-26 22:23:23 -04:00
Patrick Bogen 363c836422
log the reason for fw drops (#220)
* log the reason for fw drops

* only prepare log if we will end up sending it
2020-04-10 10:57:21 -07:00
Wade Simmons fb252db4a1
v1.2.0 (#215)
Add descriptions for all commits since v1.1.0
2020-04-08 19:52:24 -04:00
Wade Simmons 4f6313ebd3
fix config name for {remote,local}_allow_list (#219)
This config option should be snake_case, not camelCase.
2020-04-08 16:20:12 -04:00
Wade Simmons 0a474e757b
Add lighthouse.{remoteAllowList,localAllowList} (#217)
These settings make it possible to blacklist / whitelist IP addresses
that are used for remote connections.

`lighthouse.remoteAllowList` filters which remote IPs are allow when
fetching from the lighthouse (or, if you are the lighthouse, which IPs
you store and forward to querying hosts). By default, any remote IPs are
allowed. You can provide CIDRs here with `true` to allow and `false` to
deny. The most specific CIDR rule applies to each remote.  If all rules
are "allow", the default will be "deny", and vice-versa. If both "allow"
and "deny" rules are present, then you MUST set a rule for "0.0.0.0/0"
as the default.

    lighthouse:
      remoteAllowList:
        # Example to block IPs from this subnet from being used for remote IPs.
        "172.16.0.0/12": false

        # A more complicated example, allow public IPs but only private IPs from a specific subnet
        "0.0.0.0/0": true
        "10.0.0.0/8": false
        "10.42.42.0/24": true

`lighthouse.localAllowList` has the same logic as above, but it applies
to the local addresses we advertise to the lighthouse. Additionally, you
can specify an `interfaces` map of regular expressions to match against
interface names. The regexp must match the entire name. All interface
rules must be either true or false (and the default rule will be the
inverse). CIDR rules are matched after interface name rules.

Default is all local IP addresses.

    lighthouse:
      localAllowList:
        # Example to blacklist docker interfaces.
        interfaces:
          'docker.*': false

        # Example to only advertise IPs in this subnet to the lighthouse.
        "10.0.0.0/8": true
2020-04-08 15:36:43 -04:00
Nathan Brown 7cd342c7ab
Add a systemd unit for arch and a wireshark dissector (#216) 2020-04-06 18:47:32 -07:00
Wade Simmons 7cdbb14a18
Better config test (#177)
* Better config test

Previously, when using the config test option `-test`, we quit fairly
earlier in the process and would not catch a variety of additional
parsing errors (such as lighthouse IP addresses, local_range, the new
check to make sure static hosts are in the certificate's subnet, etc).

* run config test as part of smoke test

* don't need privileges for configtest

Co-authored-by: Nathan Brown <nate@slack-corp.com>
2020-04-06 11:35:32 -07:00
Wade Simmons b4f2f7ce4e
log `certName` alongside `vpnIp` (#200)
This change adds a new helper, `(*HostInfo).logger()`, that starts a new
logrus.Entry with `vpnIp` and `certName`. We don't use the helper inside
of handshake_ix though since the certificate has not been attached to
the HostInfo yet.

Fixes: #84
2020-04-06 11:34:00 -07:00
Alex ff64d1f952
unsafe_routes mtu (#209) 2020-04-06 11:33:30 -07:00
Felix Yan 9e2ff7df57
Correct typos in noise.go (#205) 2020-03-30 11:23:55 -07:00
Ryan Huber 1297090af3
add configurable punching delay because of race-condition-y conntracks (#210)
* add configurable punching delay because of race-condition-y conntracks

* add changelog

* fix tests

* only do one punch per query

* Coalesce punchy config

* It is not is not set

* Add tests

Co-authored-by: Nate Brown <nbrown.us@gmail.com>
2020-03-27 11:26:39 -07:00
Wade Simmons add1b21777
only create a CIDRTree for each host if necessary (#198)
A CIDRTree can be expensive to create, so only do it if we need
it. If the remote host only has one IP address and no subnets, just do
an exact IP match instead.

Fixes: #171
2020-03-02 16:21:33 -05:00
Wade Simmons 1cb3201b5e
Github Actions: cache modules and only run when necessary (#197)
This PR does two things:

- Only run the tests when relevant files change.
- Cache the Go Modules directory between runs, so they don't have to redownload everything everytime (go.sum is the cache key). Pretty much straight from the examples: https://github.com/actions/cache/blob/master/examples.md#go---modules
2020-03-02 16:21:19 -05:00
Ryan Huber 41968551f9
clarify that lighthouse IP should be nebula range (#196) 2020-02-28 11:35:55 -08:00
Wade Simmons 8548ac3c31
build and test with go1.14 (#195)
- https://golang.org/doc/go1.14

I did a performance sanity check in Docker, and performance seems about
the same (perhaps slightly higher).
2020-02-27 15:48:39 -05:00
Wade Simmons fb9b36f677
allow any config file name if specified directly (#189)
Currently, we require that config file names end with `.yml` or `.yaml`.
This is because if the user points `-config` at a directory of files, we
only want to use the YAML files in that directory.

But this makes it more difficult to use the `-test -config` option
because config management tools might not have an extension on the file
when preparing a new config file. This change makes it so that if you
point `-config file` directly at a file, it uses it no matter what the
extension is.
2020-02-26 15:38:56 -05:00
Sebastien Bariteau 4d1928f1e3
Support unsafe_routes on Windows (#184)
* Support unsafe_routes on Windows

* Full path to route executable

* Escape string properly
2020-02-26 15:23:16 -05:00
Ryan Huber a91a40212d
check that packet isn't bound for my vpn ip (#192) 2020-02-21 16:49:54 -08:00
Wade Simmons 179a369130
add configuration options for HandshakeManager (#179)
This change exposes the current constants we have defined for the handshake
manager as configuration options. This will allow us to test and tweak
with different intervals and wait rotations.

    # Handshake Manger Settings
    handshakes:
      # Total time to try a handshake = sequence of `try_interval * retries`
      # With 100ms interval and 20 retries it is 23.5 seconds
      try_interval: 100ms
      retries: 20

      # wait_rotation is the number of handshake attempts to do before starting to try non-local IP addresses
      wait_rotation: 5
2020-02-21 16:25:11 -05:00
Wade Simmons df69371620
use absolute paths on darwin and windows (#191)
We want to make sure to use the system binaries, and not whatever is in
the PATH.
2020-02-21 15:25:33 -05:00
Wade Simmons eda344d88f
add logging.timestamp_format config option (#187)
This change introduces logging.timestamp_format, which allows
configuration of the Logrus TimestampFormat setting. The primary purpose
of this change was to allow logging with millisecond precision. The
default for `text` and `json` formats remains the same for backwards
compatibility.

timestamp format is specified in Go time format, see:

 - https://golang.org/pkg/time/#pkg-constants

Default when `format: json`: "2006-01-02T15:04:05Z07:00" (RFC3339)
Default when `format: text`:
  when TTY attached: seconds since beginning of execution
  otherwise: "2006-01-02T15:04:05Z07:00" (RFC3339)

As an example, to log as RFC3339 with millisecond precision, set to:

    logging:
        timestamp_format: "2006-01-02T15:04:05.000Z07:00"
2020-02-21 15:25:00 -05:00
Wade Simmons 065e2ff88a
update golang.org/x/crypto (#188)
This version contains a fix for CVE-2020-9283, a remote crash bug:

- https://groups.google.com/forum/#!msg/golang-announce/3L45YRc91SY/ywEPcKLnGQAJ
2020-02-20 14:49:55 -05:00
Nathan Brown 45a5de2719
Print the udp listen address on startup (#181) 2020-02-06 21:17:43 -08:00
Wade Simmons 2d24ef7166
validate lighthouses and static hosts are in our subnet (#170)
Validate all lighthouse.hosts and static_host_map VPN IPs are in the
subnet defined in our cert. Exit with a fatal error if they are not in
our subnet, as this is an invalid configuration (we will not have the
proper routes set up to communicate with these hosts).

This error case could occur for the following invalid example:

    nebula-cert sign -name "lighthouse" -ip "10.0.1.1/24"
    nebula-cert sign -name "host" -ip "10.0.2.1/24"

    config.yaml:

        static_host_map:
            "10.0.1.1": ["lighthouse.local:4242"]
        lighthouse:
          hosts:
            - "10.0.1.1"

We will now return a fatal error for this config, since `10.0.1.1` is
not in the host cert's subnet of `10.0.2.1/24`
2020-01-20 15:52:55 -05:00
Wade Simmons 13941aa723
Prepare for 1.1.0 release. (#167)
Update the changelog to mark today as the release day for 1.1.0.
2020-01-17 12:29:42 -05:00
Wade Simmons 672edcaf73
add CHANGELOG.md (#166)
This is the initial creation of a CHANGELOG. When we are ready to cut
a release we can change the version at the top and update the links at
the bottom.
2020-01-17 09:23:54 -05:00
Ryan Huber 25bf80d8d3
add new invite link without expiration date (#165)
merging because link doesn't work rn and this is not a code change.
2020-01-16 10:09:45 -06:00
Alan Lam 5c126cd42b
conform to new build format for vagrant (#153)
* conform to new build format for vagrant
2020-01-08 11:32:28 -08:00
Ryan Huber 91f7b9c049
Update README.md
fix readme
2020-01-07 12:40:25 -06:00
Stephan 1592da921d fix(nebula-cert): flag duration is optional, so reflect this is the cli help (#117)
* fix: nebula-cert duration is optional, so reflect this is the cli help

nebula-cert sign defaults the duration flag to 1 second before the CA expires, so it is not required to be provided.

* tests: Fix test for duration flag help message

* nebula-cert: add duration default value hint
2020-01-06 10:51:29 -08:00
Chad Harp 4e0da13180 Support unsafe_routes on Darwin (#139)
* Support unsafe_routes on darwin

* fix formatting in tun_darwin.go (spaces to tabs)
2020-01-06 10:09:56 -08:00
Gábor Lipták e9b0498b21 Correct typo (#150) 2020-01-06 09:14:11 -08:00
Chad Harp efe741ad66 Allow ValidateLHStaticEntries to check all static host map entries (#141)
* Allow ValidateLHStaticEntries to check all static host map entries

* Cleaner fix for ValidateLHStaticEntries
2020-01-02 21:04:18 -05:00
Ryan Huber fd8ad5d0d7
Merge pull request #133 from slackhq/interval_zero_check
if interval is 0 don't even update lh (mobile use case)
2019-12-26 15:57:01 -06:00
Ryan Huber df8e45c13b if interval is 0 don't even update lh (mobile use case) 2019-12-26 21:12:31 +00:00
Wade Simmons 0eb5ce6b41
better windows targets in Makefile (#125)
This restores `make bin-windows` and also adds `make
build/nebula-windows-amd64.zip` to build the zip file.

Co-authored-by: Ryan Huber <rhuber@gmail.com>
2019-12-21 09:31:48 -05:00
Wade Simmons 8ed8419584
GitHub Action: add release script (#124)
This script will be triggered by any tag starting with `v[0-9]+.[0-9]+.[0-9]+` (i.e.
v1.1.0). It will create all of the .tar.gz files (or .zip for windows). The amd64 binaries will be
compiled on their target systems, the rest of the Linux architecures
will be cross compiled from the Linux amd64 host.

A SHASUM256.txt will also be generated and attached to the release.
2019-12-21 01:15:41 -05:00
Wade Simmons e728b81573
Merge pull request #122 from slackhq/better-makefile
Makefile improvements
2019-12-20 14:15:58 -05:00
Wade Simmons 4c1725772b make arm builds specific 2019-12-20 14:08:18 -05:00
Wade Simmons f6aabf14a6 fix whitespace 2019-12-20 13:55:15 -05:00
Wade Simmons bc7b3895f9 Makefile improvements
Simplify the makefile by using implicit rules. The new structure for the
build directory when using `make all` or `make release` is:

    build/$GOOS-$GOARCH-$GOARM/nebula

(The GOARM part is optional, and only used for linux-arm-6)

So, releases end up like `nebula-linux-amd64.tar.gz` or
`nebula-linux-arm-6.tar.gz`

This change also adds `-trimpath` to the build, to make the pathnames
more generic in our releases.
2019-12-20 13:48:41 -05:00
Nathan Brown fe8a71ed59
Merge pull request #121 from slackhq/txq-err
Make linux tx queue length an error log instead of a fatal on error
2019-12-20 09:21:46 -08:00
Nate Brown 9db16d226c Make linux tx queue length an error log instead of a fatal on error 2019-12-20 09:10:26 -08:00