Commit Graph

131 Commits

Author SHA1 Message Date
Alisdair McDiarmid ca40107066 command/init: Better diagnostics for provider 404s
Fetching a default namespace provider from the public registry can
result in 404 Not Found error. This might be caused by a previously-
default provider moving to a new namespace, which means that the
configuration needs to be upgraded to use an explicit provider source.

This commit adds a more detailed diagnostic for this situation,
suggesting that the intended provider might be in a new namespace. The
recommended course of action is to run the 0.13upgrade command to
generate the correct required_providers configuration.
2020-05-28 09:24:32 -04:00
Alisdair McDiarmid ef28671b34
Merge pull request #24932 from hashicorp/signing-language
Modify language for reporting signing state
2020-05-28 09:09:34 -04:00
Paul Tyng 22ef5cc99c Modify language for reporting signing state
Be more explicit about the signing status of fetched plugins and provide documentation about the different signing options.
2020-05-26 13:14:05 -04:00
Alisdair McDiarmid 62d826e066 command/init: Use full config for provider reqs
Relying on the early config for provider requirements was necessary in
Terraform 0.12, to allow the 0.12upgrade command to run after init
installs providers.

However in 0.13, the same restrictions do not apply, and the detection
of provider requirements has changed. As a result, the early config
loader gives incorrect provider requirements in some circumstances,
such as those in the new test in this commit.

Therefore we are changing the init command to use the requirements found
by the full configuration loader. This also means that we can remove the
internal initwd CheckCoreVersionRequirements function.
2020-05-25 16:50:12 -04:00
Kristin Laemmert eead4c49fe command/init: add e2e tests for provider not found messages 2020-05-20 11:04:11 -04:00
Kristin Laemmert 8d28d73de3 getproviders: add a registry-specific error and modify output when a
provider is not found.

Previously a user would see the following error even if terraform was
only searching the local filesystem:

"provider registry registry.terraform.io does not have a provider named
...."

This PR adds a registry-specific error type and modifies the MultiSource
installer to check for registry errors. It will return the
registry-specific error message if there is one, but if not the error
message will list all locations searched.
2020-05-20 11:04:11 -04:00
Kristin Laemmert a33a613703 command/init: add debug messages when -plugin-dir is set 2020-05-20 11:04:11 -04:00
Kristin Laemmert 862dc36884
command/init: include config loader diagnostics in output (#24921)
Previously the diagnostics from the config loaders (earlyconfig and
regular) were only appended to the overall diags if an error was found.
This adds all diagnostics from the regular config loader so that any
generated warnings will be displayed, even if there are no errors.

I did not add the `earlyconfig` warnings since they will be displayed if
there is an error and are likely to be duplicated by the config loader.
2020-05-12 08:39:12 -04:00
Kristin Laemmert 60321b41e8
getproviders: move protocol compatibility functions into registry client (#24846)
* internal/registry source: return error if requested provider version protocols are not supported

* getproviders: move responsibility for protocol compatibility checks into the registry client

The original implementation had the providercache checking the provider
metadata for protocol compatibility, but this is only relevant for the
registry source so it made more sense to move the logic into
getproviders.

This also addresses an issue where we were pulling the metadata for
every provider version until we found one that was supported. I've
extended the registry client to unmarshal the protocols in
`ProviderVersions` so we can filter through that list, instead of
pulling each version's metadata.
2020-05-11 13:49:12 -04:00
Kristin Laemmert 0b76100da0
init: return proper config errors (#24865)
Fixed a bug where we were returning earlyConfDiags instead of confDiags.
2020-05-05 10:08:05 -04:00
Kristin Laemmert ce03f1255f
internal/providercache: fix error message for protocol mismatch (#24818)
There was a bug in the installer trying to pass a nil error.
2020-04-30 11:12:04 -04:00
Alisdair McDiarmid a5b3d497cc internal: Verify provider signatures on install
Providers installed from the registry are accompanied by a list of
checksums (the "SHA256SUMS" file), which is cryptographically signed to
allow package authentication. The process of verifying this has multiple
steps:

- First we must verify that the SHA256 hash of the package archive
  matches the expected hash. This could be done for local installations
  too, in the future.
- Next we ensure that the expected hash returned as part of the registry
  API response matches an entry in the checksum list.
- Finally we verify the cryptographic signature of the checksum list,
  using the public keys provided by the registry.

Each of these steps is implemented as a separate PackageAuthentication
type. The local archive installation mechanism uses only the archive
checksum authenticator, and the HTTP installation uses all three in the
order given.

The package authentication system now also returns a result value, which
is used by command/init to display the result of the authentication
process.

There are three tiers of signature, each of which is presented
differently to the user:

- Signatures from the embedded HashiCorp public key indicate that the
  provider is officially supported by HashiCorp;
- If the signing key is not from HashiCorp, it may have an associated
  trust signature, which indicates that the provider is from one of
  HashiCorp's trusted partners;
- Otherwise, if the signature is valid, this is a community provider.
2020-04-17 13:57:19 -04:00
Martin Atkins 297a3a5db9 command/init: Restore the unconstrained provider warnings
When a provider dependency is implicit rather than explicit, or otherwise
when version constraints are lacking, we produce a warning recommending
the addition of explicit version constraints in the configuration.

This restores the warning functionality from previous Terraform versions,
adapting it slightly to account for the new provider FQN syntax and to
recommend using a required_providers block rather than version constraints
in "provider" blocks, because the latter is no longer recommended in the
documentation.
2020-04-06 09:24:23 -07:00
Alisdair McDiarmid b233aa39e9 addrs: Simplify presentation of provider FQNs
The provider fully-qualified name string used in configuration is very
long, and since most providers are hosted in the public registry, most
of that length is redundant. This commit adds and uses a `ForDisplay`
method, which simplifies the presentation of provider FQNs.

If the hostname is the default hostname, we now display only the
namespace and type. This is only used in UI, but should still be
unambiguous, as it matches the FQN string parsing behaviour.
2020-04-06 09:24:23 -07:00
Martin Atkins 958ea4f7d1 internal/providercache: Handle built-in providers
Built-in providers are special providers that are distributed as part of
Terraform CLI itself, rather than being installed separately. They always
live in the terraform.io/builtin/... namespace so it's easier to see that
they are special, and currently there is only one built-in provider named
"terraform".

Previous commits established the addressing scheme for built-in providers.
This commit makes the installer aware of them to the extent that it knows
not to try to install them the usual way and it's able to report an error
if the user requests a built-in provider that doesn't exist or tries to
impose a particular version constraint for a built-in provider.

For the moment the tests for this are the ones in the "command" package
because that's where the existing testing infrastructure for this
functionality lives. A later commit should add some more focused unit
tests here in the internal/providercache package, too.
2020-04-06 09:24:23 -07:00
Martin Atkins c4fb22863c command/init: Support -plugin-dir again
This is a slightly different approach than we used to take for this
option: rather than disabling the installer and causing all future
commands to look elsewhere for plugins, we'll now leave the installer
enabled by constrain it to only look at the given directories.

This is overall simpler because it doesn't require any special tracking
of the plugin directories for subsequent commands. Instead, the selections
file generated by the installer will record the versions it selected from
the specified directories, and we'll link them in to the local cache just
as we would normally so that other commands don't need to do anything
special to select the right plugins in either case.
2020-04-06 09:24:23 -07:00
Martin Atkins 549aede792 Remove terraform.ResourceProvider, use providercache.Installer instead
Back when we first introduced provider versioning in Terraform 0.10, we
did the provider version resolution in terraform.NewContext because we
weren't sure yet how exactly our versioning model was going to play out
(whether different versions could be selected per provider configuration,
for example) and because we were building around the limitations of our
existing filesystem-based plugin discovery model.

However, the new installer codepath is new able to do all of the
selections up front during installation, so we don't need such a heavy
inversion of control abstraction to get this done: the command package can
select the exact provider versions and pass their factories directly
to terraform.NewContext as a simple static map.

The result of this commit is that CLI commands other than "init" are now
able to consume the local cache directory and selections produced by the
installation process in "terraform init", passing all of the selected
providers down to the terraform.NewContext function for use in
implementing the main operations.

This commit is just enough to get the providers passing into the
terraform.Context. There's still plenty more to do here, including to
repair all of the tests this change has additionally broken.
2020-04-06 09:24:23 -07:00
Martin Atkins f113a7c22d command/init: Collect provider dependencies using our new helpers
This produces a value shaped the way the provider installer expects
without the need for further flattening and preprocessing.
2020-04-06 09:24:23 -07:00
Martin Atkins e6df3905c9 command/init: Generate progress output during provider installation
This restores some sequential event log output similar to what we had in
the previous implementation of plugin installation.
2020-04-06 09:24:23 -07:00
Martin Atkins 94e1ac2d07 command: Minimal integration of new provider installer in "init"
There's still a lot of work to do here around both the UX and the
follow-up steps that need to happen after installation completes, but this
is enough to faciliate some initial end-to-end testing of the new-style
install process.
2020-04-06 09:24:23 -07:00
Alisdair McDiarmid 67203dade8 command: Simplify Meta.process helper method
After some refactoring, this helper method had an unused argument (vars)
and an always-nil error return value. This commit cleans this up.
2020-04-01 15:01:08 -04:00
Kristin Laemmert 4f141ae365
rename provider-specific functions (#24417)
missingPlugins was hard-coded to work only with provider plugins, so I
renamed it to clarify the usage.

Also renamed a test provider from greater_than to greater-than as the
underscore is an invalid provider name character and this will become a
hard error in the near future.
2020-03-20 13:59:59 -04:00
Kristin Laemmert 5f313a65ad
command: remove 0.12upgrade (#24403)
* command: remove 0.12upgrade and related `configupgrade` library
* leave deprecation warning for 0.12upgrade to point users to v0.12
2020-03-19 08:01:16 -04:00
Martin Atkins f899f5aa42 command/init: new error message for signature verification failure
Our initial Terraform 0.13.0 release will continue to support only the
hard-coded official HashiCorp signing key, with support for other keys to
follow in a later release once the trust infrastructure is in place to
support that.

This change is intended to (marginally) improve the UX for a possible
future situation where a HashiCorp-distributed provider makes a released
signed with a new key and a prior version of Terraform ends up trying to
install it due to incorrect version constraints. With this new text we
hope to give the user a better prompt for onward troubleshooting, but
in a sort of hedging way because we have not yet finalized the details of
how new keys might roll out in practice.

Hopefully a user seeing this message would consult the release notes for
Terraform itself and for the provider in question and find some
as-yet-undetermined information about how to proceed.

If the decentralized trust model design comes together before the v0.13.0
release then we may make further amendments here to prepare for that, but
that work should not block the v0.13.0 release if other work concludes
first.
2020-02-25 10:31:54 -05:00
Kristin Laemmert 4d8fde3d6f
command: use backend config from state when backend=false is used. (#23802)
* command: use backend config from state when backend=false is used.

When a user runs `terraform init --backend=false`, terraform should
inspect the state for a previously-configured backend, and use that
backend, ignoring any backend config in the current configuration. If no
backend is configured or there is no state, return a local backend.

Fixes #16593
2020-01-07 15:07:06 -05:00
Kristin Laemmert f8a23da480 explicitly create legacy-style provider 2019-12-09 15:17:47 -05:00
Kristin Laemmert efafadbe5e command: rename choosePlugins to chooseProviders to clarify scope of function 2019-12-09 09:47:09 -05:00
Kristin Laemmert 9891d0354a
providers: use addrs.Provider as map keys for provider.Factory (#23548)
* terraform/context: use new addrs.Provider as map key in provider factories
* added NewLegacyProviderType and LegacyString funcs to make it explicit that these are temporary placeholders

This PR introduces a new concept, provider fully-qualified name (FQN), encapsulated by the `addrs.Provider` struct.
2019-12-04 11:30:20 -05:00
Kristin Laemmert 6728e521c1
addrs: rename Provider Name to more accurate Provider Type (#23449) 2019-12-02 15:32:31 -05:00
Martin Atkins 39e609d5fd vendor: switch to HCL 2.0 in the HCL repository
Previously we were using the experimental HCL 2 repository, but now we'll
shift over to the v2 import path within the main HCL repository as part of
actually releasing HCL 2.0 as stable.

This is a mechanical search/replace to the new import paths. It also
switches to the v2.0.0 release of HCL, which includes some new code that
Terraform didn't previously have but should not change any behavior that
matters for Terraform's purposes.

For the moment the experimental HCL2 repository is still an indirect
dependency via terraform-config-inspect, so it remains in our go.sum and
vendor directories for the moment. Because terraform-config-inspect uses
a much smaller subset of the HCL2 functionality, this does still manage
to prune the vendor directory a little. A subsequent release of
terraform-config-inspect should allow us to completely remove that old
repository in a future commit.
2019-10-02 15:10:21 -07:00
Kristin Laemmert 120bb0a66c
plugin/discovery: use new addrs.ProviderType in place of a provider typeName string (#22724)
This is a relatively small change meant to lay the foundation for
future enhancements to providers' address.
2019-09-09 16:59:50 -04:00
Kristin Laemmert a16e1fc0a1
command/init: omit a warning if -backend-config is used with no backend (#22164)
* command/init: omit a warning if -backend-config is used with no backend
block

Terraform would silently accept - and swallow - `-backend-config` on the
CLI when there was no `backend` block. Since it is mostly expected to
override existing backend configuration, terraform
should omit a warning if there is no backend configuration to
override.

If the user intended to override the default (local) backend
configuration, they can first add a `backend` block to the `terraform` block to silence the warning (or just ignore it):

```hcl
terraform {
  backend "local" {}
}
```
2019-07-23 08:08:28 -04:00
Alex Pilon 0450f487fa
move IsEmptyDir to configs package 2019-07-18 13:07:10 -04:00
James Bardin 06dfc4abd8 allow setting -backend-config='' to unset override
There is currently no way to unset -backend-config during init, since
not setting that option assumes the user will use the saved config.
Allow setting `-backend-config=""` to specify no overrides.
2019-05-29 12:58:04 -05:00
Pam Selle 346e341ff2 Only display status link if public registry used
Updates to throw a specific error if using the defined public
registry vs. another registry.
2019-04-05 16:49:27 -04:00
Pam Selle ff7245f27c Add status link to make message more helpful 2019-03-27 16:22:37 -04:00
Pam Selle d72456d188 Add friendly error for when registry unresponsive
If the registry is unresponsive, you will now get an error
specific to this, rather than a misleading "provider unavailable" type
error. Also adds debug logging for when errors like this may occur
2019-03-27 14:39:14 -04:00
findkim 161fe47b34 plugin/discovery: improve providery discovery verification errors 2019-03-21 14:38:51 -05:00
Justin Campbell 24e13d8ec1 plugin/discovery: Return tfdiags from Get
Allows us to surface warnings to the user using the tfdiags interfaces.
2019-03-18 12:21:27 -04:00
James Bardin c814f2da37 Change backend.ValidateConfig to PrepareConfig
This mirrors the change made for providers, so that default values can
be inserted into the config by the backend implementation. This is only
the interface and method name changes, it does not yet add any default
values.
2019-02-25 18:37:20 -05:00
findkim 7816e61614 Bump installer protocol version to 5 and separate client and server protocol references 2019-01-16 15:07:57 -06:00
Kim Ngo 41a2376915
Merge pull request #19981 from findkim/colorize-protocol-mismatch-msg
Condense protocol mismatch UI error message
2019-01-14 15:12:09 -06:00
findkim 6e0de3e3f5 Nest incompatible provider protocol error to include dynamic custom msg 2019-01-14 14:56:47 -06:00
Martin Atkins 86c02d5c35 command: "terraform init" can partially initialize for 0.12upgrade
There are a few constructs from 0.11 and prior that cause 0.12 parsing to
fail altogether, which previously created a chicken/egg problem because
we need to install the providers in order to run "terraform 0.12upgrade"
and thus fix the problem.

This changes "terraform init" to use the new "early configuration" loader
for module and provider installation. This is built on the more permissive
parser in the terraform-config-inspect package, and so it allows us to
read out the top-level blocks from the configuration while accepting
legacy HCL syntax.

In the long run this will let us do version compatibility detection before
attempting a "real" config load, giving us better error messages for any
future syntax additions, but in the short term the key thing is that it
allows us to install the dependencies even if the configuration isn't
fully valid.

Because backend init still requires full configuration, this introduces a
new mode of terraform init where it detects heuristically if it seems like
we need to do a configuration upgrade and does a partial init if so,
before finally directing the user to run "terraform 0.12upgrade" before
running any other commands.

The heuristic here is based on two assumptions:
- If the "early" loader finds no errors but the normal loader does, the
  configuration is likely to be valid for Terraform 0.11 but not 0.12.
- If there's already a version constraint in the configuration that
  excludes Terraform versions prior to v0.12 then the configuration is
  probably _already_ upgraded and so it's just a normal syntax error,
  even if the early loader didn't detect it.

Once the upgrade process is removed in 0.13.0 (users will be required to
go stepwise 0.11 -> 0.12 -> 0.13 to upgrade after that), some of this can
be simplified to remove that special mode, but the idea of doing the
dependency version checks against the liberal parser will remain valuable
to increase our chances of reporting version-based incompatibilities
rather than syntax errors as we add new features in future.
2019-01-14 11:33:21 -08:00
Sander van Harmelen ef9054562e commands: make sure the correct flagset is used
A lot of commands used `c.Meta.flagSet()` to create the initial flagset for the command, while quite a few of them didn’t actually use or support the flags that are then added.

So I updated a few commands to use `flag.NewFlagSet()` instead to only add the flags that are actually needed/supported.

Additionally this prevents a few commands from using locking while they actually don’t need locking (as locking is enabled as a default in `c.Meta.flagSet()`.
2018-11-23 16:13:34 +01:00
Martin Atkins 544c2932ce command: Fix TestInit_checkRequiredVersion
In prior refactoring we lost the required core version check from
"terraform init", which we restore here.

Additionally, this test used to have an incorrect name that suggested it
was testing something in the "getProvider" codepath, but version checking
happens regardless of what other options are selected.
2018-11-12 15:19:55 -08:00
Martin Atkins 8b603e4877 command: Name the Terraform Registry specifically in error message
When we originally wrote this message we struggled a bit for how to refer
to the releases server without writing an awkwardly-ungrammatical
sentence, and so "the official repository" became a placeholder name for
it.

Now that we'll be looking in Terraform Registry this gives us a nice
proper noun to use. This message will need to evolve more as our
integration with the registry gets more sophisticated, but for now this
works.
2018-11-09 09:48:03 -08:00
Sander van Harmelen 52a1b22f7a Implement the remote enhanced backend
This is a refactored version of the `remote` backend that was initially added to Terraform v0.11.8 which should now be compatible with v0.12.0.
2018-11-06 16:29:46 +01:00
Martin Atkins 541952bb8f Revert some work that happened since v0.12-dev branched
This work was done against APIs that were already changed in the branch
before work began, and so it doesn't apply to the v0.12 development work.

To allow v0.12 to merge down to master, we'll revert this work out for now
and then re-introduce equivalent functionality in later commits that works
against the new APIs.
2018-10-16 19:48:28 -07:00
Martin Atkins 44bc7519a6 terraform: More wiring in of new provider types
This doesn't actually work yet, but it builds and then panics in a pretty
satisfying way.
2018-10-16 19:12:54 -07:00